Phase
Setup
This does not apply with the current options.
Give each player a board, put out the factory displays for the player count, and fill them with tiles from the bag.
Rulebook page 2
Next
Steps of this phase
- Give each player a board and a marker
- Put out 5 factory displays
- Put out 7 factory displays
- Put out 9 factory displays
- Put all 100 tiles in the bag
- Choose the start player, and fill the factories
Rules for this step
Goal of the gameHow to win
Have the most points at the end of the game. You score when you move tiles to your wall, you lose points for the tiles on your floor line, and you score end bonuses.
End of the game: the game ends after the wall tiling in which a player completed a horizontal row of 5 tiles on their wall. Then add the end bonuses. See End of the game.
Tie: the tied player with more full horizontal rows wins. If that is also a tie, the tied players share the victory. See The most points wins.
Rulebook pages 3, 5, 6 · Open this rule
Components
- 4 player boards, each with a colored side and a gray side.
- 4 scoring markers.
- 9 factory displays.
- 100 tiles: 20 of each of 5 colors.
- 1 bag and 1 starting player marker.
Rulebook page 2 · Open this rule
The player board
- The score track is at the top.
- The 5 pattern lines are on the left. The first line holds 1 tile, and the fifth line holds 5 tiles.
- The wall is on the right: 5 rows of 5 spaces. Each row of the wall is next to the pattern line of the same number.
- The floor line is at the bottom: 7 spaces, each with a negative number.
The colored wall: each row has the 5 colors once, and each row below moves them one space to the right.
Example of 5 by 5 tiles Dark blue tile Yellow tile Red tile Black tile Light blue tile Light blue tile Dark blue tile Yellow tile Red tile Black tile Black tile Light blue tile Dark blue tile Yellow tile Red tile Red tile Black tile Light blue tile Dark blue tile Yellow tile Yellow tile Red tile Black tile Light blue tile Dark blue tile - Dark blue tile
- Yellow tile
- Red tile
- Black tile
- Light blue tile
Rulebook pages 2, 3 · Open this rule
Setup · Step
Give each player a board and a marker
This does not apply with the current options.
Each player takes a player board. All players use the same side: the colored wall in the standard game, or the gray wall in the variant.
Each player puts a scoring marker on space 0 of the score track of their board.
Rulebook page 2
Next
Rules for this step
The player board
- The score track is at the top.
- The 5 pattern lines are on the left. The first line holds 1 tile, and the fifth line holds 5 tiles.
- The wall is on the right: 5 rows of 5 spaces. Each row of the wall is next to the pattern line of the same number.
- The floor line is at the bottom: 7 spaces, each with a negative number.
The colored wall: each row has the 5 colors once, and each row below moves them one space to the right.
Example of 5 by 5 tiles Dark blue tile Yellow tile Red tile Black tile Light blue tile Light blue tile Dark blue tile Yellow tile Red tile Black tile Black tile Light blue tile Dark blue tile Yellow tile Red tile Red tile Black tile Light blue tile Dark blue tile Yellow tile Yellow tile Red tile Black tile Light blue tile Dark blue tile - Dark blue tile
- Yellow tile
- Red tile
- Black tile
- Light blue tile
Rulebook pages 2, 3 · Open this rule
Variant: the gray wall
All players use the gray side of the player board. All other rules stay the same.
When you move a tile from a full pattern line to the wall, you can put it on any space of the wall row of that line.
Each of the 5 vertical columns of your wall can have each color only once.
The rulebook does not say what happens when no space of the row can take the tile. This guide does not decide it: agree on it before you play.
Rulebook page 6 · Open this rule
Goal of the gameHow to win
Have the most points at the end of the game. You score when you move tiles to your wall, you lose points for the tiles on your floor line, and you score end bonuses.
End of the game: the game ends after the wall tiling in which a player completed a horizontal row of 5 tiles on their wall. Then add the end bonuses. See End of the game.
Tie: the tied player with more full horizontal rows wins. If that is also a tie, the tied players share the victory. See The most points wins.
Rulebook pages 3, 5, 6 · Open this rule
Components
- 4 player boards, each with a colored side and a gray side.
- 4 scoring markers.
- 9 factory displays.
- 100 tiles: 20 of each of 5 colors.
- 1 bag and 1 starting player marker.
Rulebook page 2 · Open this rule
Setup · Step
Put out 5 factory displays
Only with 2 Players.
This does not apply with the current options.
With 2 players, put 5 factory displays in a circle. Keep the space in the middle of the circle free: it is the center of the table.
Example: 5 factory displays after they are filled, each with 4 tiles from the bag.
Example of a ring of 5 spaces, clockwise from the top, around Center of the table:
1: 2 × Dark blue tile, Red tile, Black tile
2: Yellow tile, 3 × Light blue tile
3: 2 × Red tile, Black tile, Yellow tile
4: Dark blue tile, Yellow tile, Light blue tile, Black tile
5: 4 × Black tile
- Dark blue tile
- Yellow tile
- Red tile
- Black tile
- Light blue tile
Put the other factory displays, boards, and markers back in the box.
Rulebook page 2
Next
Rules for this step
Goal of the gameHow to win
Have the most points at the end of the game. You score when you move tiles to your wall, you lose points for the tiles on your floor line, and you score end bonuses.
