Phase
Setup
This does not apply with the current options.
Build a race course, give each player a robot with its mat and programming deck, and put the robots on the Docking Bay. Milk Run is the course for a first game.
Shuffle the damage deck and the upgrade deck, and deal 3 upgrades to each player. Each player starts with 3 Energy and the checkpoint token on START.
The youngest player places a robot first, and then the players to the left. Put the Archive token under the robot, and give the Priority token to the youngest player.
Rulebook page 3
Next
Steps of this phase
- Choose a race course
- Choose a robot
- Shuffle the damage and upgrade decks
- Block start spaces
- Put the robots on the Docking Bay
Rules for this step
Goal of the gameHow to win
Robo Rally is a race for 2 to 6 players. Program your robot with cards to move through a dangerous factory.
Reach the checkpoints of the course in their order. The first robot at the final checkpoint wins. There are no points. See Checkpoints.
End of the game: the race ends at once when a robot ends a register on the final checkpoint, with all earlier checkpoints reached. Its player wins. See What comes after this register? and The first robot at the final checkpoint wins.
No tie: the rulebook gives no tiebreak. Two robots cannot share a space, so only one robot can end a register on the final checkpoint.
Rulebook pages 1, 3, 8, 10, 15 · Open this rule
Components
6 robot figures, 6 player mats, 1 Docking Bay board, 4 factory boards (both sides), 120 programming cards (6 decks of 20), 40 damage cards, 40 upgrade cards, 6 plastic checkpoints, 6 Reboot tokens, 6 Archive tokens, 8 Energy cubes, 6 checkpoint tokens, 1 Priority token, 1 player aid, and 1 sticker sheet.
Rulebook pages 1, 2 · Open this rule
Cards win over the rulebook
When a Haywire card or an upgrade breaks a rule of the rulebook, the card wins.
Rulebook pages 18, 20 · Open this rule
Key terms
- Adjacent: a space next to your robot, to the left, right, front, or back, and not through a wall.
- Register card: a card in one of your registers.
- Target robot: the nearest robot in a straight line in the direction that your weapon fires. Weapons fire forward unless a card says otherwise.
- Unoccupied: a space with no robot. Board elements do not occupy a space.
Rulebook page 20 · Open this rule
Setup · Step
Choose a race course
This does not apply with the current options.
Choose one of the 13 race courses of the rulebook, or build your own. Milk Run is good for first-time players.
Set up the boards, the Docking Bay, the checkpoints, and the Reboot tokens exactly as the picture of the course shows. The direction of each board and Reboot arrow matters.
Before the first game, put the stickers on the plastic checkpoints.
Rulebook pages 3, 24
Next
Rules for this step
Race courses
The rulebook has 13 courses, from Starter to Advanced, each with its boards, its checkpoints, and a length: short (45 minutes or less), medium, or long (76 minutes or more).
Match the picture exactly: the board names, the checkpoint numbers, and the Reboot arrows. A course can have a special rule.
To design your own course: criss-cross the checkpoints, keep them away from corners and pits, put one Reboot token on each board, and choose a fair side of the Docking Bay.
Rulebook pages 24, 25, 26, 27, 28, 29, 30 · Open this rule
Checkpoints
Reach the checkpoints in their order. When your robot ends a register on the checkpoint that you need next, move your checkpoint token to that number.
Example: your token is on 2, so you reached checkpoints 1 and 2. Your robot ends a register on checkpoint 3: move the token to 3. If 3 is the last checkpoint, you win.
A checkpoint blocks no move or laser. Board lasers through it work, but other board elements under it do not. A shut-down robot cannot reach a checkpoint.
Rulebook pages 8, 15, 19 · Open this rule
Goal of the gameHow to win
Robo Rally is a race for 2 to 6 players. Program your robot with cards to move through a dangerous factory.
Reach the checkpoints of the course in their order. The first robot at the final checkpoint wins. There are no points. See Checkpoints.
End of the game: the race ends at once when a robot ends a register on the final checkpoint, with all earlier checkpoints reached. Its player wins. See What comes after this register? and The first robot at the final checkpoint wins.
No tie: the rulebook gives no tiebreak. Two robots cannot share a space, so only one robot can end a register on the final checkpoint.
Rulebook pages 1, 3, 8, 10, 15 · Open this rule
Components
6 robot figures, 6 player mats, 1 Docking Bay board, 4 factory boards (both sides), 120 programming cards (6 decks of 20), 40 damage cards, 40 upgrade cards, 6 plastic checkpoints, 6 Reboot tokens, 6 Archive tokens, 8 Energy cubes, 6 checkpoint tokens, 1 Priority token, 1 player aid, and 1 sticker sheet.
Rulebook pages 1, 2 · Open this rule
Cards win over the rulebook
When a Haywire card or an upgrade breaks a rule of the rulebook, the card wins.
Rulebook pages 18, 20 · Open this rule
Key terms
- Adjacent: a space next to your robot, to the left, right, front, or back, and not through a wall.
- Register card: a card in one of your registers.
- Target robot: the nearest robot in a straight line in the direction that your weapon fires. Weapons fire forward unless a card says otherwise.
- Unoccupied: a space with no robot. Board elements do not occupy a space.
Rulebook page 20 · Open this rule
Setup · Step
Choose a robot
This does not apply with the current options.
Each player takes a robot figure, its player mat, and its programming deck of 20 cards.
Shuffle your programming deck and put it face down on the Draw space of your mat. Put your checkpoint token on START.
Rulebook page 3
Next
Rules for this step
Programming cards
Each deck has 20 regular cards:
- Move 1 (4), Move 2 (3), Move 3 (1): move that many spaces forward.
- Rotate Right (4), Rotate Left (4): turn 90 degrees in place.
- U-Turn (1): turn 180 degrees in place.
- Move Back (1): move 1 space backward, and keep the facing.
- Power Up (1): gain 1 Energy.
- Again (1): repeat the card of the previous register. In Register 1, it acts as SPAM.
A robot faces the direction of the arrow on its base. Damage cards are programming cards too, but they are not in the starting deck.
Rulebook page 11 · Open this rule
Goal of the gameHow to win
Robo Rally is a race for 2 to 6 players. Program your robot with cards to move through a dangerous factory.
Reach the checkpoints of the course in their order. The first robot at the final checkpoint wins. There are no points. See Checkpoints.
End of the game: the race ends at once when a robot ends a register on the final checkpoint, with all earlier checkpoints reached. Its player wins. See What comes after this register? and The first robot at the final checkpoint wins.
No tie: the rulebook gives no tiebreak. Two robots cannot share a space, so only one robot can end a register on the final checkpoint.
Rulebook pages 1, 3, 8, 10, 15 · Open this rule
Components
6 robot figures, 6 player mats, 1 Docking Bay board, 4 factory boards (both sides), 120 programming cards (6 decks of 20), 40 damage cards, 40 upgrade cards, 6 plastic checkpoints, 6 Reboot tokens, 6 Archive tokens, 8 Energy cubes, 6 checkpoint tokens, 1 Priority token, 1 player aid, and 1 sticker sheet.
Rulebook pages 1, 2 · Open this rule
Cards win over the rulebook
When a Haywire card or an upgrade breaks a rule of the rulebook, the card wins.
Rulebook pages 18, 20 · Open this rule
Key terms
- Adjacent: a space next to your robot, to the left, right, front, or back, and not through a wall.
- Register card: a card in one of your registers.
- Target robot: the nearest robot in a straight line in the direction that your weapon fires. Weapons fire forward unless a card says otherwise.
- Unoccupied: a space with no robot. Board elements do not occupy a space.
Rulebook page 20 · Open this rule
Setup · Step
Shuffle the damage and upgrade decks
This does not apply with the current options.
