Between Two Cities rules
Pages refer to the Between Two Cities rulebook (first edition, English).
Phase
Setup
This does not apply with the current options.
Sit around the table, and prepare a city between each two players who sit side by side. You build each city with one of your two neighbors.
Leave the same space between all players: each city goes in the space between two players. Put a city token in each space, and the matching token next to the scoreboard.
Put the duplex tiles in face-down stacks. Shuffle the building tiles face down in the box.
Rulebook page 2
Next
Steps of this phase
Rules for this step
Components
- 108 building tiles (square).
- 24 duplex tiles (rectangular).
- 14 city tokens, in 7 pairs.
- 1 scoreboard.
- 7 reference cards.
- 15 seating randomizer cards.
Rulebook page 1 · Open this rule
Goal
Build two cities, one with the player on your left and one with the player on your right. At the end, each city scores for its buildings.
Your final score is the lower score of your two cities. Give the same care to both cities.
Rulebook page 1 · Open this rule
Setup · Step
Choose the seats
This does not apply with the current options.
Shuffle the seating randomizer cards, and draw the top card. Sit clockwise in the order that the card tells, for example in the alphabetical order of the cities where you were born.
Random seats: deal one randomizer card to each player. Sit clockwise from the lowest number in the top left corner of the cards to the highest.
Rulebook page 2
Next
Rules for this step
Components
- 108 building tiles (square).
- 24 duplex tiles (rectangular).
- 14 city tokens, in 7 pairs.
- 1 scoreboard.
- 7 reference cards.
- 15 seating randomizer cards.
Rulebook page 1 · Open this rule
Goal
Build two cities, one with the player on your left and one with the player on your right. At the end, each city scores for its buildings.
Your final score is the lower score of your two cities. Give the same care to both cities.
Rulebook page 1 · Open this rule
Setup · Step
Mark each city
This does not apply with the current options.
Put the scoreboard in the middle of the table. Put one city token in the space between each two players, and the token of the same city next to the scoreboard. Give each player a reference card.
With 3 to 7 players, the table has one city for each player. With 2 players, each player builds two cities alone, so the table has four cities.
Rulebook pages 2, 7
Next
Rules for this step
The 2-player variant
Each player builds two cities alone, one on the left and one on the right. The table has four cities.
In each turn, choose 2 tiles, and put 1 in each of your cities. Pass the rest of the hand to your opponent.
Play each round two times. So play rounds 1a and 1b (7 building tiles), 2a and 2b (3 duplex tiles, place 2), and 3a and 3b (7 building tiles).
Score each city as in the game for 3 to 7 players. Your final score is the sum of your two cities. For a tie, use only the second tiebreaker.
Without partners, this game can be more aggressive: you choose what your opponent gets when you pass tiles.
Rulebook page 7 · Open this rule
Components
- 108 building tiles (square).
- 24 duplex tiles (rectangular).
- 14 city tokens, in 7 pairs.
- 1 scoreboard.
- 7 reference cards.
- 15 seating randomizer cards.
Rulebook page 1 · Open this rule
Goal
Build two cities, one with the player on your left and one with the player on your right. At the end, each city scores for its buildings.
Your final score is the lower score of your two cities. Give the same care to both cities.
Rulebook page 1 · Open this rule
Setup · Step
Shuffle the tiles
This does not apply with the current options.
Shuffle the duplex tiles and put them in face-down stacks next to the scoreboard.
Put the box in the middle of the table, with all the square building tiles face down in it. Shuffle the tiles in the box.
Rulebook page 2
Next
Rules for this step
Components
- 108 building tiles (square).
- 24 duplex tiles (rectangular).
- 14 city tokens, in 7 pairs.
- 1 scoreboard.
- 7 reference cards.
- 15 seating randomizer cards.
Rulebook page 1 · Open this rule
Goal
Build two cities, one with the player on your left and one with the player on your right. At the end, each city scores for its buildings.
Your final score is the lower score of your two cities. Give the same care to both cities.
