Star Wars: X-Wing Second Edition rules
Pages refer to the Star Wars: X-Wing rulebook (Second Edition, English).
Phase
Setup
This does not apply with the current options.
Build the squads, choose the first player, place the obstacles, and place the ships at your edges.
Each player builds a squad with Quick Build cards to a threat level, or with squad points. Put out shields and charges, and give each ship its ID tokens.
The players take turns to place the 6 obstacles: beyond range 1 of each other and beyond range 2 of each edge. Then place the ships in initiative order, lowest first, within range 1 of your edge.
Rulebook page 5
Next
Steps of this phase
- Build the squads
- Gather your forces
- Choose the first player
- Make the play area
- Place the 6 obstacles
- Place the hyperspace markers
- Place the ships at your edge
- Shuffle the damage deck
Rules for this step
Friendly and enemy ships
A ship is friendly to all ships of its own squad, also to itself. It is an enemy ship to all ships of the other squad.
Rulebook page 18 · Open this rule
Ship sizes
The ships of the Core Set are small ships, with a base of about 4 cm. The rules are written for small ships.
Some expansion ships are medium or large. They follow the same rules with a few exceptions, for example more ion or tractor tokens to affect them.
Rules Reference, page 18.
Rulebook pages 12, 2 · Open this rule
Destroy all enemy shipsHow to win
Two players each control a squad of starfighters. A player wins when all enemy ships are destroyed.
End of the game: after the End phase of each round, check for a winner. When only one player has ships in the play area, that player wins. See The player with ships left wins.
Tie: when the last ships of both players are destroyed in the same round, the game is a draw. See Both squads are gone: a draw.
Escalation match: at the end of a round, the player who destroyed enemy ships with a total threat of more than twice the threat level wins. See Escalation match.
This rulebook teaches the rules with the ships of the Core Set. The Rules Reference has the rules for the ships of the expansions, and wins when the two do not agree. The draw is on page 20 of the Rules Reference.
Rulebook pages 2, 9, 16 · Open this rule
The components of the Core Set
- 3 ships (one T-65 X-wing, two TIE/ln fighters) with bases and pegs, and 3 maneuver dials. - 13 ship cards, 4 Quick Build cards, 20 upgrade cards, and 33 damage cards. - 11 maneuver templates, 1 range ruler, 6 dice (3 red, 3 green). - 6 obstacles (3 asteroids, 3 debris clouds), 2 hyperspace markers, 2 position markers, and the First Player marker. - Shields, charges, Force charges, and focus, evade, lock, stress, ion, disarm, and ID tokens.
Rulebook page 3 · Open this rule
Ships and ship cards
Each ship has a ship card, a ship token, and a plastic model on a base. Each ship type has its own maneuver dial.
- Initiative: the orange number; it sets the order of play. - Attack value: the red number of the primary weapon, with its arc. - Agility: the green number of defense dice. - Hull: the yellow number of damage cards that destroy the ship. - Shields: the blue number. - Action bar: the actions of the ship.
Rulebook pages 4, 5, 8, 10 · Open this rule
Setup · Step
Build the squads
This does not apply with the current options.
Each player chooses the ship cards and upgrade cards of their squad.
- Quick Build: agree on a threat level, and choose Quick Build options that add up to it. Threat level 8 is the normal game on a 3 by 3 foot area. - Squad points: build a squad of up to 200 points with the official squad builder.
In each mode, a card with bullets before its name is limited: a squad has at most one copy of the name for each bullet.
Rulebook pages 5, 15
Next
Rules for this step
Condition cards
A condition card is a lasting effect. It is not in play until an effect assigns it to a ship; then its text resolves. Put its condition marker next to the ship as a reminder.
Rulebook page 18 · Open this rule
Squad building
- Quick Build: each Quick Build option is a ship card, its upgrades, and a threat level of 1 to 5 bars. The players agree on a threat level and choose options that add up to it: 8 for a normal game on a 3 by 3 foot area. - Squad points: full control of pilots and upgrades. The limit is 200 points on a 3 by 3 foot area. The official squad builder lists the costs, checks the rules, and can change the costs by game mode. - Limited cards: the bullets before a name are the most copies of that name in a squad, as a ship card or an upgrade.
Rulebook page 15 · Open this rule
Upgrade cards
Upgrade cards customize a ship, for example with an astromech or ordnance. Equip them before the game starts. Put each one partly under the ship card or another upgrade, so that its text and art show.
The icon on the left side of the card is its type.