End of the game: the game ends after the wall tiling in which a player completed a horizontal row of 5 tiles on their wall. Then add the end bonuses. See End of the game.
Tie: the tied player with more full horizontal rows wins. If that is also a tie, the tied players share the victory. See The most points wins.
Rulebook pages 3, 5, 6 · Open this rule
Components
- 4 player boards, each with a colored side and a gray side.
- 4 scoring markers.
- 9 factory displays.
- 100 tiles: 20 of each of 5 colors.
- 1 bag and 1 starting player marker.
Rulebook page 2 · Open this rule
The player board
- The score track is at the top.
- The 5 pattern lines are on the left. The first line holds 1 tile, and the fifth line holds 5 tiles.
- The wall is on the right: 5 rows of 5 spaces. Each row of the wall is next to the pattern line of the same number.
- The floor line is at the bottom: 7 spaces, each with a negative number.
The colored wall: each row has the 5 colors once, and each row below moves them one space to the right.
Example of 5 by 5 tiles Dark blue tile Yellow tile Red tile Black tile Light blue tile Light blue tile Dark blue tile Yellow tile Red tile Black tile Black tile Light blue tile Dark blue tile Yellow tile Red tile Red tile Black tile Light blue tile Dark blue tile Yellow tile Yellow tile Red tile Black tile Light blue tile Dark blue tile - Dark blue tile
- Yellow tile
- Red tile
- Black tile
- Light blue tile
Rulebook pages 2, 3 · Open this rule
Setup · Step
Put out 7 factory displays
Only with 3 Players.
This does not apply with the current options.
With 3 players, put 7 factory displays in a circle. Keep the space in the middle of the circle free: it is the center of the table.
Example: 7 factory displays after they are filled, each with 4 tiles from the bag.
Example of a ring of 7 spaces, clockwise from the top, around Center of the table:
1: 2 × Dark blue tile, Red tile, Black tile
2: Yellow tile, 3 × Light blue tile
3: 2 × Red tile, Black tile, Yellow tile
4: Dark blue tile, Yellow tile, Light blue tile, Black tile
5: 4 × Black tile
6: 2 × Yellow tile, 2 × Dark blue tile
7: Red tile, Light blue tile, Dark blue tile, Yellow tile
- Dark blue tile
- Yellow tile
- Red tile
- Black tile
- Light blue tile
Put the other factory displays, boards, and markers back in the box.
Rulebook page 2
Next
Rules for this step
Goal of the gameHow to win
Have the most points at the end of the game. You score when you move tiles to your wall, you lose points for the tiles on your floor line, and you score end bonuses.
End of the game: the game ends after the wall tiling in which a player completed a horizontal row of 5 tiles on their wall. Then add the end bonuses. See End of the game.
Tie: the tied player with more full horizontal rows wins. If that is also a tie, the tied players share the victory. See The most points wins.
Rulebook pages 3, 5, 6 · Open this rule
Components
- 4 player boards, each with a colored side and a gray side.
- 4 scoring markers.
- 9 factory displays.
- 100 tiles: 20 of each of 5 colors.
- 1 bag and 1 starting player marker.
Rulebook page 2 · Open this rule
The player board
- The score track is at the top.
- The 5 pattern lines are on the left. The first line holds 1 tile, and the fifth line holds 5 tiles.
- The wall is on the right: 5 rows of 5 spaces. Each row of the wall is next to the pattern line of the same number.
- The floor line is at the bottom: 7 spaces, each with a negative number.
The colored wall: each row has the 5 colors once, and each row below moves them one space to the right.
Example of 5 by 5 tiles Dark blue tile Yellow tile Red tile Black tile Light blue tile Light blue tile Dark blue tile Yellow tile Red tile Black tile Black tile Light blue tile Dark blue tile Yellow tile Red tile Red tile Black tile Light blue tile Dark blue tile Yellow tile Yellow tile Red tile Black tile Light blue tile Dark blue tile - Dark blue tile
- Yellow tile
- Red tile
- Black tile
- Light blue tile
Rulebook pages 2, 3 · Open this rule
Setup · Step
Put out 9 factory displays
Only with 4 Players.
This does not apply with the current options.
With 4 players, put all 9 factory displays in a circle. Keep the space in the middle of the circle free: it is the center of the table.
Example: all 9 factory displays after they are filled, each with 4 tiles from the bag.
Example of a ring of 9 spaces, clockwise from the top, around Center of the table:
1: 2 × Dark blue tile, Red tile, Black tile
2: Yellow tile, 3 × Light blue tile
3: 2 × Red tile, Black tile, Yellow tile
4: Dark blue tile, Yellow tile, Light blue tile, Black tile
5: 4 × Black tile
6: 2 × Yellow tile, 2 × Dark blue tile
7: Red tile, Light blue tile, Dark blue tile, Yellow tile
8: 2 × Light blue tile, 2 × Red tile
9: Black tile, Dark blue tile, 2 × Yellow tile
- Dark blue tile
- Yellow tile
- Red tile
- Black tile
- Light blue tile
Rulebook page 2
Next
Rules for this step
Goal of the gameHow to win
Have the most points at the end of the game. You score when you move tiles to your wall, you lose points for the tiles on your floor line, and you score end bonuses.
End of the game: the game ends after the wall tiling in which a player completed a horizontal row of 5 tiles on their wall. Then add the end bonuses. See End of the game.