Rulebook page 1 · Open this rule
Phase
Round one
This does not apply with the current options.
Each player draws 7 building tiles. In each turn, all players choose 2 tiles at the same time, pass the rest to the left, and place 1 tile in each of their two cities.
Choose in secret, and put the rest of your hand under the city token on your left. Then reveal and place: talk with your partners only now.
After 3 turns, 1 tile is left: discard it. Each city then has 6 tiles.
Rulebook pages 2, 3, 8
Next
Steps of this phase
- Draw 7 building tiles
- Choose 2 tiles
- Reveal your tiles
- Place 1 tile in each city
- Is more than 1 tile under the token on your right?
- Discard the last tile
- Did you play round one two times?
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round one · Step
Draw 7 building tiles
This does not apply with the current options.
Draw 7 building tiles from the box. This is your hand.
Rulebook page 3
Next
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round one · Step
Choose 2 tiles
This does not apply with the current options.
Choose 2 tiles from your hand in secret, and put them face down in front of you. Put the other tiles face down above the city on your left, and put its city token on them. The token tells the table that you are ready.
You cannot change your choice after this, and you cannot look again at the tiles that you passed.
- 2 players: pass the other tiles to your opponent.
Rulebook pages 3, 7
Next
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round one · Step
Reveal your tiles
This does not apply with the current options.
When each city token has a stack of tiles under it, all players turn their 2 chosen tiles face up at the same time.
Rulebook page 3
Next
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round one · Step
Place 1 tile in each city
This does not apply with the current options.
Put one of your tiles in the city on your left, and the other in the city on your right. Talk openly with your two partners about which tile goes in which city, and where.
Put each tile upright, next to a tile of the city, so that the city can still be a square of 4 by 4 spaces. A placed tile does not move again.
Rulebook page 3
Next
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round one · Decision
Is more than 1 tile under the token on your right?
This does not apply with the current options.
Look at the stack under the city token on your right: your neighbor passed it to you.
- More than 1 tile: take the stack as your new hand, and choose again.
- Only 1 tile: the round ends.
The hand of 7 tiles gives 3 turns: 7, then 5, then 3 tiles, and then 1 tile is left.
Rulebook page 3
Choose
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round one · Step
Discard the last tile
This does not apply with the current options.
Put the last tile face down in the middle of the scoreboard. Do not put it back in the box. Each city now has 6 tiles.
Rulebook page 3
Next
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round one · Decision
Did you play round one two times?
Only with 2 Players.
This does not apply with the current options.
With 2 players, play each round two times: round 1a, then round 1b. Each of your cities gets 3 tiles in each of the two rounds.
Rulebook page 7
Choose
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Phase
Round two
This does not apply with the current options.
Each player draws 3 duplex tiles, chooses 2, and puts 1 in each of their two cities. The round has only one turn.
Put the third tile under the city token on your left to show that you are ready. A duplex tile must fit in the square of 4 by 4 spaces.
Each city gets 2 duplex tiles, one from each partner. Then discard the leftover tiles.
Rulebook pages 3, 8
Next
Steps of this phase
- Draw 3 duplex tiles
- Choose 2 duplex tiles
- Reveal and place the duplex tiles
- Discard the leftover duplex tiles
- Did you play round two two times?
Rules for this step
Duplex tiles
A duplex tile is a rectangle with two buildings: two building tiles that stay together. Each half scores as a building of its type.
One half must touch a tile of the city. The tile points the same way as the other tiles, and the city must still be able to become a square of 4 by 4 spaces.
Each city gets 2 duplex tiles in round two.
Rulebook page 3 · Open this rule
Round two · Step
Draw 3 duplex tiles
This does not apply with the current options.
Draw 3 duplex tiles from the stacks. This is your hand.
Rulebook page 3
Next
Rules for this step
Duplex tiles
A duplex tile is a rectangle with two buildings: two building tiles that stay together. Each half scores as a building of its type.
One half must touch a tile of the city. The tile points the same way as the other tiles, and the city must still be able to become a square of 4 by 4 spaces.