Rulebook page 12 · Open this rule
Friendly and enemy ships
A ship is friendly to all ships of its own squad, also to itself. It is an enemy ship to all ships of the other squad.
Rulebook page 18 · Open this rule
Ship sizes
The ships of the Core Set are small ships, with a base of about 4 cm. The rules are written for small ships.
Some expansion ships are medium or large. They follow the same rules with a few exceptions, for example more ion or tractor tokens to affect them.
Rules Reference, page 18.
Rulebook pages 12, 2 · Open this rule
Destroy all enemy shipsHow to win
Two players each control a squad of starfighters. A player wins when all enemy ships are destroyed.
End of the game: after the End phase of each round, check for a winner. When only one player has ships in the play area, that player wins. See The player with ships left wins.
Tie: when the last ships of both players are destroyed in the same round, the game is a draw. See Both squads are gone: a draw.
Escalation match: at the end of a round, the player who destroyed enemy ships with a total threat of more than twice the threat level wins. See Escalation match.
This rulebook teaches the rules with the ships of the Core Set. The Rules Reference has the rules for the ships of the expansions, and wins when the two do not agree. The draw is on page 20 of the Rules Reference.
Rulebook pages 2, 9, 16 · Open this rule
The components of the Core Set
- 3 ships (one T-65 X-wing, two TIE/ln fighters) with bases and pegs, and 3 maneuver dials. - 13 ship cards, 4 Quick Build cards, 20 upgrade cards, and 33 damage cards. - 11 maneuver templates, 1 range ruler, 6 dice (3 red, 3 green). - 6 obstacles (3 asteroids, 3 debris clouds), 2 hyperspace markers, 2 position markers, and the First Player marker. - Shields, charges, Force charges, and focus, evade, lock, stress, ion, disarm, and ID tokens.
Rulebook page 3 · Open this rule
Ships and ship cards
Each ship has a ship card, a ship token, and a plastic model on a base. Each ship type has its own maneuver dial.
- Initiative: the orange number; it sets the order of play. - Attack value: the red number of the primary weapon, with its arc. - Agility: the green number of defense dice. - Hull: the yellow number of damage cards that destroy the ship. - Shields: the blue number. - Action bar: the actions of the ship.
Rulebook pages 4, 5, 8, 10 · Open this rule
Setup · Step
Gather your forces
This does not apply with the current options.
Put your ships and upgrade cards in front of you. Put the shields and the charges of each ship card and upgrade card above it.
Give each ship three identical ID tokens: two go into its base, and one onto its ship card. One player uses the white numbers, the other the black numbers.
Rulebook pages 2, 5
Next
Rules for this step
Charges
A card with a charge limit (the golden number) starts with that many active charges. Its ability says when to spend one: flip it to its inactive side.
In the End phase, a card with a small arrow next to its charge limit recovers one charge: flip it back.
Rulebook page 12 · Open this rule
Shields and damage cards
There are two kinds of damage: hit (regular) damage and critical damage. A ship suffers all hit damage before the critical damage.
For each damage, flip an active shield to its inactive side. With no active shield left, the ship gets a damage card: face down for hit damage, face up for critical damage, and you resolve the text of a face-up card. A critical damage marker reminds you of a lasting effect.
To repair a face-up card, turn it face down. To repair a face-down card, discard it.
Rulebook pages 8, 9, 11 · Open this rule
Friendly and enemy ships
A ship is friendly to all ships of its own squad, also to itself. It is an enemy ship to all ships of the other squad.
Rulebook page 18 · Open this rule
Ship sizes
The ships of the Core Set are small ships, with a base of about 4 cm. The rules are written for small ships.
Some expansion ships are medium or large. They follow the same rules with a few exceptions, for example more ion or tractor tokens to affect them.
Rules Reference, page 18.
Rulebook pages 12, 2 · Open this rule
Destroy all enemy shipsHow to win
Two players each control a squad of starfighters. A player wins when all enemy ships are destroyed.
End of the game: after the End phase of each round, check for a winner. When only one player has ships in the play area, that player wins. See The player with ships left wins.
Tie: when the last ships of both players are destroyed in the same round, the game is a draw. See Both squads are gone: a draw.
Escalation match: at the end of a round, the player who destroyed enemy ships with a total threat of more than twice the threat level wins. See Escalation match.
This rulebook teaches the rules with the ships of the Core Set. The Rules Reference has the rules for the ships of the expansions, and wins when the two do not agree. The draw is on page 20 of the Rules Reference.