Tie: the tied player with more full horizontal rows wins. If that is also a tie, the tied players share the victory. See The most points wins.
Rulebook pages 3, 5, 6 · Open this rule
Components
- 4 player boards, each with a colored side and a gray side.
- 4 scoring markers.
- 9 factory displays.
- 100 tiles: 20 of each of 5 colors.
- 1 bag and 1 starting player marker.
Rulebook page 2 · Open this rule
The player board
- The score track is at the top.
- The 5 pattern lines are on the left. The first line holds 1 tile, and the fifth line holds 5 tiles.
- The wall is on the right: 5 rows of 5 spaces. Each row of the wall is next to the pattern line of the same number.
- The floor line is at the bottom: 7 spaces, each with a negative number.
The colored wall: each row has the 5 colors once, and each row below moves them one space to the right.
Example of 5 by 5 tiles Dark blue tile Yellow tile Red tile Black tile Light blue tile Light blue tile Dark blue tile Yellow tile Red tile Black tile Black tile Light blue tile Dark blue tile Yellow tile Red tile Red tile Black tile Light blue tile Dark blue tile Yellow tile Yellow tile Red tile Black tile Light blue tile Dark blue tile - Dark blue tile
- Yellow tile
- Red tile
- Black tile
- Light blue tile
Rulebook pages 2, 3 · Open this rule
Setup · Step
Put all 100 tiles in the bag
This does not apply with the current options.
Put all 100 tiles in the bag: 20 tiles of each of the 5 colors.
Rulebook page 2
Next
Rules for this step
The bag and the box lid
Draw new tiles at random from the bag. Tiles that leave a board go to the box lid, not back to the bag.
When the bag is empty, put all tiles from the lid back in the bag.
If the bag and the lid are both empty, start the round with the factory displays that are not full.
Rulebook pages 4, 5 · Open this rule
Goal of the gameHow to win
Have the most points at the end of the game. You score when you move tiles to your wall, you lose points for the tiles on your floor line, and you score end bonuses.
End of the game: the game ends after the wall tiling in which a player completed a horizontal row of 5 tiles on their wall. Then add the end bonuses. See End of the game.
Tie: the tied player with more full horizontal rows wins. If that is also a tie, the tied players share the victory. See The most points wins.
Rulebook pages 3, 5, 6 · Open this rule
Components
- 4 player boards, each with a colored side and a gray side.
- 4 scoring markers.
- 9 factory displays.
- 100 tiles: 20 of each of 5 colors.
- 1 bag and 1 starting player marker.
Rulebook page 2 · Open this rule
The player board
- The score track is at the top.
- The 5 pattern lines are on the left. The first line holds 1 tile, and the fifth line holds 5 tiles.
- The wall is on the right: 5 rows of 5 spaces. Each row of the wall is next to the pattern line of the same number.
- The floor line is at the bottom: 7 spaces, each with a negative number.
The colored wall: each row has the 5 colors once, and each row below moves them one space to the right.
Example of 5 by 5 tiles Dark blue tile Yellow tile Red tile Black tile Light blue tile Light blue tile Dark blue tile Yellow tile Red tile Black tile Black tile Light blue tile Dark blue tile Yellow tile Red tile Red tile Black tile Light blue tile Dark blue tile Yellow tile Yellow tile Red tile Black tile Light blue tile Dark blue tile - Dark blue tile
- Yellow tile
- Red tile
- Black tile
- Light blue tile
Rulebook pages 2, 3 · Open this rule
Setup · Step
Choose the start player, and fill the factories
This does not apply with the current options.
Choose a start player. The rulebook suggests the player who was in Portugal most recently. That player takes the starting player marker.
The start player draws tiles from the bag at random and puts exactly 4 tiles on each factory display.
Rulebook page 2
Next
Rules for this step
The starting player marker
At the start of each factory offer, the start player puts the marker in the center of the table.
The first player in a round who takes tiles from the center also takes the marker, and puts it on the leftmost free space of their floor line. There it counts as a tile: it costs points.
After the floor line penalty, that player keeps the marker in front of them. That player fills the factories and starts the next round.
Rulebook pages 3, 5 · Open this rule
Goal of the gameHow to win
Have the most points at the end of the game. You score when you move tiles to your wall, you lose points for the tiles on your floor line, and you score end bonuses.
End of the game: the game ends after the wall tiling in which a player completed a horizontal row of 5 tiles on their wall. Then add the end bonuses. See End of the game.
Tie: the tied player with more full horizontal rows wins. If that is also a tie, the tied players share the victory. See The most points wins.
Rulebook pages 3, 5, 6 · Open this rule
Components
- 4 player boards, each with a colored side and a gray side.
- 4 scoring markers.
- 9 factory displays.
- 100 tiles: 20 of each of 5 colors.
- 1 bag and 1 starting player marker.
Rulebook page 2 · Open this rule
The player board
- The score track is at the top.
- The 5 pattern lines are on the left. The first line holds 1 tile, and the fifth line holds 5 tiles.
- The wall is on the right: 5 rows of 5 spaces. Each row of the wall is next to the pattern line of the same number.
- The floor line is at the bottom: 7 spaces, each with a negative number.
The colored wall: each row has the 5 colors once, and each row below moves them one space to the right.