Shuffle the 40 damage cards, and put them face down next to the boards.
Shuffle the 40 upgrade cards, and deal 3 to each player. Keep them face down next to your mat. You can look at them at any time.
Each player puts an Energy cube on the 3 of the Energy track. A robot can store 10 Energy.
With the lighter game, leave the upgrades and the Energy cubes in the box.
Rulebook pages 3, 32
Next
Rules for this step
Damage cards
A robot takes damage when it is shot or when it reboots. Draw damage cards from the damage deck, one at a time.
The deck has two kinds: SPAM and Haywire.
When the damage deck is empty, shuffle its discard pile. If that is empty too, take no damage in this register.
Rulebook page 17 · Open this rule
Upgrade cards
Upgrades give new abilities, weapons, defenses, or moves. A card shows its Energy cost and its effect.
- Permanent (yellow): the effect lasts for the rest of the game. At most 3 installed.
- Temporary (red): use it once and discard it. At most 3 next to your mat. A movement upgrade works just before or after your card activates. The others work at any time.
To install a fourth of one type, discard an installed one of that type. When the upgrade deck is empty, shuffle its discard pile.
An upgrade that names a "card" means that card of your starting deck. An upgrade that names a maneuver works with any source of it.
Rulebook pages 4, 5, 20, 21, 23 · Open this rule
Energy
Each robot starts with 3 Energy, and stores at most 10. Energy that would go over 10 is lost.
Gain Energy at a battery at the end of a register, or with a Power Up card. Spend it on upgrades.
Rulebook pages 3, 8, 11 · Open this rule
A lighter game
For beginners and young players: play with no upgrades. Remove the Upgrade Phase, the upgrade cards, and the Energy track. The batteries do nothing.
Rulebook page 32 · Open this rule
Goal of the gameHow to win
Robo Rally is a race for 2 to 6 players. Program your robot with cards to move through a dangerous factory.
Reach the checkpoints of the course in their order. The first robot at the final checkpoint wins. There are no points. See Checkpoints.
End of the game: the race ends at once when a robot ends a register on the final checkpoint, with all earlier checkpoints reached. Its player wins. See What comes after this register? and The first robot at the final checkpoint wins.
No tie: the rulebook gives no tiebreak. Two robots cannot share a space, so only one robot can end a register on the final checkpoint.
Rulebook pages 1, 3, 8, 10, 15 · Open this rule
Components
6 robot figures, 6 player mats, 1 Docking Bay board, 4 factory boards (both sides), 120 programming cards (6 decks of 20), 40 damage cards, 40 upgrade cards, 6 plastic checkpoints, 6 Reboot tokens, 6 Archive tokens, 8 Energy cubes, 6 checkpoint tokens, 1 Priority token, 1 player aid, and 1 sticker sheet.
Rulebook pages 1, 2 · Open this rule
Cards win over the rulebook
When a Haywire card or an upgrade breaks a rule of the rulebook, the card wins.
Rulebook pages 18, 20 · Open this rule
Key terms
- Adjacent: a space next to your robot, to the left, right, front, or back, and not through a wall.
- Register card: a card in one of your registers.
- Target robot: the nearest robot in a straight line in the direction that your weapon fires. Weapons fire forward unless a card says otherwise.
- Unoccupied: a space with no robot. Board elements do not occupy a space.
Rulebook page 20 · Open this rule
Setup · Step
Block start spaces
Only with Competitive mode.
This does not apply with the current options.
Competitive mode: after the first priority player is known, each player in priority order puts their Energy cube on one start space of the Docking Bay. Do not use the cubes of the course picture.
Robots can start only on the start spaces with no cube. When all robots are placed, put the cubes back on the 3 of the Energy tracks.
Rulebook page 32
Next
Rules for this step
Competitive mode
For experienced players: each player in priority order puts their Energy cube on a start space of the Docking Bay. Robots start only on the other start spaces. Then the cubes go back to 3.
Rulebook page 32 · Open this rule
Goal of the gameHow to win
Robo Rally is a race for 2 to 6 players. Program your robot with cards to move through a dangerous factory.
Reach the checkpoints of the course in their order. The first robot at the final checkpoint wins. There are no points. See Checkpoints.
End of the game: the race ends at once when a robot ends a register on the final checkpoint, with all earlier checkpoints reached. Its player wins. See What comes after this register? and The first robot at the final checkpoint wins.
No tie: the rulebook gives no tiebreak. Two robots cannot share a space, so only one robot can end a register on the final checkpoint.
Rulebook pages 1, 3, 8, 10, 15 · Open this rule
Components
6 robot figures, 6 player mats, 1 Docking Bay board, 4 factory boards (both sides), 120 programming cards (6 decks of 20), 40 damage cards, 40 upgrade cards, 6 plastic checkpoints, 6 Reboot tokens, 6 Archive tokens, 8 Energy cubes, 6 checkpoint tokens, 1 Priority token, 1 player aid, and 1 sticker sheet.
Rulebook pages 1, 2 · Open this rule
Cards win over the rulebook
When a Haywire card or an upgrade breaks a rule of the rulebook, the card wins.
Rulebook pages 18, 20 · Open this rule
Key terms
- Adjacent: a space next to your robot, to the left, right, front, or back, and not through a wall.
- Register card: a card in one of your registers.
- Target robot: the nearest robot in a straight line in the direction that your weapon fires. Weapons fire forward unless a card says otherwise.
- Unoccupied: a space with no robot. Board elements do not occupy a space.
Rulebook page 20 · Open this rule
Setup · Step
Put the robots on the Docking Bay
This does not apply with the current options.
The youngest player puts their robot first on a black and white start gear of the Docking Bay, and then the players to the left. The arrow of each robot points to the board next to it.
Do not start on the spaces that the course picture covers with Energy cubes. Remove those cubes when all robots are placed.
Put your Archive token under your robot, with its arrow to the board next to it. Give the Priority token to the youngest player.
Rulebook pages 3, 24
Next
Rules for this step
Priority token
The player with the Priority token resolves each register first. Then the players to the left resolve theirs.
At the end of each round, the Priority token passes to the left. The youngest player has it in the first round.
Rulebook pages 3, 4, 7, 10 · Open this rule
Rebooting
A robot that falls into a pit or off the board reboots at once:
- Take the robot off the board and put it on your mat.
- Its program ends for this round. Discard the cards of the other registers and of your hand. SPAM in your registers goes to your discard pile, and Haywire to the damage discard pile.
- Draw 2 damage cards. SPAM goes to your discard pile. A Haywire goes face down in the register of the fall; a second one is discarded.
Upgrades stay, also the uninstalled ones. Each board has 1 Reboot token. A robot that falls off the Docking Bay reboots on its Archive token.
Rulebook pages 15, 19 · Open this rule
Goal of the gameHow to win
Robo Rally is a race for 2 to 6 players. Program your robot with cards to move through a dangerous factory.
Reach the checkpoints of the course in their order. The first robot at the final checkpoint wins. There are no points. See Checkpoints.
End of the game: the race ends at once when a robot ends a register on the final checkpoint, with all earlier checkpoints reached. Its player wins. See What comes after this register? and The first robot at the final checkpoint wins.
No tie: the rulebook gives no tiebreak. Two robots cannot share a space, so only one robot can end a register on the final checkpoint.
Rulebook pages 1, 3, 8, 10, 15 · Open this rule
Components
6 robot figures, 6 player mats, 1 Docking Bay board, 4 factory boards (both sides), 120 programming cards (6 decks of 20), 40 damage cards, 40 upgrade cards, 6 plastic checkpoints, 6 Reboot tokens, 6 Archive tokens, 8 Energy cubes, 6 checkpoint tokens, 1 Priority token, 1 player aid, and 1 sticker sheet.