Each city gets 2 duplex tiles in round two.
Rulebook page 3 · Open this rule
Round two · Step
Choose 2 duplex tiles
This does not apply with the current options.
Choose 2 of your duplex tiles in secret. Put the third tile above the city on your left, under its city token, to show that you are ready.
Rulebook pages 3, 8
Next
Rules for this step
Duplex tiles
A duplex tile is a rectangle with two buildings: two building tiles that stay together. Each half scores as a building of its type.
One half must touch a tile of the city. The tile points the same way as the other tiles, and the city must still be able to become a square of 4 by 4 spaces.
Each city gets 2 duplex tiles in round two.
Rulebook page 3 · Open this rule
Round two · Step
Reveal and place the duplex tiles
This does not apply with the current options.
Reveal your 2 duplex tiles at the same time as the other players. Talk with your partners, and put 1 tile in each of your two cities.
A duplex tile is two building tiles that stay together. One of its two halves must touch a tile of the city. Turn it so that it agrees with the other tiles, and so that the city can still be a square of 4 by 4 spaces.
Rulebook page 3
Next
Rules for this step
Duplex tiles
A duplex tile is a rectangle with two buildings: two building tiles that stay together. Each half scores as a building of its type.
One half must touch a tile of the city. The tile points the same way as the other tiles, and the city must still be able to become a square of 4 by 4 spaces.
Each city gets 2 duplex tiles in round two.
Rulebook page 3 · Open this rule
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Round two · Step
Discard the leftover duplex tiles
This does not apply with the current options.
Take the leftover duplex tiles from under each city token. Put them face down in the middle of the scoreboard. Each city now has 2 duplex tiles.
Rulebook page 3
Next
Rules for this step
Duplex tiles
A duplex tile is a rectangle with two buildings: two building tiles that stay together. Each half scores as a building of its type.
One half must touch a tile of the city. The tile points the same way as the other tiles, and the city must still be able to become a square of 4 by 4 spaces.
Each city gets 2 duplex tiles in round two.
Rulebook page 3 · Open this rule
Round two · Decision
Did you play round two two times?
Only with 2 Players.
This does not apply with the current options.
With 2 players, play round 2a and then round 2b. In each of them, draw 3 duplex tiles and place 2: one in each of your cities.
Rulebook page 7
Choose
Rules for this step
Duplex tiles
A duplex tile is a rectangle with two buildings: two building tiles that stay together. Each half scores as a building of its type.
One half must touch a tile of the city. The tile points the same way as the other tiles, and the city must still be able to become a square of 4 by 4 spaces.
Each city gets 2 duplex tiles in round two.
Rulebook page 3 · Open this rule
Phase
Round three
This does not apply with the current options.
Round three is the same as round one, but the hands go the other way: pass to the right, and take the stack on your left.
After 3 turns, discard the last tile. Each city is then a full square of 4 by 4 spaces: 12 building tiles and 2 duplex tiles.
Rulebook pages 3, 8
Next
Steps of this phase
- Draw 7 building tiles again
- Choose 2 tiles, pass right
- Reveal and place
- Is more than 1 tile under the token on your left?
- Discard the last tile again
- Did you play round three two times?
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round three · Step
Draw 7 building tiles again
This does not apply with the current options.
Draw 7 building tiles from the box. This is your hand.
Rulebook pages 3, 8
Next
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round three · Step
Choose 2 tiles, pass right
This does not apply with the current options.
Choose 2 tiles from your hand in secret. Put the other tiles face down above the city on your right, under its city token.
- 2 players: pass the other tiles to your opponent.
Rulebook pages 3, 7
Next
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round three · Step
Reveal and place
This does not apply with the current options.
When each city token has a stack under it, all players reveal their 2 tiles. Talk with your partners, and put 1 tile in each of your two cities, as in round one.
Rulebook page 3
Next
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round three · Decision
Is more than 1 tile under the token on your left?
This does not apply with the current options.