Example of 5 by 5 tiles Dark blue tile Yellow tile Red tile Black tile Light blue tile Light blue tile Dark blue tile Yellow tile Red tile Black tile Black tile Light blue tile Dark blue tile Yellow tile Red tile Red tile Black tile Light blue tile Dark blue tile Yellow tile Yellow tile Red tile Black tile Light blue tile Dark blue tile - Dark blue tile
- Yellow tile
- Red tile
- Black tile
- Light blue tile
Rulebook pages 2, 3 · Open this rule
Phase
A. Factory offer
This does not apply with the current options.
A round has three phases: the factory offer, the wall tiling, and the preparation of the next round.
In the factory offer, players take tiles in turn, clockwise, until no tile is left on the factories or in the center. Players put the tiles on their pattern lines.
Rulebook page 3
Next
Steps of this phase
- Put the start marker in the center
- Take tiles from where?
- Take one color from a factory
- Take one color from the center
- Put the tiles on one pattern line
- Are the factories and the center empty?
Rules for this step
What a pattern line can hold
- A pattern line holds tiles of only one color. If it has tiles, you can add only tiles of that color.
- A line with all its spaces filled is full. You cannot add tiles to a full line.
- You cannot put tiles of a color on a pattern line when the wall row of that line already has a tile of that color.
- Tiles that you cannot put on the line, or do not want to, go to the floor line.
Rulebook pages 3, 4 · Open this rule
The floor line
Tiles that you take but cannot or do not want to put on a pattern line go to your floor line. Fill it from left to right.
If the 7 spaces are full, put the other tiles in the box lid.
At the end of the wall tiling, each tile on the floor line costs the points above its space. From left to right:
- Spaces 1 and 2: 1 point each.
- Spaces 3, 4, and 5: 2 points each.
- Spaces 6 and 7: 3 points each.
A full floor line costs 14 points. Your score cannot go below 0.
Rulebook pages 4, 5 · Open this rule
A. Factory offer · Step
Put the start marker in the center
This does not apply with the current options.
The start player puts the starting player marker in the center of the table, and takes the first turn. Then play goes clockwise.
Rulebook page 3
Next
Rules for this step
The starting player marker
At the start of each factory offer, the start player puts the marker in the center of the table.
The first player in a round who takes tiles from the center also takes the marker, and puts it on the leftmost free space of their floor line. There it counts as a tile: it costs points.
After the floor line penalty, that player keeps the marker in front of them. That player fills the factories and starts the next round.
Rulebook pages 3, 5 · Open this rule
What a pattern line can hold
- A pattern line holds tiles of only one color. If it has tiles, you can add only tiles of that color.
- A line with all its spaces filled is full. You cannot add tiles to a full line.
- You cannot put tiles of a color on a pattern line when the wall row of that line already has a tile of that color.
- Tiles that you cannot put on the line, or do not want to, go to the floor line.
Rulebook pages 3, 4 · Open this rule
The floor line
Tiles that you take but cannot or do not want to put on a pattern line go to your floor line. Fill it from left to right.
If the 7 spaces are full, put the other tiles in the box lid.
At the end of the wall tiling, each tile on the floor line costs the points above its space. From left to right:
- Spaces 1 and 2: 1 point each.
- Spaces 3, 4, and 5: 2 points each.
- Spaces 6 and 7: 3 points each.
A full floor line costs 14 points. Your score cannot go below 0.
Rulebook pages 4, 5 · Open this rule
A. Factory offer · Decision
Take tiles from where?
This does not apply with the current options.
On your turn, you must take tiles. Take all tiles of one color, either from one factory display or from the center of the table.
Rulebook page 3
Choose
Rules for this step
What a pattern line can hold
- A pattern line holds tiles of only one color. If it has tiles, you can add only tiles of that color.
- A line with all its spaces filled is full. You cannot add tiles to a full line.
- You cannot put tiles of a color on a pattern line when the wall row of that line already has a tile of that color.
- Tiles that you cannot put on the line, or do not want to, go to the floor line.
Rulebook pages 3, 4 · Open this rule
The floor line
Tiles that you take but cannot or do not want to put on a pattern line go to your floor line. Fill it from left to right.
If the 7 spaces are full, put the other tiles in the box lid.
At the end of the wall tiling, each tile on the floor line costs the points above its space. From left to right:
- Spaces 1 and 2: 1 point each.
- Spaces 3, 4, and 5: 2 points each.
- Spaces 6 and 7: 3 points each.
A full floor line costs 14 points. Your score cannot go below 0.
Rulebook pages 4, 5 · Open this rule
A. Factory offer · Step
Take one color from a factory
This does not apply with the current options.
Choose one factory display and one color on it. Take all tiles of that color from the display.
Push the other tiles of that display into the center of the table.
Rulebook page 3
Next
Rules for this step
What a pattern line can hold
- A pattern line holds tiles of only one color. If it has tiles, you can add only tiles of that color.
- A line with all its spaces filled is full. You cannot add tiles to a full line.
- You cannot put tiles of a color on a pattern line when the wall row of that line already has a tile of that color.
- Tiles that you cannot put on the line, or do not want to, go to the floor line.
Rulebook pages 3, 4 · Open this rule
The floor line
Tiles that you take but cannot or do not want to put on a pattern line go to your floor line. Fill it from left to right.