Rulebook pages 1, 2 · Open this rule
Cards win over the rulebook
When a Haywire card or an upgrade breaks a rule of the rulebook, the card wins.
Rulebook pages 18, 20 · Open this rule
Key terms
- Adjacent: a space next to your robot, to the left, right, front, or back, and not through a wall.
- Register card: a card in one of your registers.
- Target robot: the nearest robot in a straight line in the direction that your weapon fires. Weapons fire forward unless a card says otherwise.
- Unoccupied: a space with no robot. Board elements do not occupy a space.
Rulebook page 20 · Open this rule
Phase
Upgrade Phase
Only with no A lighter game.
This does not apply with the current options.
A round has three phases: upgrade, program, and activate. In the Upgrade Phase, all players at the same time can spend Energy on upgrades.
You can draw 1 new upgrade for 1 Energy, install 1 upgrade for its cost, and uninstall any upgrades.
A robot holds at most 3 permanent and 3 temporary upgrades.
Rulebook pages 4, 5
Next
Steps of this phase
Rules for this step
Upgrade cards
Upgrades give new abilities, weapons, defenses, or moves. A card shows its Energy cost and its effect.
- Permanent (yellow): the effect lasts for the rest of the game. At most 3 installed.
- Temporary (red): use it once and discard it. At most 3 next to your mat. A movement upgrade works just before or after your card activates. The others work at any time.
To install a fourth of one type, discard an installed one of that type. When the upgrade deck is empty, shuffle its discard pile.
An upgrade that names a "card" means that card of your starting deck. An upgrade that names a maneuver works with any source of it.
Rulebook pages 4, 5, 20, 21, 23 · Open this rule
Energy
Each robot starts with 3 Energy, and stores at most 10. Energy that would go over 10 is lost.
Gain Energy at a battery at the end of a register, or with a Power Up card. Spend it on upgrades.
Rulebook pages 3, 8, 11 · Open this rule
Upgrade Phase · Step
Draw, install, or uninstall upgrades
Only with no A lighter game.
This does not apply with the current options.
All players do this at the same time, in any order. Each action is optional:
- Draw a new upgrade: pay 1 Energy and draw 1 upgrade card. Only one draw in each Upgrade Phase. You can keep any number of uninstalled upgrades.
- Install 1 upgrade: pay its Energy cost from the top left corner. Only one install in each Upgrade Phase, also in the first round.
- Uninstall upgrades: discard any number of installed upgrades.
A permanent upgrade goes face up in the Installed Upgrades area of your mat. A temporary upgrade goes face up next to your mat.
Rulebook pages 4, 5
Next
Rules for this step
Upgrade cards
Upgrades give new abilities, weapons, defenses, or moves. A card shows its Energy cost and its effect.
- Permanent (yellow): the effect lasts for the rest of the game. At most 3 installed.
- Temporary (red): use it once and discard it. At most 3 next to your mat. A movement upgrade works just before or after your card activates. The others work at any time.
To install a fourth of one type, discard an installed one of that type. When the upgrade deck is empty, shuffle its discard pile.
An upgrade that names a "card" means that card of your starting deck. An upgrade that names a maneuver works with any source of it.
Rulebook pages 4, 5, 20, 21, 23 · Open this rule
Energy
Each robot starts with 3 Energy, and stores at most 10. Energy that would go over 10 is lost.
Gain Energy at a battery at the end of a register, or with a Power Up card. Spend it on upgrades.
Rulebook pages 3, 8, 11 · Open this rule
Phase
Programming Phase
This does not apply with the current options.
All players program their robots at the same time: draw up to 9 cards, and put one card face down in each of the 5 registers in the order of the moves.
If your deck runs out, shuffle your discard pile as a new deck. A face-down Haywire in a register stays there: program around it.
Discard the other cards of your hand, but keep the damage cards in your hand.
Rulebook pages 5, 6, 18
Next
Steps of this phase
- Draw up to 9 cards
- Start the programming timer
- Program the 5 registers
- Discard the SPAM in your hand
- Does a robot shut down?
- Shut down the robot
Rules for this step
Programming cards
Each deck has 20 regular cards:
- Move 1 (4), Move 2 (3), Move 3 (1): move that many spaces forward.
- Rotate Right (4), Rotate Left (4): turn 90 degrees in place.
- U-Turn (1): turn 180 degrees in place.
- Move Back (1): move 1 space backward, and keep the facing.
- Power Up (1): gain 1 Energy.
- Again (1): repeat the card of the previous register. In Register 1, it acts as SPAM.
A robot faces the direction of the arrow on its base. Damage cards are programming cards too, but they are not in the starting deck.
Rulebook page 11 · Open this rule
Registers
Each player mat has 5 registers. Each round, you put one programming card face down in each one. The cards resolve from Register 1 to Register 5.
A register card is any card in a register: a damage card or a regular programming card. Each register holds at most 1 face-down Haywire.
Rulebook pages 5, 18, 20 · Open this rule
Programming Phase · Step
Draw up to 9 cards
This does not apply with the current options.
Draw cards from your programming deck until you have 9 cards in your hand. If the deck runs out, shuffle your discard pile to make a new deck, and draw on.
Damage cards in your hand from earlier rounds count toward the 9.
Rulebook pages 5, 17
Next
Rules for this step
Programming cards
Each deck has 20 regular cards:
- Move 1 (4), Move 2 (3), Move 3 (1): move that many spaces forward.
- Rotate Right (4), Rotate Left (4): turn 90 degrees in place.
- U-Turn (1): turn 180 degrees in place.
- Move Back (1): move 1 space backward, and keep the facing.
- Power Up (1): gain 1 Energy.
- Again (1): repeat the card of the previous register. In Register 1, it acts as SPAM.
A robot faces the direction of the arrow on its base. Damage cards are programming cards too, but they are not in the starting deck.
Rulebook page 11 · Open this rule
SPAM
A SPAM card goes on your own discard pile. It comes into your hand later, and it stays in your hand from round to round.
To get rid of SPAM, program it, or shut down. When a SPAM card is revealed in a register, put it on the damage discard pile. Put the top card of your deck face up in that register, and resolve it. Another SPAM repeats this.
Rulebook page 17 · Open this rule
Registers
Each player mat has 5 registers. Each round, you put one programming card face down in each one. The cards resolve from Register 1 to Register 5.
A register card is any card in a register: a damage card or a regular programming card. Each register holds at most 1 face-down Haywire.
Rulebook pages 5, 18, 20 · Open this rule
Programming Phase · Step
Start the programming timer
Only with Act fast mode.
This does not apply with the current options.
Act fast mode: when all hands have 9 cards, one player starts a timer of 2 or 3 minutes.
A player with empty registers when the time runs out shuffles their hand and fills the empty registers at random.
Rulebook page 32
Next
Rules for this step
Act fast mode
For experienced players: after all hands have 9 cards, a timer of 2 or 3 minutes starts. Empty registers at the end get random cards from your hand.
Rulebook page 32 · Open this rule
Programming cards
Each deck has 20 regular cards:
- Move 1 (4), Move 2 (3), Move 3 (1): move that many spaces forward.
- Rotate Right (4), Rotate Left (4): turn 90 degrees in place.
- U-Turn (1): turn 180 degrees in place.
- Move Back (1): move 1 space backward, and keep the facing.
- Power Up (1): gain 1 Energy.
- Again (1): repeat the card of the previous register. In Register 1, it acts as SPAM.
A robot faces the direction of the arrow on its base. Damage cards are programming cards too, but they are not in the starting deck.
Rulebook page 11 · Open this rule
Registers
Each player mat has 5 registers. Each round, you put one programming card face down in each one. The cards resolve from Register 1 to Register 5.
A register card is any card in a register: a damage card or a regular programming card. Each register holds at most 1 face-down Haywire.