Rulebook pages 2, 9, 16 · Open this rule
The components of the Core Set
- 3 ships (one T-65 X-wing, two TIE/ln fighters) with bases and pegs, and 3 maneuver dials. - 13 ship cards, 4 Quick Build cards, 20 upgrade cards, and 33 damage cards. - 11 maneuver templates, 1 range ruler, 6 dice (3 red, 3 green). - 6 obstacles (3 asteroids, 3 debris clouds), 2 hyperspace markers, 2 position markers, and the First Player marker. - Shields, charges, Force charges, and focus, evade, lock, stress, ion, disarm, and ID tokens.
Rulebook page 3 · Open this rule
Ships and ship cards
Each ship has a ship card, a ship token, and a plastic model on a base. Each ship type has its own maneuver dial.
- Initiative: the orange number; it sets the order of play. - Attack value: the red number of the primary weapon, with its arc. - Agility: the green number of defense dice. - Hull: the yellow number of damage cards that destroy the ship. - Shields: the blue number. - Action bar: the actions of the ship.
Rulebook pages 4, 5, 8, 10 · Open this rule
Setup · Step
Choose the first player
This does not apply with the current options.
With squad points, the player with the lower squad total chooses who is the first player. Else choose the first player at random. The first player takes the First Player marker.
Rulebook page 5
Next
Rules for this step
Initiative
Each ship has an initiative value. Ships set up and activate from the lowest initiative, and engage from the highest.
When one player has ships with the same initiative, that player chooses their order. When both players have ships with the same initiative, the first player acts first with them.
Abilities with the same timing resolve in player order: the first player resolves all of theirs, then the other player.
Rulebook pages 4, 14 · Open this rule
Friendly and enemy ships
A ship is friendly to all ships of its own squad, also to itself. It is an enemy ship to all ships of the other squad.
Rulebook page 18 · Open this rule
Ship sizes
The ships of the Core Set are small ships, with a base of about 4 cm. The rules are written for small ships.
Some expansion ships are medium or large. They follow the same rules with a few exceptions, for example more ion or tractor tokens to affect them.
Rules Reference, page 18.
Rulebook pages 12, 2 · Open this rule
Destroy all enemy shipsHow to win
Two players each control a squad of starfighters. A player wins when all enemy ships are destroyed.
End of the game: after the End phase of each round, check for a winner. When only one player has ships in the play area, that player wins. See The player with ships left wins.
Tie: when the last ships of both players are destroyed in the same round, the game is a draw. See Both squads are gone: a draw.
Escalation match: at the end of a round, the player who destroyed enemy ships with a total threat of more than twice the threat level wins. See Escalation match.
This rulebook teaches the rules with the ships of the Core Set. The Rules Reference has the rules for the ships of the expansions, and wins when the two do not agree. The draw is on page 20 of the Rules Reference.
Rulebook pages 2, 9, 16 · Open this rule
The components of the Core Set
- 3 ships (one T-65 X-wing, two TIE/ln fighters) with bases and pegs, and 3 maneuver dials. - 13 ship cards, 4 Quick Build cards, 20 upgrade cards, and 33 damage cards. - 11 maneuver templates, 1 range ruler, 6 dice (3 red, 3 green). - 6 obstacles (3 asteroids, 3 debris clouds), 2 hyperspace markers, 2 position markers, and the First Player marker. - Shields, charges, Force charges, and focus, evade, lock, stress, ion, disarm, and ID tokens.
Rulebook page 3 · Open this rule
Ships and ship cards
Each ship has a ship card, a ship token, and a plastic model on a base. Each ship type has its own maneuver dial.
- Initiative: the orange number; it sets the order of play. - Attack value: the red number of the primary weapon, with its arc. - Agility: the green number of defense dice. - Hull: the yellow number of damage cards that destroy the ship. - Shields: the blue number. - Action bar: the actions of the ship.
Rulebook pages 4, 5, 8, 10 · Open this rule
Setup · Step
Make the play area
This does not apply with the current options.
Make a play area of 3 by 3 feet (91 cm), or use a playmat. The players can agree on another size. Each player takes one edge, opposite the other player.
Rulebook page 5
Next
Rules for this step
Friendly and enemy ships
A ship is friendly to all ships of its own squad, also to itself. It is an enemy ship to all ships of the other squad.
Rulebook page 18 · Open this rule
Ship sizes
The ships of the Core Set are small ships, with a base of about 4 cm. The rules are written for small ships.
Some expansion ships are medium or large. They follow the same rules with a few exceptions, for example more ion or tractor tokens to affect them.