In round three, your neighbor on the left passes you the stack.
- More than 1 tile: take the stack, and choose again.
- Only 1 tile: discard it, and the round ends.
Rulebook pages 3, 8
Choose
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round three · Step
Discard the last tile again
This does not apply with the current options.
Put the last tile face down in the middle of the scoreboard.
Rulebook pages 3, 8
Next
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Round three · Decision
Did you play round three two times?
Only with 2 Players.
This does not apply with the current options.
With 2 players, play round 3a and then round 3b, each the same as round 1a.
Rulebook page 7
Choose
Rules for this step
Where a tile can go
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
Example of 4 by 4 tiles Shop Factory No tile No tile Park Tavern House No tile No tile Office No tile No tile No tile No tile No tile No tile - Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8 · Open this rule
Your partners
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3 · Open this rule
Step
Score each city
This does not apply with the current options.
Clear the discarded tiles from the scoreboard, and unfold it. Score the building types in the order of the reference card: shops, factories, taverns, offices, parks, and houses.
One player calls out a building type. Then each player in turn tells the points of that type for the city on their left, and moves the token of that city on the score track. Score one type in all cities before the next type.
Rulebook page 4
Next
Rules for this step
Shops
Shops score in sets. A set is a straight line of shops that touch, in a row or a column. Score each set separately.
- 1 shop: 2 points.
- 2 shops in a line: 5 points.
- 3 shops in a line: 10 points.
- 4 shops in a line: 16 points.
Where lines of shops cross (an L, a T, or a + shape), each shop counts in only one set.
Example: the column of 3 shops scores 10, the row of 2 shops scores 5, and the shop alone scores 2: 17 points in all.
Example of 4 by 4 tiles Shop Park Shop Shop Shop House Factory House Shop Factory Park House Factory House Shop Park - Shop
- Factory
- Park
- House
Rulebook pages 4, 8 · Open this rule
Factories
Compare the number of factories in all cities at the table.
- The city with the most factories (or each city tied for the most): 4 points for each factory.
- The city with the second most (or each city tied for it): 3 points for each factory.
- Each other city: 2 points for each factory.
Example: two cities have 4 factories each, and score 4 points for each factory (16 points). A city with 3 factories has the second most, and scores 3 for each (9 points). A city with 1 factory scores 2 points.
So, after a tie for the most, the next lower number is the second most.
Rulebook pages 4, 8 · Open this rule
Taverns
The four kinds of tavern each have a different symbol in a red diamond. Make sets of different taverns, anywhere in the city. Score each set separately.
- 1 kind: 1 point.
- 2 different kinds: 4 points.
- 3 different kinds: 9 points.
- All 4 kinds: 17 points.
A city can have the same kind of tavern more than one time. Each tavern counts in only one set.
Example: 2 drink taverns, 1 food tavern, 1 music tavern, and 1 bed tavern make a set of 4 (17 points) and a set of 1 (1 point): 18 points.
Rulebook pages 5, 8 · Open this rule
Offices
Count the offices of the city, anywhere in it.
- 1 office: 1 point. 2: 3 points. 3: 6 points. 4: 10 points. 5: 15 points. 6: 21 points.
A seventh office starts a new set that scores from 1 again. So 7 offices score 21 + 1 = 22 points.
Tavern bonus: each office that touches at least one tavern scores 1 more point. An office gets this point only one time, but one tavern can give it to many offices.
Example: a city has 8 offices, and 3 of them touch a tavern. The offices score 21 + 3 + 3 = 27 points.
Rulebook pages 5, 8 · Open this rule
Parks
Parks that share an edge make a group. A group does not have to be a straight line. Score each group separately.
- 1 park alone: 2 points.
- 2 parks: 8 points.
- 3 parks: 12 points.
- Each park more than 3: 1 point more (4 parks: 13, 5 parks: 14).
Example: a group of 2 parks and 1 park alone score 8 + 2 = 10 points.