Rulebook pages 5, 18, 20 · Open this rule
Programming Phase · Step
Program the 5 registers
This does not apply with the current options.
Look at the board around your robot, and plan its moves to the next checkpoint. Mind the board elements and the other robots.
Put 1 card face down in each of the 5 registers of your mat. Register 1 activates first. A register with a face-down Haywire takes no other card.
Put the regular cards that are still in your hand on your discard pile. Damage cards stay in your hand until you program them or shut down.
Program fast. Once the priority player reveals Register 1, nobody can change a program.
Rulebook pages 5, 6, 7, 18
Next
Rules for this step
Registers
Each player mat has 5 registers. Each round, you put one programming card face down in each one. The cards resolve from Register 1 to Register 5.
A register card is any card in a register: a damage card or a regular programming card. Each register holds at most 1 face-down Haywire.
Rulebook pages 5, 18, 20 · Open this rule
Haywire
A Haywire card goes face down, unseen, under the card of the current register. Next round it gives a wild effect in that register.
Each register holds 1 face-down Haywire. A second one in the same register goes face up to the damage discard pile: no damage.
You can look at your Haywires, but they stay in their registers. At the end of the round, discard only face-up cards. A revealed Haywire goes to the damage discard pile.
Rulebook pages 18, 19 · Open this rule
Programming cards
Each deck has 20 regular cards:
- Move 1 (4), Move 2 (3), Move 3 (1): move that many spaces forward.
- Rotate Right (4), Rotate Left (4): turn 90 degrees in place.
- U-Turn (1): turn 180 degrees in place.
- Move Back (1): move 1 space backward, and keep the facing.
- Power Up (1): gain 1 Energy.
- Again (1): repeat the card of the previous register. In Register 1, it acts as SPAM.
A robot faces the direction of the arrow on its base. Damage cards are programming cards too, but they are not in the starting deck.
Rulebook page 11 · Open this rule
Programming Phase · Step
Discard the SPAM in your hand
Only with A less SPAM-y game.
This does not apply with the current options.
A less SPAM-y game: at the end of the Programming Phase, put all SPAM cards of your hand on your own discard pile.
You still draw SPAM from your deck, but you draw your other cards more often.
Rulebook page 32
Next
Rules for this step
A less SPAM-y game
At the end of the Programming Phase, discard all SPAM of your hand to your own discard pile. You draw your other cards more often.
Rulebook page 32 · Open this rule
Programming cards
Each deck has 20 regular cards:
- Move 1 (4), Move 2 (3), Move 3 (1): move that many spaces forward.
- Rotate Right (4), Rotate Left (4): turn 90 degrees in place.
- U-Turn (1): turn 180 degrees in place.
- Move Back (1): move 1 space backward, and keep the facing.
- Power Up (1): gain 1 Energy.
- Again (1): repeat the card of the previous register. In Register 1, it acts as SPAM.
A robot faces the direction of the arrow on its base. Damage cards are programming cards too, but they are not in the starting deck.
Rulebook page 11 · Open this rule
Registers
Each player mat has 5 registers. Each round, you put one programming card face down in each one. The cards resolve from Register 1 to Register 5.
A register card is any card in a register: a damage card or a regular programming card. Each register holds at most 1 face-down Haywire.
Rulebook pages 5, 18, 20 · Open this rule
Programming Phase · Decision
Does a robot shut down?
This does not apply with the current options.
After all players have programmed, and before Register 1 is revealed, a player with a lot of damage can say "I am shutting down!"
A shut-down robot does not move this round, but it gets rid of all its damage cards.
Rulebook page 19
Choose
Rules for this step
Shutdown
A player with much SPAM can shut down after all players programmed, before Register 1 is revealed.
Reveal your registers. All damage cards of your registers, hand, and discard pile go to the damage discard pile. Your regular cards go to your discard pile.
The robot does nothing this round but stays on the board, open to belts, pushes, and lasers. Hint: shut down on a belt toward your next checkpoint.
Rulebook page 19 · Open this rule
Programming cards
Each deck has 20 regular cards:
- Move 1 (4), Move 2 (3), Move 3 (1): move that many spaces forward.
- Rotate Right (4), Rotate Left (4): turn 90 degrees in place.
- U-Turn (1): turn 180 degrees in place.
- Move Back (1): move 1 space backward, and keep the facing.
- Power Up (1): gain 1 Energy.
- Again (1): repeat the card of the previous register. In Register 1, it acts as SPAM.
A robot faces the direction of the arrow on its base. Damage cards are programming cards too, but they are not in the starting deck.
Rulebook page 11 · Open this rule
Registers
Each player mat has 5 registers. Each round, you put one programming card face down in each one. The cards resolve from Register 1 to Register 5.
A register card is any card in a register: a damage card or a regular programming card. Each register holds at most 1 face-down Haywire.
Rulebook pages 5, 18, 20 · Open this rule
Programming Phase · Step
Shut down the robot
This does not apply with the current options.
The robot shuts down for this round. Reveal all cards in your registers.
Put all damage cards of your registers, your hand, and your discard pile on the damage discard pile. Put all regular cards of your registers and your hand on your discard pile.
The robot stays on the board. Board elements, pushes, and lasers still affect it, but it cannot collect Energy or reach a checkpoint. It plays as usual next round.
Rulebook page 19
Next
Rules for this step
Shutdown
A player with much SPAM can shut down after all players programmed, before Register 1 is revealed.
Reveal your registers. All damage cards of your registers, hand, and discard pile go to the damage discard pile. Your regular cards go to your discard pile.
The robot does nothing this round but stays on the board, open to belts, pushes, and lasers. Hint: shut down on a belt toward your next checkpoint.
Rulebook page 19 · Open this rule
Programming cards
Each deck has 20 regular cards:
- Move 1 (4), Move 2 (3), Move 3 (1): move that many spaces forward.
- Rotate Right (4), Rotate Left (4): turn 90 degrees in place.
- U-Turn (1): turn 180 degrees in place.
- Move Back (1): move 1 space backward, and keep the facing.
- Power Up (1): gain 1 Energy.
- Again (1): repeat the card of the previous register. In Register 1, it acts as SPAM.
A robot faces the direction of the arrow on its base. Damage cards are programming cards too, but they are not in the starting deck.
Rulebook page 11 · Open this rule
Registers
Each player mat has 5 registers. Each round, you put one programming card face down in each one. The cards resolve from Register 1 to Register 5.
A register card is any card in a register: a damage card or a regular programming card. Each register holds at most 1 face-down Haywire.
Rulebook pages 5, 18, 20 · Open this rule
Phase
Activation Phase
This does not apply with the current options.
Resolve the 5 registers in order. In each register, all robots move in priority order, then the board elements and the robot lasers activate, then the end-of-register effects.
Board elements activate in order: blue conveyor belts, green conveyor belts, push panels, gears, and board lasers. Then each robot fires its main laser.
At the end of a register, a robot on a battery gains 1 Energy, and a robot on its next checkpoint advances its checkpoint token.
Rulebook pages 7, 8
Next
Steps of this phase
- A: reveal and resolve the register
- B: activate the board elements
- B6: fire the robot lasers
- C: batteries and checkpoints
- What comes after this register?
- End the round
- Shuffle all your programming cards
Rules for this step
Priority token
The player with the Priority token resolves each register first. Then the players to the left resolve theirs.
At the end of each round, the Priority token passes to the left. The youngest player has it in the first round.
Rulebook pages 3, 4, 7, 10 · Open this rule
Order of the board elements
In each register, after the programming cards:
- 1: blue conveyor belts. 2: green conveyor belts. 3: push panels. 4: gears. 5: board lasers.
- 6: robot weapons.
- 7: batteries. 8: checkpoints.