Rules Reference, page 18.
Rulebook pages 12, 2 · Open this rule
Destroy all enemy shipsHow to win
Two players each control a squad of starfighters. A player wins when all enemy ships are destroyed.
End of the game: after the End phase of each round, check for a winner. When only one player has ships in the play area, that player wins. See The player with ships left wins.
Tie: when the last ships of both players are destroyed in the same round, the game is a draw. See Both squads are gone: a draw.
Escalation match: at the end of a round, the player who destroyed enemy ships with a total threat of more than twice the threat level wins. See Escalation match.
This rulebook teaches the rules with the ships of the Core Set. The Rules Reference has the rules for the ships of the expansions, and wins when the two do not agree. The draw is on page 20 of the Rules Reference.
Rulebook pages 2, 9, 16 · Open this rule
The components of the Core Set
- 3 ships (one T-65 X-wing, two TIE/ln fighters) with bases and pegs, and 3 maneuver dials. - 13 ship cards, 4 Quick Build cards, 20 upgrade cards, and 33 damage cards. - 11 maneuver templates, 1 range ruler, 6 dice (3 red, 3 green). - 6 obstacles (3 asteroids, 3 debris clouds), 2 hyperspace markers, 2 position markers, and the First Player marker. - Shields, charges, Force charges, and focus, evade, lock, stress, ion, disarm, and ID tokens.
Rulebook page 3 · Open this rule
Ships and ship cards
Each ship has a ship card, a ship token, and a plastic model on a base. Each ship type has its own maneuver dial.
- Initiative: the orange number; it sets the order of play. - Attack value: the red number of the primary weapon, with its arc. - Agility: the green number of defense dice. - Hull: the yellow number of damage cards that destroy the ship. - Shields: the blue number. - Action bar: the actions of the ship.
Rulebook pages 4, 5, 8, 10 · Open this rule
Setup · Step
Place the 6 obstacles
This does not apply with the current options.
In player order, the players take turns to choose an obstacle and place it, until all 6 are in the play area.
Each obstacle must be beyond range 1 of the other obstacles, and beyond range 2 of each edge of the play area.
Rulebook page 5
Next
Rules for this step
Obstacles
Obstacles do not make a ship back up: a ship that moves through or overlaps one suffers its effect after the maneuver.
- Asteroid: roll 1 attack die. A hit is 1 hit damage, a critical hit 1 critical damage. The ship skips its Perform Action step. A ship at range 0 of an asteroid cannot attack. - Debris cloud: gain 1 stress token, and roll 1 attack die. A critical hit is 1 critical damage.
An attack is obstructed when its range is measured through an obstacle: the defender rolls 1 more defense die. A ship in the way obstructs too, but has no effect of its own.
Rulebook page 15 · Open this rule
Measuring range
The range ruler has three bands: range 1, 2, and 3. Put it on the point of the first object that is closest to the second object, and aim it at the closest point of the second object. Measure from the plastic bases.
An object is at the range of the band over its closest point. Touching objects are at range 0, and an object is at range 0 of itself. An object is beyond a range when no part of it is within that range.
Rulebook page 4 · Open this rule
Friendly and enemy ships
A ship is friendly to all ships of its own squad, also to itself. It is an enemy ship to all ships of the other squad.
Rulebook page 18 · Open this rule
Ship sizes
The ships of the Core Set are small ships, with a base of about 4 cm. The rules are written for small ships.
Some expansion ships are medium or large. They follow the same rules with a few exceptions, for example more ion or tractor tokens to affect them.
Rules Reference, page 18.
Rulebook pages 12, 2 · Open this rule
Destroy all enemy shipsHow to win
Two players each control a squad of starfighters. A player wins when all enemy ships are destroyed.
End of the game: after the End phase of each round, check for a winner. When only one player has ships in the play area, that player wins. See The player with ships left wins.
Tie: when the last ships of both players are destroyed in the same round, the game is a draw. See Both squads are gone: a draw.
Escalation match: at the end of a round, the player who destroyed enemy ships with a total threat of more than twice the threat level wins. See Escalation match.
This rulebook teaches the rules with the ships of the Core Set. The Rules Reference has the rules for the ships of the expansions, and wins when the two do not agree. The draw is on page 20 of the Rules Reference.