Example of 2 by 4 tiles Park Park No tile No tile No tile No tile No tile Park - Park
Two groups of 2 parks score 16 points, but one group of 4 parks scores only 13.
Rulebook pages 5, 8 · Open this rule
Houses
Each house scores 1 point for each other building type in the city: shops, factories, taverns, offices, and parks. So a house scores at most 5 points. All taverns count as one type.
Factory next door: a house that touches a factory scores only 1 point.
Example: a city has houses, shops, factories, and parks. Each house scores 3 points, but a house next to a factory scores 1 point.
Rulebook pages 5, 8 · Open this rule
Step
Find your final score
This does not apply with the current options.
Your final score is the score of the lower of your two cities.
- 2 players: your final score is the sum of your two cities.
Rulebook pages 4, 7
Next
Rules for this step
Ties
First tiebreaker: the tied players compare their higher city. The higher score wins.
Second tiebreaker: each tied player counts the buildings of each type in both of their cities. Compare the shops first: the most shops wins. If that is a tie, compare the factories, then the taverns, the offices, the parks, and the houses.
Example: two players are still tied. One has 3 shops in their two cities, and the other has 2. The player with 3 shops wins.
2 players: use only the second tiebreaker.
Rulebook pages 4, 7, 8 · Open this rule
The 2-player variant
Each player builds two cities alone, one on the left and one on the right. The table has four cities.
In each turn, choose 2 tiles, and put 1 in each of your cities. Pass the rest of the hand to your opponent.
Play each round two times. So play rounds 1a and 1b (7 building tiles), 2a and 2b (3 duplex tiles, place 2), and 3a and 3b (7 building tiles).
Score each city as in the game for 3 to 7 players. Your final score is the sum of your two cities. For a tie, use only the second tiebreaker.
Without partners, this game can be more aggressive: you choose what your opponent gets when you pass tiles.
Rulebook page 7 · Open this rule
EndHow to win
The highest final score wins
This does not apply with the current options.
Each player builds two cities, one with each neighbor. Your final score is the score of your lower city. The player with the highest final score wins. So build both cities well.
End of the game: the game ends after round three. Then each city scores its building types.
Tie: the tied player with the higher score of their better city wins. If that is also a tie, see Ties.
2 players: each player builds two cities alone, and adds the scores of both cities.
Rulebook pages 1, 4, 7
The game is over. Select Start over for a new game.
Rules for this step
Ties
First tiebreaker: the tied players compare their higher city. The higher score wins.
Second tiebreaker: each tied player counts the buildings of each type in both of their cities. Compare the shops first: the most shops wins. If that is a tie, compare the factories, then the taverns, the offices, the parks, and the houses.
Example: two players are still tied. One has 3 shops in their two cities, and the other has 2. The player with 3 shops wins.
2 players: use only the second tiebreaker.
Rulebook pages 4, 7, 8 · Open this rule
Goal
Build two cities, one with the player on your left and one with the player on your right. At the end, each city scores for its buildings.
Your final score is the lower score of your two cities. Give the same care to both cities.
Rulebook page 1 · Open this rule
Rule
Goal
This does not apply with the current options.
Build two cities, one with the player on your left and one with the player on your right. At the end, each city scores for its buildings.
Your final score is the lower score of your two cities. Give the same care to both cities.
Rulebook page 1
Rule
Components
This does not apply with the current options.
- 108 building tiles (square).
- 24 duplex tiles (rectangular).
- 14 city tokens, in 7 pairs.
- 1 scoreboard.
- 7 reference cards.
- 15 seating randomizer cards.
Rulebook page 1
Rule
Where a tile can go
This does not apply with the current options.
- After the first tile, each tile must touch at least one tile of the city along an edge.
- All tiles of a city point the same way, so that both partners can read them.
- The finished city is a square of 4 by 4 spaces. Do not place a tile where the city could not become that square.
- A placed tile does not move again.