One element can move a robot onto another element that comes later in the order: it activates too.
Rulebook pages 2, 7, 8 · Open this rule
Activation Phase · Step
A: reveal and resolve the register
This does not apply with the current options.
All players flip the card in the current register.
The player with the Priority token resolves their card first, then the players to the left. A robot that moves into another robot pushes it.
A revealed SPAM card goes to the damage discard pile, and the top card of your deck replaces it. A rebooted robot comes back in Register 1 of the next round.
Ignore the effects of the spaces until the board elements activate.
Rulebook pages 7, 17, 20
Next
Rules for this step
Programming cards
Each deck has 20 regular cards:
- Move 1 (4), Move 2 (3), Move 3 (1): move that many spaces forward.
- Rotate Right (4), Rotate Left (4): turn 90 degrees in place.
- U-Turn (1): turn 180 degrees in place.
- Move Back (1): move 1 space backward, and keep the facing.
- Power Up (1): gain 1 Energy.
- Again (1): repeat the card of the previous register. In Register 1, it acts as SPAM.
A robot faces the direction of the arrow on its base. Damage cards are programming cards too, but they are not in the starting deck.
Rulebook page 11 · Open this rule
Pushing robots
A robot that moves into the space of another robot pushes it in the direction of the move, to the end of the move. A line of robots all gets pushed. Pushed robots keep their facing.
One move is one push, however far: a Move 3 pushes one time, for 3 spaces. A robot pushed into a wall stops, and so does the pusher. The rest of the move is lost.
Robots can be pushed into pits and off the board. A push does no damage. Belts never push.
Rulebook page 16 · Open this rule
Walls
Robots cannot move or fire through walls. Other board elements do not block.
Example: with a wall 1 space ahead, a Move 2 moves 1 space and stops. The rest of the move is lost.
A robot on the other side of a wall is not adjacent.
Rulebook page 15 · Open this rule
Pits and board edges
A robot that moves into a pit or off the edge of a board, in any way, must reboot.
The edge is not a pit, even if the result is similar: an upgrade against pits does not help at an edge.
The black borders of the boards are not walls. Two spaces on both sides of a border are adjacent.
Rulebook pages 15, 16 · Open this rule
A less deadly game
Play without the rule of falling off the edge. Each board edge with no board next to it is an invisible wall. A robot that would move off the board hits the wall.
Rulebook page 32 · Open this rule
Rebooting
A robot that falls into a pit or off the board reboots at once:
- Take the robot off the board and put it on your mat.
- Its program ends for this round. Discard the cards of the other registers and of your hand. SPAM in your registers goes to your discard pile, and Haywire to the damage discard pile.
- Draw 2 damage cards. SPAM goes to your discard pile. A Haywire goes face down in the register of the fall; a second one is discarded.
Upgrades stay, also the uninstalled ones. Each board has 1 Reboot token. A robot that falls off the Docking Bay reboots on its Archive token.
Rulebook pages 15, 19 · Open this rule
SPAM
A SPAM card goes on your own discard pile. It comes into your hand later, and it stays in your hand from round to round.
To get rid of SPAM, program it, or shut down. When a SPAM card is revealed in a register, put it on the damage discard pile. Put the top card of your deck face up in that register, and resolve it. Another SPAM repeats this.
Rulebook page 17 · Open this rule
Haywire
A Haywire card goes face down, unseen, under the card of the current register. Next round it gives a wild effect in that register.
Each register holds 1 face-down Haywire. A second one in the same register goes face up to the damage discard pile: no damage.
You can look at your Haywires, but they stay in their registers. At the end of the round, discard only face-up cards. A revealed Haywire goes to the damage discard pile.
Rulebook pages 18, 19 · Open this rule
Back on the board after a reboot
Program the next round as usual, without the robot on the board. In Register 1, at your priority, put the robot on the Reboot token of the board where it fell. Choose its facing, and resolve Register 1.
If a robot is on that space, move it 1 space in the direction of the arrow of the token first. This is not a push.
Rulebook page 20 · Open this rule
Priority token
The player with the Priority token resolves each register first. Then the players to the left resolve theirs.
At the end of each round, the Priority token passes to the left. The youngest player has it in the first round.
Rulebook pages 3, 4, 7, 10 · Open this rule
Order of the board elements
In each register, after the programming cards:
- 1: blue conveyor belts. 2: green conveyor belts. 3: push panels. 4: gears. 5: board lasers.
- 6: robot weapons.
- 7: batteries. 8: checkpoints.
One element can move a robot onto another element that comes later in the order: it activates too.
Rulebook pages 2, 7, 8 · Open this rule
Activation Phase · Step
B: activate the board elements
This does not apply with the current options.
Each kind of board element activates for all robots at the same time, in this order:
- 1: blue conveyor belts convey 1 space, and a robot still on a blue belt conveys 1 more.
- 2: green conveyor belts convey 1 space.
- 3: push panels push 1 space, only in the registers printed on them.
- 4: gears rotate 90 degrees.
- 5: board lasers hit the nearest robot.
An element affects a robot only when the robot is on it at its step. A robot that moved through a laser earlier is not hit.
Rulebook pages 7, 8
Next
Rules for this step
Order of the board elements
In each register, after the programming cards:
- 1: blue conveyor belts. 2: green conveyor belts. 3: push panels. 4: gears. 5: board lasers.
- 6: robot weapons.
- 7: batteries. 8: checkpoints.
One element can move a robot onto another element that comes later in the order: it activates too.
Rulebook pages 2, 7, 8 · Open this rule
Conveyor belts: blocks and curves
A belt that would convey a robot onto a space with another robot stops it on the last space of the belt. A belt never pushes. A robot does not convey off a belt when a robot or a wall is in the way.
Two robots that would convey into the same junction space both stay out of it.
A belt that conveys a robot onto a curved arrow turns the robot 90 degrees in that direction. A robot that arrives in another way does not turn. At a junction, it turns only when it comes from the side of the curved arrow.
Rulebook pages 12, 13, 16 · Open this rule
Blue conveyor belts
A blue belt (two arrows on each space) conveys a robot 1 space in the direction of the arrow. If the robot is still on a blue belt, it conveys 1 more space.
A robot that conveys off the belt does not convey a second time. A blue belt can convey a robot onto a green belt, which then conveys it too.
All robots on belts of one colour convey at the same time.
Rulebook pages 8, 12, 14 · Open this rule
Green conveyor belts
A green belt conveys a robot 1 space in the direction of the arrow.
A green belt that conveys a robot onto a blue belt gives no blue move: the blue belts already activated.
Rulebook pages 8, 14 · Open this rule
Push panels
A push panel pushes each robot on its space 1 space away from its wall. A line of robots all gets pushed.
It works only in the registers printed on it, for example 2 and 4. Push panels push after the belts, and before the gears.
Rulebook pages 8, 14 · Open this rule
Gears
A gear turns the robot on it 90 degrees in the direction of its arrows. Red gears turn left, and green gears turn right. Gears turn after the push panels.
Rulebook pages 8, 14 · Open this rule
Board lasers
A board laser fires from its red and white pointer on a wall. It hits only the nearest robot, and cannot fire through walls.
The robot draws 1 damage card for each beam: a double laser deals 2, one at a time.
Rulebook pages 8, 14 · Open this rule
Priority token
The player with the Priority token resolves each register first. Then the players to the left resolve theirs.
At the end of each round, the Priority token passes to the left. The youngest player has it in the first round.
Rulebook pages 3, 4, 7, 10 · Open this rule
Activation Phase · Step
B6: fire the robot lasers
This does not apply with the current options.
Each robot fires its main laser forward, in the direction of the arrow on its base. It hits the nearest robot in line, unless a wall is in the way. The target draws 1 damage card.