If the 7 spaces are full, put the other tiles in the box lid.
At the end of the wall tiling, each tile on the floor line costs the points above its space. From left to right:
- Spaces 1 and 2: 1 point each.
- Spaces 3, 4, and 5: 2 points each.
- Spaces 6 and 7: 3 points each.
A full floor line costs 14 points. Your score cannot go below 0.
Rulebook pages 4, 5 · Open this rule
A. Factory offer · Step
Take one color from the center
This does not apply with the current options.
Choose one color in the center of the table, and take all tiles of that color from the center.
If you are the first player in this round who takes tiles from the center, also take the starting player marker. Put it on the leftmost free space of your floor line.
Rulebook page 3
Next
Rules for this step
The starting player marker
At the start of each factory offer, the start player puts the marker in the center of the table.
The first player in a round who takes tiles from the center also takes the marker, and puts it on the leftmost free space of their floor line. There it counts as a tile: it costs points.
After the floor line penalty, that player keeps the marker in front of them. That player fills the factories and starts the next round.
Rulebook pages 3, 5 · Open this rule
The floor line
Tiles that you take but cannot or do not want to put on a pattern line go to your floor line. Fill it from left to right.
If the 7 spaces are full, put the other tiles in the box lid.
At the end of the wall tiling, each tile on the floor line costs the points above its space. From left to right:
- Spaces 1 and 2: 1 point each.
- Spaces 3, 4, and 5: 2 points each.
- Spaces 6 and 7: 3 points each.
A full floor line costs 14 points. Your score cannot go below 0.
Rulebook pages 4, 5 · Open this rule
What a pattern line can hold
- A pattern line holds tiles of only one color. If it has tiles, you can add only tiles of that color.
- A line with all its spaces filled is full. You cannot add tiles to a full line.
- You cannot put tiles of a color on a pattern line when the wall row of that line already has a tile of that color.
- Tiles that you cannot put on the line, or do not want to, go to the floor line.
Rulebook pages 3, 4 · Open this rule
A. Factory offer · Step
Put the tiles on one pattern line
This does not apply with the current options.
Put all the tiles that you took on one of your 5 pattern lines. Fill the line from right to left, one tile at a time.
Tiles that do not fit on the line go to your floor line. You can also put all of the tiles on the floor line.
Try to fill your pattern lines: in the wall tiling, only a full line moves a tile to your wall.
Rulebook pages 3, 4
Next
Rules for this step
What a pattern line can hold
- A pattern line holds tiles of only one color. If it has tiles, you can add only tiles of that color.
- A line with all its spaces filled is full. You cannot add tiles to a full line.
- You cannot put tiles of a color on a pattern line when the wall row of that line already has a tile of that color.
- Tiles that you cannot put on the line, or do not want to, go to the floor line.
Rulebook pages 3, 4 · Open this rule
The floor line
Tiles that you take but cannot or do not want to put on a pattern line go to your floor line. Fill it from left to right.
If the 7 spaces are full, put the other tiles in the box lid.
At the end of the wall tiling, each tile on the floor line costs the points above its space. From left to right:
- Spaces 1 and 2: 1 point each.
- Spaces 3, 4, and 5: 2 points each.
- Spaces 6 and 7: 3 points each.
A full floor line costs 14 points. Your score cannot go below 0.
Rulebook pages 4, 5 · Open this rule
A. Factory offer · Decision
Are the factories and the center empty?
This does not apply with the current options.
The factory offer continues until no tile is left on the factory displays and in the center of the table.
If tiles are left, the next player clockwise takes a turn.
Rulebook page 4
Choose
Rules for this step
What a pattern line can hold
- A pattern line holds tiles of only one color. If it has tiles, you can add only tiles of that color.
- A line with all its spaces filled is full. You cannot add tiles to a full line.
- You cannot put tiles of a color on a pattern line when the wall row of that line already has a tile of that color.
- Tiles that you cannot put on the line, or do not want to, go to the floor line.
Rulebook pages 3, 4 · Open this rule
The floor line
Tiles that you take but cannot or do not want to put on a pattern line go to your floor line. Fill it from left to right.
If the 7 spaces are full, put the other tiles in the box lid.
At the end of the wall tiling, each tile on the floor line costs the points above its space. From left to right:
- Spaces 1 and 2: 1 point each.
- Spaces 3, 4, and 5: 2 points each.
- Spaces 6 and 7: 3 points each.
A full floor line costs 14 points. Your score cannot go below 0.
Rulebook pages 4, 5 · Open this rule
Phase
B. Wall tiling
This does not apply with the current options.
All players can do this phase at the same time. Move tiles from your full pattern lines to your wall, score them, and then lose points for your floor line.
Rulebook page 4
Next
Steps of this phase
- Move a tile from each full line to the wall
- Discard the rest of the full lines
- Lose points for your floor line
- Does a wall have a full row?
Rules for this step
Score a tile on the wall
Each tile that you move to the wall scores at once:
- If no tile touches it horizontally or vertically: 1 point.
- Else, count the tiles in the unbroken horizontal line that holds the new tile, the new tile included, if that line has 2 or more tiles. Then count the tiles in the unbroken vertical line in the same way. Score both counts.
For example, a new tile in a horizontal line of 4 and a vertical line of 3 scores 7 points.