Example: a city of 6 tiles after round one. The next tile can go in any empty space of the square, next to a tile. A tile outside the square, or a tile turned on its side, is not allowed.
| Shop | Factory | No tile | No tile |
| Park | Tavern | House | No tile |
| No tile | Office | No tile | No tile |
| No tile | No tile | No tile | No tile |
- Shop
- Factory
- Tavern
- Office
- Park
- House
Rulebook pages 3, 8
Rule
Duplex tiles
This does not apply with the current options.
A duplex tile is a rectangle with two buildings: two building tiles that stay together. Each half scores as a building of its type.
One half must touch a tile of the city. The tile points the same way as the other tiles, and the city must still be able to become a square of 4 by 4 spaces.
Each city gets 2 duplex tiles in round two.
Rulebook page 3
Rule
Your partners
This does not apply with the current options.
The player on your left and the player on your right are your partners. You build one city with each of them.
Choose your tiles in secret. In the place step, talk openly with your partners about which tile goes in which city, and where.
Who places first: if both partners of a city wait for the other to place first, the player with the lower number on the seating randomizer card places first.
Rulebook pages 1, 3
Rule
Shops
This does not apply with the current options.
Shops score in sets. A set is a straight line of shops that touch, in a row or a column. Score each set separately.
- 1 shop: 2 points.
- 2 shops in a line: 5 points.
- 3 shops in a line: 10 points.
- 4 shops in a line: 16 points.
Where lines of shops cross (an L, a T, or a + shape), each shop counts in only one set.
Example: the column of 3 shops scores 10, the row of 2 shops scores 5, and the shop alone scores 2: 17 points in all.
| Shop | Park | Shop | Shop |
| Shop | House | Factory | House |
| Shop | Factory | Park | House |
| Factory | House | Shop | Park |
- Shop
- Factory
- Park
- House
Rulebook pages 4, 8
Rule
Factories
This does not apply with the current options.
Compare the number of factories in all cities at the table.
- The city with the most factories (or each city tied for the most): 4 points for each factory.
- The city with the second most (or each city tied for it): 3 points for each factory.
- Each other city: 2 points for each factory.
Example: two cities have 4 factories each, and score 4 points for each factory (16 points). A city with 3 factories has the second most, and scores 3 for each (9 points). A city with 1 factory scores 2 points.
So, after a tie for the most, the next lower number is the second most.
Rulebook pages 4, 8
Rule
Taverns
This does not apply with the current options.
The four kinds of tavern each have a different symbol in a red diamond. Make sets of different taverns, anywhere in the city. Score each set separately.
- 1 kind: 1 point.
- 2 different kinds: 4 points.
- 3 different kinds: 9 points.
- All 4 kinds: 17 points.
A city can have the same kind of tavern more than one time. Each tavern counts in only one set.
Example: 2 drink taverns, 1 food tavern, 1 music tavern, and 1 bed tavern make a set of 4 (17 points) and a set of 1 (1 point): 18 points.
Rulebook pages 5, 8
Rule
Offices
This does not apply with the current options.
Count the offices of the city, anywhere in it.
- 1 office: 1 point. 2: 3 points. 3: 6 points. 4: 10 points. 5: 15 points. 6: 21 points.
A seventh office starts a new set that scores from 1 again. So 7 offices score 21 + 1 = 22 points.
Tavern bonus: each office that touches at least one tavern scores 1 more point. An office gets this point only one time, but one tavern can give it to many offices.
Example: a city has 8 offices, and 3 of them touch a tavern. The offices score 21 + 3 + 3 = 27 points.
Rulebook pages 5, 8
Rule
Parks
This does not apply with the current options.
Parks that share an edge make a group. A group does not have to be a straight line. Score each group separately.
- 1 park alone: 2 points.
- 2 parks: 8 points.
- 3 parks: 12 points.
- Each park more than 3: 1 point more (4 parks: 13, 5 parks: 14).
Example: a group of 2 parks and 1 park alone score 8 + 2 = 10 points.
| Park | Park | No tile | No tile |
| No tile | No tile | No tile | Park |
- Park
Two groups of 2 parks score 16 points, but one group of 4 parks scores only 13.