An upgrade that fires "instead of the main laser" replaces it. Only one such weapon per register. When the order matters, weapons fire in priority order.
Rulebook pages 8, 16, 20
Next
Rules for this step
Robot lasers
Each robot has a main laser that fires forward with no limit of range. It hits the nearest robot in line, unless a wall blocks it. The target draws 1 damage card.
Some upgrades fire in place of the main laser, and some fire with it.
Rulebook pages 8, 16, 20 · Open this rule
Damage cards
A robot takes damage when it is shot or when it reboots. Draw damage cards from the damage deck, one at a time.
The deck has two kinds: SPAM and Haywire.
When the damage deck is empty, shuffle its discard pile. If that is empty too, take no damage in this register.
Rulebook page 17 · Open this rule
Priority token
The player with the Priority token resolves each register first. Then the players to the left resolve theirs.
At the end of each round, the Priority token passes to the left. The youngest player has it in the first round.
Rulebook pages 3, 4, 7, 10 · Open this rule
Order of the board elements
In each register, after the programming cards:
- 1: blue conveyor belts. 2: green conveyor belts. 3: push panels. 4: gears. 5: board lasers.
- 6: robot weapons.
- 7: batteries. 8: checkpoints.
One element can move a robot onto another element that comes later in the order: it activates too.
Rulebook pages 2, 7, 8 · Open this rule
Activation Phase · Step
C: batteries and checkpoints
This does not apply with the current options.
In this order:
- A robot on a battery space gains 1 Energy, up to 10.
- A robot on the checkpoint that it needs next moves its checkpoint token one space to the right.
Rulebook pages 8, 14, 15
Next
Rules for this step
Batteries
A robot that ends a register on a battery space gains 1 Energy, up to 10.
A shut-down robot gains no Energy. In the lighter game, batteries do nothing.
Rulebook pages 8, 14, 19, 32 · Open this rule
Checkpoints
Reach the checkpoints in their order. When your robot ends a register on the checkpoint that you need next, move your checkpoint token to that number.
Example: your token is on 2, so you reached checkpoints 1 and 2. Your robot ends a register on checkpoint 3: move the token to 3. If 3 is the last checkpoint, you win.
A checkpoint blocks no move or laser. Board lasers through it work, but other board elements under it do not. A shut-down robot cannot reach a checkpoint.
Rulebook pages 8, 15, 19 · Open this rule
Dynamic archiving
Use no Reboot tokens. When your robot ends a register on a checkpoint or a battery, put your Archive token there. A robot reboots at its Archive space.
If a robot occupies it, use the reboot rules: the arrow of the Archive token acts as the arrow of a Reboot token. The token does not change the board element under it.
Rulebook page 32 · Open this rule
Priority token
The player with the Priority token resolves each register first. Then the players to the left resolve theirs.
At the end of each round, the Priority token passes to the left. The youngest player has it in the first round.
Rulebook pages 3, 4, 7, 10 · Open this rule
Order of the board elements
In each register, after the programming cards:
- 1: blue conveyor belts. 2: green conveyor belts. 3: push panels. 4: gears. 5: board lasers.
- 6: robot weapons.
- 7: batteries. 8: checkpoints.
One element can move a robot onto another element that comes later in the order: it activates too.
Rulebook pages 2, 7, 8 · Open this rule
Activation Phase · Decision
What comes after this register?
This does not apply with the current options.
A robot that ends a register on the final checkpoint, with all checkpoints before it, wins the race at once.
Otherwise, resolve the next register. After Register 5, the round ends.
Rulebook pages 8, 10, 15
Choose
Rules for this step
Priority token
The player with the Priority token resolves each register first. Then the players to the left resolve theirs.
At the end of each round, the Priority token passes to the left. The youngest player has it in the first round.
Rulebook pages 3, 4, 7, 10 · Open this rule
Order of the board elements
In each register, after the programming cards:
- 1: blue conveyor belts. 2: green conveyor belts. 3: push panels. 4: gears. 5: board lasers.
- 6: robot weapons.
- 7: batteries. 8: checkpoints.
One element can move a robot onto another element that comes later in the order: it activates too.
Rulebook pages 2, 7, 8 · Open this rule
Activation Phase · Step
End the round
This does not apply with the current options.
After the end of Register 5:
- The player with the Priority token passes it to the left.
- Put the face-up damage cards of your registers on the damage discard pile.
- Put the face-up programming cards of your registers on your discard pile.
- Leave the face-down cards in your registers: a new Haywire stays for the next round.
Then start the next round.
Rulebook pages 10, 18
Next
Rules for this step
Priority token
The player with the Priority token resolves each register first. Then the players to the left resolve theirs.
At the end of each round, the Priority token passes to the left. The youngest player has it in the first round.
Rulebook pages 3, 4, 7, 10 · Open this rule
Haywire
A Haywire card goes face down, unseen, under the card of the current register. Next round it gives a wild effect in that register.
Each register holds 1 face-down Haywire. A second one in the same register goes face up to the damage discard pile: no damage.
You can look at your Haywires, but they stay in their registers. At the end of the round, discard only face-up cards. A revealed Haywire goes to the damage discard pile.
Rulebook pages 18, 19 · Open this rule
Order of the board elements
In each register, after the programming cards:
- 1: blue conveyor belts. 2: green conveyor belts. 3: push panels. 4: gears. 5: board lasers.
- 6: robot weapons.
- 7: batteries. 8: checkpoints.
One element can move a robot onto another element that comes later in the order: it activates too.
Rulebook pages 2, 7, 8 · Open this rule
Activation Phase · Step
Shuffle all your programming cards
Only with Less foreshadowing.
This does not apply with the current options.
Less foreshadowing: at the end of each round, shuffle your deck, your discard pile, and the regular cards of your hand together into a new programming deck.
Then you cannot know which cards come in your next hand.
Rulebook page 32
Next
Rules for this step
Less foreshadowing
For experienced players who shuffle well: at the end of each round, shuffle your deck, your discard pile, and the regular cards of your hand into a new deck.
Rulebook page 32 · Open this rule
Priority token
The player with the Priority token resolves each register first. Then the players to the left resolve theirs.
At the end of each round, the Priority token passes to the left. The youngest player has it in the first round.
Rulebook pages 3, 4, 7, 10 · Open this rule
Order of the board elements
In each register, after the programming cards:
- 1: blue conveyor belts. 2: green conveyor belts. 3: push panels. 4: gears. 5: board lasers.
- 6: robot weapons.
- 7: batteries. 8: checkpoints.
One element can move a robot onto another element that comes later in the order: it activates too.
Rulebook pages 2, 7, 8 · Open this rule
End
The first robot at the final checkpoint wins
This does not apply with the current options.
The race ends when a robot ends a register on the final checkpoint after all earlier checkpoints. Its player wins.
On a course with one checkpoint, the first robot to reach it wins.
Rulebook pages 3, 10, 15
The game is over. Select Start over for a new game.
Rules for this step
Goal of the gameHow to win
Robo Rally is a race for 2 to 6 players. Program your robot with cards to move through a dangerous factory.
Reach the checkpoints of the course in their order. The first robot at the final checkpoint wins. There are no points. See Checkpoints.
End of the game: the race ends at once when a robot ends a register on the final checkpoint, with all earlier checkpoints reached. Its player wins. See What comes after this register? and The first robot at the final checkpoint wins.
No tie: the rulebook gives no tiebreak. Two robots cannot share a space, so only one robot can end a register on the final checkpoint.
Rulebook pages 1, 3, 8, 10, 15 · Open this rule
Checkpoints
Reach the checkpoints in their order. When your robot ends a register on the checkpoint that you need next, move your checkpoint token to that number.
Example: your token is on 2, so you reached checkpoints 1 and 2. Your robot ends a register on checkpoint 3: move the token to 3. If 3 is the last checkpoint, you win.