The scorecard asks for your score track total after the last floor line penalty.
Rulebook page 5 · Open this rule
B. Wall tiling · Step
Move a tile from each full line to the wall
This does not apply with the current options.
Look at your pattern lines from the top to the bottom. For each full line, move its rightmost tile to the space of the same color in the same row of your wall.
Score each tile at once, when you put it on the wall. A line that is not full stays as it is.
Rulebook pages 4, 5
Next
Rules for this step
Score a tile on the wall
Each tile that you move to the wall scores at once:
- If no tile touches it horizontally or vertically: 1 point.
- Else, count the tiles in the unbroken horizontal line that holds the new tile, the new tile included, if that line has 2 or more tiles. Then count the tiles in the unbroken vertical line in the same way. Score both counts.
For example, a new tile in a horizontal line of 4 and a vertical line of 3 scores 7 points.
The scorecard asks for your score track total after the last floor line penalty.
Rulebook page 5 · Open this rule
Variant: the gray wall
All players use the gray side of the player board. All other rules stay the same.
When you move a tile from a full pattern line to the wall, you can put it on any space of the wall row of that line.
Each of the 5 vertical columns of your wall can have each color only once.
The rulebook does not say what happens when no space of the row can take the tile. This guide does not decide it: agree on it before you play.
Rulebook page 6 · Open this rule
B. Wall tiling · Step
Discard the rest of the full lines
This does not apply with the current options.
Remove all tiles from each pattern line that has no tile on its rightmost space now. Put them in the box lid.
The tiles on the other pattern lines stay on your board for the next round.
Rulebook page 4
Next
Rules for this step
The bag and the box lid
Draw new tiles at random from the bag. Tiles that leave a board go to the box lid, not back to the bag.
When the bag is empty, put all tiles from the lid back in the bag.
If the bag and the lid are both empty, start the round with the factory displays that are not full.
Rulebook pages 4, 5 · Open this rule
Score a tile on the wall
Each tile that you move to the wall scores at once:
- If no tile touches it horizontally or vertically: 1 point.
- Else, count the tiles in the unbroken horizontal line that holds the new tile, the new tile included, if that line has 2 or more tiles. Then count the tiles in the unbroken vertical line in the same way. Score both counts.
For example, a new tile in a horizontal line of 4 and a vertical line of 3 scores 7 points.
The scorecard asks for your score track total after the last floor line penalty.
Rulebook page 5 · Open this rule
B. Wall tiling · Step
Lose points for your floor line
This does not apply with the current options.
For each tile on your floor line, lose the points that show above its space. Move your marker back on the score track. Your score cannot go below 0.
Then put the floor line tiles in the box lid. If the starting player marker is on your floor line, it counts as a tile, but put it in front of you, not in the lid.
Example from the rulebook (page 5): Peter has 4 tiles and the starting player marker on his floor line. Each piece shows the points of its space. He loses 1 + 1 + 2 + 2 + 2 = 8 points. The 2 empty spaces would cost 3 points each:
| Dark blue tile | Starting player marker | Light blue tile | Light blue tile | Yellow tile | Empty, -3 | Empty, -3 |
- Dark blue tile
- Starting player marker
- Light blue tile
- Yellow tile
Rulebook page 5
Next
Rules for this step
The floor line
Tiles that you take but cannot or do not want to put on a pattern line go to your floor line. Fill it from left to right.
If the 7 spaces are full, put the other tiles in the box lid.
At the end of the wall tiling, each tile on the floor line costs the points above its space. From left to right:
- Spaces 1 and 2: 1 point each.
- Spaces 3, 4, and 5: 2 points each.
- Spaces 6 and 7: 3 points each.
A full floor line costs 14 points. Your score cannot go below 0.
Rulebook pages 4, 5 · Open this rule
The starting player marker
At the start of each factory offer, the start player puts the marker in the center of the table.
The first player in a round who takes tiles from the center also takes the marker, and puts it on the leftmost free space of their floor line. There it counts as a tile: it costs points.
After the floor line penalty, that player keeps the marker in front of them. That player fills the factories and starts the next round.
Rulebook pages 3, 5 · Open this rule
Score a tile on the wall
Each tile that you move to the wall scores at once:
- If no tile touches it horizontally or vertically: 1 point.
- Else, count the tiles in the unbroken horizontal line that holds the new tile, the new tile included, if that line has 2 or more tiles. Then count the tiles in the unbroken vertical line in the same way. Score both counts.
For example, a new tile in a horizontal line of 4 and a vertical line of 3 scores 7 points.
The scorecard asks for your score track total after the last floor line penalty.
Rulebook page 5 · Open this rule
B. Wall tiling · Decision
Does a wall have a full row?
This does not apply with the current options.
The game ends after this wall tiling when at least one player has a full horizontal row of 5 tiles on their wall.
If no player has a full row, prepare the next round.
Rulebook pages 5, 6
Choose
Rules for this step
Score a tile on the wall
Each tile that you move to the wall scores at once:
- If no tile touches it horizontally or vertically: 1 point.
- Else, count the tiles in the unbroken horizontal line that holds the new tile, the new tile included, if that line has 2 or more tiles. Then count the tiles in the unbroken vertical line in the same way. Score both counts.
For example, a new tile in a horizontal line of 4 and a vertical line of 3 scores 7 points.