Rulebook pages 5, 8
Rule
Houses
This does not apply with the current options.
Each house scores 1 point for each other building type in the city: shops, factories, taverns, offices, and parks. So a house scores at most 5 points. All taverns count as one type.
Factory next door: a house that touches a factory scores only 1 point.
Example: a city has houses, shops, factories, and parks. Each house scores 3 points, but a house next to a factory scores 1 point.
Rulebook pages 5, 8
Rule
Ties
This does not apply with the current options.
First tiebreaker: the tied players compare their higher city. The higher score wins.
Second tiebreaker: each tied player counts the buildings of each type in both of their cities. Compare the shops first: the most shops wins. If that is a tie, compare the factories, then the taverns, the offices, the parks, and the houses.
Example: two players are still tied. One has 3 shops in their two cities, and the other has 2. The player with 3 shops wins.
2 players: use only the second tiebreaker.
Rulebook pages 4, 7, 8
Rule
The 2-player variant
Only with 2 Players.
This does not apply with the current options.
Each player builds two cities alone, one on the left and one on the right. The table has four cities.
In each turn, choose 2 tiles, and put 1 in each of your cities. Pass the rest of the hand to your opponent.
Play each round two times. So play rounds 1a and 1b (7 building tiles), 2a and 2b (3 duplex tiles, place 2), and 3a and 3b (7 building tiles).
Score each city as in the game for 3 to 7 players. Your final score is the sum of your two cities. For a tie, use only the second tiebreaker.
Without partners, this game can be more aggressive: you choose what your opponent gets when you pass tiles.
Rulebook page 7
The steps in order
- Phase: Setup, then Choose the seats.
- Step: Choose the seats, then Mark each city.
- Step: Mark each city, then Shuffle the tiles.
- Step: Shuffle the tiles, then Round one.
- Phase: Round one, then Draw 7 building tiles.
- Step: Draw 7 building tiles, then Choose 2 tiles.
- Step: Choose 2 tiles, then Reveal your tiles.
- Step: Reveal your tiles, then Place 1 tile in each city.
- Step: Place 1 tile in each city, then Is more than 1 tile under the token on your right?.
- Decision: Is more than 1 tile under the token on your right?, then Yes: take them: Choose 2 tiles; or No: 1 tile: Discard the last tile.
- Step: Discard the last tile, then Round two; or Did you play round one two times?.
- Decision: Did you play round one two times?, then No: play round 1b: Draw 7 building tiles; or Yes: Round two.
- Phase: Round two, then Draw 3 duplex tiles.
- Step: Draw 3 duplex tiles, then Choose 2 duplex tiles.
- Step: Choose 2 duplex tiles, then Reveal and place the duplex tiles.
- Step: Reveal and place the duplex tiles, then Discard the leftover duplex tiles.
- Step: Discard the leftover duplex tiles, then Round three; or Did you play round two two times?.
- Decision: Did you play round two two times?, then No: play round 2b: Draw 3 duplex tiles; or Yes: Round three.
- Phase: Round three, then Draw 7 building tiles again.
- Step: Draw 7 building tiles again, then Choose 2 tiles, pass right.
- Step: Choose 2 tiles, pass right, then Reveal and place.
- Step: Reveal and place, then Is more than 1 tile under the token on your left?.
- Decision: Is more than 1 tile under the token on your left?, then Yes: take them: Choose 2 tiles, pass right; or No: 1 tile: Discard the last tile again.
- Step: Discard the last tile again, then Score each city; or Did you play round three two times?.
- Decision: Did you play round three two times?, then No: play round 3b: Draw 7 building tiles again; or Yes: Score each city.
- Step: Score each city, then Find your final score.
- Step: Find your final score, then The highest final score wins.
- End: The highest final score wins (how to win)
Reference rules
- Goal
- Components
- Where a tile can go
- Duplex tiles
- Your partners
- Shops
- Factories
- Taverns
- Offices
- Parks
- Houses
- Ties
- The 2-player variant