A checkpoint blocks no move or laser. Board lasers through it work, but other board elements under it do not. A shut-down robot cannot reach a checkpoint.
Rulebook pages 8, 15, 19 · Open this rule
RuleHow to win
Goal of the game
This does not apply with the current options.
Robo Rally is a race for 2 to 6 players. Program your robot with cards to move through a dangerous factory.
Reach the checkpoints of the course in their order. The first robot at the final checkpoint wins. There are no points. See Checkpoints.
End of the game: the race ends at once when a robot ends a register on the final checkpoint, with all earlier checkpoints reached. Its player wins. See What comes after this register? and The first robot at the final checkpoint wins.
No tie: the rulebook gives no tiebreak. Two robots cannot share a space, so only one robot can end a register on the final checkpoint.
Rulebook pages 1, 3, 8, 10, 15
Rule
Components
This does not apply with the current options.
6 robot figures, 6 player mats, 1 Docking Bay board, 4 factory boards (both sides), 120 programming cards (6 decks of 20), 40 damage cards, 40 upgrade cards, 6 plastic checkpoints, 6 Reboot tokens, 6 Archive tokens, 8 Energy cubes, 6 checkpoint tokens, 1 Priority token, 1 player aid, and 1 sticker sheet.
Rulebook pages 1, 2
Rule
Cards win over the rulebook
This does not apply with the current options.
When a Haywire card or an upgrade breaks a rule of the rulebook, the card wins.
Rulebook pages 18, 20
Rule
Priority token
This does not apply with the current options.
The player with the Priority token resolves each register first. Then the players to the left resolve theirs.
At the end of each round, the Priority token passes to the left. The youngest player has it in the first round.
Rulebook pages 3, 4, 7, 10
Rule
Registers
This does not apply with the current options.
Each player mat has 5 registers. Each round, you put one programming card face down in each one. The cards resolve from Register 1 to Register 5.
A register card is any card in a register: a damage card or a regular programming card. Each register holds at most 1 face-down Haywire.
Rulebook pages 5, 18, 20
Rule
Programming cards
This does not apply with the current options.
Each deck has 20 regular cards:
- Move 1 (4), Move 2 (3), Move 3 (1): move that many spaces forward.
- Rotate Right (4), Rotate Left (4): turn 90 degrees in place.
- U-Turn (1): turn 180 degrees in place.
- Move Back (1): move 1 space backward, and keep the facing.
- Power Up (1): gain 1 Energy.
- Again (1): repeat the card of the previous register. In Register 1, it acts as SPAM.
A robot faces the direction of the arrow on its base. Damage cards are programming cards too, but they are not in the starting deck.
Rulebook page 11
Rule
Energy
This does not apply with the current options.
Each robot starts with 3 Energy, and stores at most 10. Energy that would go over 10 is lost.
Gain Energy at a battery at the end of a register, or with a Power Up card. Spend it on upgrades.
Rulebook pages 3, 8, 11
Rule
Upgrade cards
This does not apply with the current options.
Upgrades give new abilities, weapons, defenses, or moves. A card shows its Energy cost and its effect.
- Permanent (yellow): the effect lasts for the rest of the game. At most 3 installed.
- Temporary (red): use it once and discard it. At most 3 next to your mat. A movement upgrade works just before or after your card activates. The others work at any time.
To install a fourth of one type, discard an installed one of that type. When the upgrade deck is empty, shuffle its discard pile.
An upgrade that names a "card" means that card of your starting deck. An upgrade that names a maneuver works with any source of it.
Rulebook pages 4, 5, 20, 21, 23
Rule
Key terms
This does not apply with the current options.
- Adjacent: a space next to your robot, to the left, right, front, or back, and not through a wall.
- Register card: a card in one of your registers.
- Target robot: the nearest robot in a straight line in the direction that your weapon fires. Weapons fire forward unless a card says otherwise.
- Unoccupied: a space with no robot. Board elements do not occupy a space.
Rulebook page 20
Rule
Order of the board elements
This does not apply with the current options.
In each register, after the programming cards:
- 1: blue conveyor belts. 2: green conveyor belts. 3: push panels. 4: gears. 5: board lasers.
- 6: robot weapons.
- 7: batteries. 8: checkpoints.
One element can move a robot onto another element that comes later in the order: it activates too.
Rulebook pages 2, 7, 8
Rule
Blue conveyor belts
This does not apply with the current options.
A blue belt (two arrows on each space) conveys a robot 1 space in the direction of the arrow. If the robot is still on a blue belt, it conveys 1 more space.
A robot that conveys off the belt does not convey a second time. A blue belt can convey a robot onto a green belt, which then conveys it too.
All robots on belts of one colour convey at the same time.
Rulebook pages 8, 12, 14
Rule
Green conveyor belts
This does not apply with the current options.
A green belt conveys a robot 1 space in the direction of the arrow.
A green belt that conveys a robot onto a blue belt gives no blue move: the blue belts already activated.
Rulebook pages 8, 14
Rule
Conveyor belts: blocks and curves
This does not apply with the current options.
A belt that would convey a robot onto a space with another robot stops it on the last space of the belt. A belt never pushes. A robot does not convey off a belt when a robot or a wall is in the way.
Two robots that would convey into the same junction space both stay out of it.
A belt that conveys a robot onto a curved arrow turns the robot 90 degrees in that direction. A robot that arrives in another way does not turn. At a junction, it turns only when it comes from the side of the curved arrow.
Rulebook pages 12, 13, 16
Rule
Push panels
This does not apply with the current options.
A push panel pushes each robot on its space 1 space away from its wall. A line of robots all gets pushed.
It works only in the registers printed on it, for example 2 and 4. Push panels push after the belts, and before the gears.
Rulebook pages 8, 14
Rule
Gears
This does not apply with the current options.
A gear turns the robot on it 90 degrees in the direction of its arrows. Red gears turn left, and green gears turn right. Gears turn after the push panels.
Rulebook pages 8, 14
Rule
Board lasers
This does not apply with the current options.
A board laser fires from its red and white pointer on a wall. It hits only the nearest robot, and cannot fire through walls.
The robot draws 1 damage card for each beam: a double laser deals 2, one at a time.
Rulebook pages 8, 14
Rule
Batteries
This does not apply with the current options.
A robot that ends a register on a battery space gains 1 Energy, up to 10.
A shut-down robot gains no Energy. In the lighter game, batteries do nothing.
Rulebook pages 8, 14, 19, 32
Rule
Checkpoints
This does not apply with the current options.
Reach the checkpoints in their order. When your robot ends a register on the checkpoint that you need next, move your checkpoint token to that number.
Example: your token is on 2, so you reached checkpoints 1 and 2. Your robot ends a register on checkpoint 3: move the token to 3. If 3 is the last checkpoint, you win.
A checkpoint blocks no move or laser. Board lasers through it work, but other board elements under it do not. A shut-down robot cannot reach a checkpoint.
Rulebook pages 8, 15, 19
Rule
Pits and board edges
This does not apply with the current options.
A robot that moves into a pit or off the edge of a board, in any way, must reboot.
The edge is not a pit, even if the result is similar: an upgrade against pits does not help at an edge.
The black borders of the boards are not walls. Two spaces on both sides of a border are adjacent.
Rulebook pages 15, 16
Rule
Walls
This does not apply with the current options.
Robots cannot move or fire through walls. Other board elements do not block.
Example: with a wall 1 space ahead, a Move 2 moves 1 space and stops. The rest of the move is lost.
A robot on the other side of a wall is not adjacent.
Rulebook page 15
Rule
Robot lasers
This does not apply with the current options.
Each robot has a main laser that fires forward with no limit of range. It hits the nearest robot in line, unless a wall blocks it. The target draws 1 damage card.