The scorecard asks for your score track total after the last floor line penalty.
Rulebook page 5 · Open this rule
Phase
C. Prepare the next round
This does not apply with the current options.
The player with the starting player marker fills the factory displays again, and starts the next round.
Rulebook page 5
Next
Steps of this phase
Rules for this step
The bag and the box lid
Draw new tiles at random from the bag. Tiles that leave a board go to the box lid, not back to the bag.
When the bag is empty, put all tiles from the lid back in the bag.
If the bag and the lid are both empty, start the round with the factory displays that are not full.
Rulebook pages 4, 5 · Open this rule
C. Prepare the next round · Step
Fill each factory with 4 tiles
This does not apply with the current options.
The player with the starting player marker puts 4 tiles from the bag on each factory display, as in the setup.
If the bag is empty, put all tiles from the box lid in the bag, and fill the other displays.
If the bag and the lid are both empty, start the round with the displays that you could fill.
Rulebook page 5
Next
Rules for this step
The bag and the box lid
Draw new tiles at random from the bag. Tiles that leave a board go to the box lid, not back to the bag.
When the bag is empty, put all tiles from the lid back in the bag.
If the bag and the lid are both empty, start the round with the factory displays that are not full.
Rulebook pages 4, 5 · Open this rule
Phase
End of the game
This does not apply with the current options.
The game ends after the wall tiling in which a player completed a horizontal row of 5 tiles. Add the end bonuses to the score tracks.
Rulebook page 6
Next
Steps of this phase
End of the game · Step
Score the end bonuses
This does not apply with the current options.
Each player adds points for their wall:
- Each full horizontal row of 5 tiles: 2 points.
- Each full vertical column of 5 tiles: 7 points.
- Each color with all 5 of its tiles on the wall: 10 points.
Rulebook page 6
Next
Rules for this step
End bonus: full rows
At the end of the game, score 2 points for each full horizontal row of 5 tiles on your wall.
The number of full rows also breaks a tie for the most points.
Rulebook page 6 · Open this rule
End bonus: full columns
At the end of the game, score 7 points for each full vertical column of 5 tiles on your wall.
Rulebook page 6 · Open this rule
End bonus: full colors
At the end of the game, score 10 points for each color that has all 5 of its tiles on your wall.
Rulebook page 6 · Open this rule
End of the game · End
The most points wins
This does not apply with the current options.
The player with the most points on the score track wins.
In a tie, the tied player with more full horizontal rows wins. If that is also a tie, the tied players share the victory.
Rulebook page 6
The game is over. Select Start over for a new game.
RuleHow to win
Goal of the game
This does not apply with the current options.
Have the most points at the end of the game. You score when you move tiles to your wall, you lose points for the tiles on your floor line, and you score end bonuses.
End of the game: the game ends after the wall tiling in which a player completed a horizontal row of 5 tiles on their wall. Then add the end bonuses. See End of the game.
Tie: the tied player with more full horizontal rows wins. If that is also a tie, the tied players share the victory. See The most points wins.
Rulebook pages 3, 5, 6
Rule
Components
This does not apply with the current options.
- 4 player boards, each with a colored side and a gray side.
- 4 scoring markers.
- 9 factory displays.
- 100 tiles: 20 of each of 5 colors.
- 1 bag and 1 starting player marker.
Rulebook page 2
Rule
The player board
This does not apply with the current options.
- The score track is at the top.
- The 5 pattern lines are on the left. The first line holds 1 tile, and the fifth line holds 5 tiles.
- The wall is on the right: 5 rows of 5 spaces. Each row of the wall is next to the pattern line of the same number.
- The floor line is at the bottom: 7 spaces, each with a negative number.
The colored wall: each row has the 5 colors once, and each row below moves them one space to the right.
| Dark blue tile | Yellow tile | Red tile | Black tile | Light blue tile |
| Light blue tile | Dark blue tile | Yellow tile | Red tile | Black tile |
| Black tile | Light blue tile | Dark blue tile | Yellow tile | Red tile |
| Red tile | Black tile | Light blue tile | Dark blue tile | Yellow tile |
| Yellow tile | Red tile | Black tile | Light blue tile | Dark blue tile |
- Dark blue tile
- Yellow tile
- Red tile
- Black tile
- Light blue tile
Rulebook pages 2, 3
Rule
What a pattern line can hold
This does not apply with the current options.
- A pattern line holds tiles of only one color. If it has tiles, you can add only tiles of that color.
- A line with all its spaces filled is full. You cannot add tiles to a full line.
- You cannot put tiles of a color on a pattern line when the wall row of that line already has a tile of that color.
- Tiles that you cannot put on the line, or do not want to, go to the floor line.
Rulebook pages 3, 4
See also
The floor line
Tiles that you take but cannot or do not want to put on a pattern line go to your floor line. Fill it from left to right.
If the 7 spaces are full, put the other tiles in the box lid.
At the end of the wall tiling, each tile on the floor line costs the points above its space. From left to right:
- Spaces 1 and 2: 1 point each.
- Spaces 3, 4, and 5: 2 points each.
- Spaces 6 and 7: 3 points each.
A full floor line costs 14 points. Your score cannot go below 0.
Rulebook pages 4, 5 · Open this rule
Rule
The floor line
This does not apply with the current options.