Some upgrades fire in place of the main laser, and some fire with it.
Rulebook pages 8, 16, 20
Rule
Pushing robots
This does not apply with the current options.
A robot that moves into the space of another robot pushes it in the direction of the move, to the end of the move. A line of robots all gets pushed. Pushed robots keep their facing.
One move is one push, however far: a Move 3 pushes one time, for 3 spaces. A robot pushed into a wall stops, and so does the pusher. The rest of the move is lost.
Robots can be pushed into pits and off the board. A push does no damage. Belts never push.
Rulebook page 16
Rule
Damage cards
This does not apply with the current options.
A robot takes damage when it is shot or when it reboots. Draw damage cards from the damage deck, one at a time.
The deck has two kinds: SPAM and Haywire.
When the damage deck is empty, shuffle its discard pile. If that is empty too, take no damage in this register.
Rulebook page 17
Rule
SPAM
This does not apply with the current options.
A SPAM card goes on your own discard pile. It comes into your hand later, and it stays in your hand from round to round.
To get rid of SPAM, program it, or shut down. When a SPAM card is revealed in a register, put it on the damage discard pile. Put the top card of your deck face up in that register, and resolve it. Another SPAM repeats this.
Rulebook page 17
Rule
Haywire
This does not apply with the current options.
A Haywire card goes face down, unseen, under the card of the current register. Next round it gives a wild effect in that register.
Each register holds 1 face-down Haywire. A second one in the same register goes face up to the damage discard pile: no damage.
You can look at your Haywires, but they stay in their registers. At the end of the round, discard only face-up cards. A revealed Haywire goes to the damage discard pile.
Rulebook pages 18, 19
Rule
Shutdown
This does not apply with the current options.
A player with much SPAM can shut down after all players programmed, before Register 1 is revealed.
Reveal your registers. All damage cards of your registers, hand, and discard pile go to the damage discard pile. Your regular cards go to your discard pile.
The robot does nothing this round but stays on the board, open to belts, pushes, and lasers. Hint: shut down on a belt toward your next checkpoint.
Rulebook page 19
Rule
Rebooting
This does not apply with the current options.
A robot that falls into a pit or off the board reboots at once:
- Take the robot off the board and put it on your mat.
- Its program ends for this round. Discard the cards of the other registers and of your hand. SPAM in your registers goes to your discard pile, and Haywire to the damage discard pile.
- Draw 2 damage cards. SPAM goes to your discard pile. A Haywire goes face down in the register of the fall; a second one is discarded.
Upgrades stay, also the uninstalled ones. Each board has 1 Reboot token. A robot that falls off the Docking Bay reboots on its Archive token.
Rulebook pages 15, 19
Rule
Back on the board after a reboot
This does not apply with the current options.
Program the next round as usual, without the robot on the board. In Register 1, at your priority, put the robot on the Reboot token of the board where it fell. Choose its facing, and resolve Register 1.
If a robot is on that space, move it 1 space in the direction of the arrow of the token first. This is not a push.
Rulebook page 20
Rule
Race courses
This does not apply with the current options.
The rulebook has 13 courses, from Starter to Advanced, each with its boards, its checkpoints, and a length: short (45 minutes or less), medium, or long (76 minutes or more).
Match the picture exactly: the board names, the checkpoint numbers, and the Reboot arrows. A course can have a special rule.
To design your own course: criss-cross the checkpoints, keep them away from corners and pits, put one Reboot token on each board, and choose a fair side of the Docking Bay.
Rulebook pages 24, 25, 26, 27, 28, 29, 30
Rule
A lighter game
This does not apply with the current options.
For beginners and young players: play with no upgrades. Remove the Upgrade Phase, the upgrade cards, and the Energy track. The batteries do nothing.
Rulebook page 32
Rule
A less deadly game
Only with A less deadly game.
This does not apply with the current options.
Play without the rule of falling off the edge. Each board edge with no board next to it is an invisible wall. A robot that would move off the board hits the wall.
Rulebook page 32
Rule
A less SPAM-y game
This does not apply with the current options.
At the end of the Programming Phase, discard all SPAM of your hand to your own discard pile. You draw your other cards more often.
Rulebook page 32
Rule
Dynamic archiving
Only with Dynamic archiving.
This does not apply with the current options.
Use no Reboot tokens. When your robot ends a register on a checkpoint or a battery, put your Archive token there. A robot reboots at its Archive space.
If a robot occupies it, use the reboot rules: the arrow of the Archive token acts as the arrow of a Reboot token. The token does not change the board element under it.
Rulebook page 32
Rule
Competitive mode
This does not apply with the current options.
For experienced players: each player in priority order puts their Energy cube on a start space of the Docking Bay. Robots start only on the other start spaces. Then the cubes go back to 3.
Rulebook page 32
Rule
Act fast mode
This does not apply with the current options.
For experienced players: after all hands have 9 cards, a timer of 2 or 3 minutes starts. Empty registers at the end get random cards from your hand.
Rulebook page 32
Rule
Less foreshadowing
This does not apply with the current options.
For experienced players who shuffle well: at the end of each round, shuffle your deck, your discard pile, and the regular cards of your hand into a new deck.
Rulebook page 32
The steps in order
- Phase: Setup, then Choose a race course.
- Step: Choose a race course, then Choose a robot.
- Step: Choose a robot, then Shuffle the damage and upgrade decks.
- Step: Shuffle the damage and upgrade decks, then Block start spaces; or Put the robots on the Docking Bay.
- Step: Block start spaces, then Put the robots on the Docking Bay.
- Step: Put the robots on the Docking Bay, then Upgrade Phase; or Programming Phase.
- Phase: Upgrade Phase, then Draw, install, or uninstall upgrades.
- Step: Draw, install, or uninstall upgrades, then Programming Phase.
- Phase: Programming Phase, then Draw up to 9 cards.
- Step: Draw up to 9 cards, then Start the programming timer; or Program the 5 registers.
- Step: Start the programming timer, then Program the 5 registers.
- Step: Program the 5 registers, then Discard the SPAM in your hand; or Does a robot shut down?.
- Step: Discard the SPAM in your hand, then Does a robot shut down?.
- Decision: Does a robot shut down?, then No: activate: Activation Phase; or Yes: shut down: Shut down the robot.
- Step: Shut down the robot, then Activation Phase.
- Phase: Activation Phase, then A: reveal and resolve the register.
- Step: A: reveal and resolve the register, then B: activate the board elements.
- Step: B: activate the board elements, then B6: fire the robot lasers.
- Step: B6: fire the robot lasers, then C: batteries and checkpoints.
- Step: C: batteries and checkpoints, then What comes after this register?.
- Decision: What comes after this register?, then Next register: A: reveal and resolve the register; or After Register 5: End the round; or Final checkpoint: The first robot at the final checkpoint wins.
- Step: End the round, then Shuffle all your programming cards; or Upgrade Phase; or Programming Phase.
- Step: Shuffle all your programming cards, then Upgrade Phase; or Programming Phase.
Factory rules
- Goal of the gameHow to win
- Components
- Cards win over the rulebook
- Priority token
- Registers
- Programming cards
- Energy
- Upgrade cards
- Key terms
- Order of the board elements
- Blue conveyor belts
- Green conveyor belts
- Conveyor belts: blocks and curves
- Push panels
- Gears
- Board lasers
- Batteries
- Checkpoints
- Pits and board edges
- Walls
- Robot lasers
- Pushing robots
- Damage cards
- SPAM
- Haywire
- Shutdown
- Rebooting
- Back on the board after a reboot
- Race courses
- A lighter game
- A less deadly game
- A less SPAM-y game
- Dynamic archiving
- Competitive mode
- Act fast mode
- Less foreshadowing