Tiles that you take but cannot or do not want to put on a pattern line go to your floor line. Fill it from left to right.
If the 7 spaces are full, put the other tiles in the box lid.
At the end of the wall tiling, each tile on the floor line costs the points above its space. From left to right:
- Spaces 1 and 2: 1 point each.
- Spaces 3, 4, and 5: 2 points each.
- Spaces 6 and 7: 3 points each.
A full floor line costs 14 points. Your score cannot go below 0.
Rulebook pages 4, 5
Rule
The starting player marker
This does not apply with the current options.
At the start of each factory offer, the start player puts the marker in the center of the table.
The first player in a round who takes tiles from the center also takes the marker, and puts it on the leftmost free space of their floor line. There it counts as a tile: it costs points.
After the floor line penalty, that player keeps the marker in front of them. That player fills the factories and starts the next round.
Rulebook pages 3, 5
Rule
The bag and the box lid
This does not apply with the current options.
Draw new tiles at random from the bag. Tiles that leave a board go to the box lid, not back to the bag.
When the bag is empty, put all tiles from the lid back in the bag.
If the bag and the lid are both empty, start the round with the factory displays that are not full.
Rulebook pages 4, 5
Rule
Score a tile on the wall
This does not apply with the current options.
Each tile that you move to the wall scores at once:
- If no tile touches it horizontally or vertically: 1 point.
- Else, count the tiles in the unbroken horizontal line that holds the new tile, the new tile included, if that line has 2 or more tiles. Then count the tiles in the unbroken vertical line in the same way. Score both counts.
For example, a new tile in a horizontal line of 4 and a vertical line of 3 scores 7 points.
The scorecard asks for your score track total after the last floor line penalty.
Rulebook page 5
See also
The floor line
Tiles that you take but cannot or do not want to put on a pattern line go to your floor line. Fill it from left to right.
If the 7 spaces are full, put the other tiles in the box lid.
At the end of the wall tiling, each tile on the floor line costs the points above its space. From left to right:
- Spaces 1 and 2: 1 point each.
- Spaces 3, 4, and 5: 2 points each.
- Spaces 6 and 7: 3 points each.
A full floor line costs 14 points. Your score cannot go below 0.
Rulebook pages 4, 5 · Open this rule
Rule
Variant: the gray wall
Only with Gray wall variant.
This does not apply with the current options.
All players use the gray side of the player board. All other rules stay the same.
When you move a tile from a full pattern line to the wall, you can put it on any space of the wall row of that line.
Each of the 5 vertical columns of your wall can have each color only once.
The rulebook does not say what happens when no space of the row can take the tile. This guide does not decide it: agree on it before you play.
Rulebook page 6
Rule
End bonus: full rows
This does not apply with the current options.
At the end of the game, score 2 points for each full horizontal row of 5 tiles on your wall.
The number of full rows also breaks a tie for the most points.
Rulebook page 6
Rule
End bonus: full columns
This does not apply with the current options.
At the end of the game, score 7 points for each full vertical column of 5 tiles on your wall.
Rulebook page 6
Rule
End bonus: full colors
This does not apply with the current options.
At the end of the game, score 10 points for each color that has all 5 of its tiles on your wall.
Rulebook page 6
The steps in order
- Phase: Setup, then Give each player a board and a marker.
- Step: Give each player a board and a marker, then Put out 5 factory displays; or Put out 7 factory displays; or Put out 9 factory displays.
- Step: Put out 5 factory displays, then Put all 100 tiles in the bag.
- Step: Put out 7 factory displays, then Put all 100 tiles in the bag.
- Step: Put out 9 factory displays, then Put all 100 tiles in the bag.
- Step: Put all 100 tiles in the bag, then Choose the start player, and fill the factories.
- Step: Choose the start player, and fill the factories, then A. Factory offer.
- Phase: A. Factory offer, then Put the start marker in the center.
- Step: Put the start marker in the center, then Take tiles from where?.
- Decision: Take tiles from where?, then A factory display: Take one color from a factory; or The center: Take one color from the center.
- Step: Take one color from a factory, then Put the tiles on one pattern line.
- Step: Take one color from the center, then Put the tiles on one pattern line.
- Step: Put the tiles on one pattern line, then Are the factories and the center empty?.
- Decision: Are the factories and the center empty?, then No: next player: Take tiles from where?; or Yes: wall tiling: B. Wall tiling.
- Phase: B. Wall tiling, then Move a tile from each full line to the wall.
- Step: Move a tile from each full line to the wall, then Discard the rest of the full lines.
- Step: Discard the rest of the full lines, then Lose points for your floor line.
- Step: Lose points for your floor line, then Does a wall have a full row?.
- Decision: Does a wall have a full row?, then No: next round: C. Prepare the next round; or Yes: the game ends: End of the game.
- Phase: C. Prepare the next round, then Fill each factory with 4 tiles.
- Step: Fill each factory with 4 tiles, then A. Factory offer.
- Phase: End of the game, then Score the end bonuses.
- Step: Score the end bonuses, then The most points wins.
- End: The most points wins
Reference rules
- Goal of the gameHow to win
- Components
- The player board
- What a pattern line can hold
- The floor line
- The starting player marker
- The bag and the box lid
- Score a tile on the wall
- Variant: the gray wall
- End bonus: full rows
- End bonus: full columns
- End bonus: full colors