Rulebook pages 2, 9, 16 · Open this rule
The components of the Core Set
- 3 ships (one T-65 X-wing, two TIE/ln fighters) with bases and pegs, and 3 maneuver dials. - 13 ship cards, 4 Quick Build cards, 20 upgrade cards, and 33 damage cards. - 11 maneuver templates, 1 range ruler, 6 dice (3 red, 3 green). - 6 obstacles (3 asteroids, 3 debris clouds), 2 hyperspace markers, 2 position markers, and the First Player marker. - Shields, charges, Force charges, and focus, evade, lock, stress, ion, disarm, and ID tokens.
Rulebook page 3 · Open this rule
Ships and ship cards
Each ship has a ship card, a ship token, and a plastic model on a base. Each ship type has its own maneuver dial.
- Initiative: the orange number; it sets the order of play. - Attack value: the red number of the primary weapon, with its arc. - Agility: the green number of defense dice. - Hull: the yellow number of damage cards that destroy the ship. - Shields: the blue number. - Action bar: the actions of the ship.
Rulebook pages 4, 5, 8, 10 · Open this rule
Setup · Step
Place the hyperspace markers
Only with Escalation match.
This does not apply with the current options.
In an Escalation match, each player builds a Quick Build squad of threat level 4. After the obstacles, the first player places hyperspace marker "1": beyond range 0 of all obstacles, and beyond range 1 of the edges.
Then the other player places marker "2" by the same rules, and beyond range 3 of marker "1".
Rulebook page 16
Next
Rules for this step
Escalation match
Each player builds a Quick Build squad of threat level 4. The players place two hyperspace markers after the obstacles.
In the End phase, each destroyed ship comes back as one or two Quick Build pilots with 1 more threat, at a side of a hyperspace marker that an attack die chooses.
At the end of a round, a player who destroyed enemy ships with a total threat of more than twice the threat level wins. When both did, play on until one total is higher.
Core Set Escalation: the Rebel starts with the Blue Squadron Escort, and can replace it with Luke Skywalker or Jek Porkins. The Imperial starts with 2 Academy Pilots, and replaces them with Iden Versio and Valen Rudor. Three destroyed TIE fighters win for the Rebel; the second destroyed X-wing wins for the Imperial.
Rulebook page 16 · Open this rule
Friendly and enemy ships
A ship is friendly to all ships of its own squad, also to itself. It is an enemy ship to all ships of the other squad.
Rulebook page 18 · Open this rule
Ship sizes
The ships of the Core Set are small ships, with a base of about 4 cm. The rules are written for small ships.
Some expansion ships are medium or large. They follow the same rules with a few exceptions, for example more ion or tractor tokens to affect them.
Rules Reference, page 18.
Rulebook pages 12, 2 · Open this rule
Destroy all enemy shipsHow to win
Two players each control a squad of starfighters. A player wins when all enemy ships are destroyed.
End of the game: after the End phase of each round, check for a winner. When only one player has ships in the play area, that player wins. See The player with ships left wins.
Tie: when the last ships of both players are destroyed in the same round, the game is a draw. See Both squads are gone: a draw.
Escalation match: at the end of a round, the player who destroyed enemy ships with a total threat of more than twice the threat level wins. See Escalation match.
This rulebook teaches the rules with the ships of the Core Set. The Rules Reference has the rules for the ships of the expansions, and wins when the two do not agree. The draw is on page 20 of the Rules Reference.
Rulebook pages 2, 9, 16 · Open this rule
The components of the Core Set
- 3 ships (one T-65 X-wing, two TIE/ln fighters) with bases and pegs, and 3 maneuver dials. - 13 ship cards, 4 Quick Build cards, 20 upgrade cards, and 33 damage cards. - 11 maneuver templates, 1 range ruler, 6 dice (3 red, 3 green). - 6 obstacles (3 asteroids, 3 debris clouds), 2 hyperspace markers, 2 position markers, and the First Player marker. - Shields, charges, Force charges, and focus, evade, lock, stress, ion, disarm, and ID tokens.
Rulebook page 3 · Open this rule
Ships and ship cards
Each ship has a ship card, a ship token, and a plastic model on a base. Each ship type has its own maneuver dial.
- Initiative: the orange number; it sets the order of play. - Attack value: the red number of the primary weapon, with its arc. - Agility: the green number of defense dice. - Hull: the yellow number of damage cards that destroy the ship. - Shields: the blue number. - Action bar: the actions of the ship.
Rulebook pages 4, 5, 8, 10 · Open this rule
Setup · Step
Place the ships at your edge
This does not apply with the current options.
Place the ships in initiative order, from the lowest to the highest. When ships have the same initiative, the first player places first. Each ship goes within range 1 of the edge of its player.
Rulebook page 5
Next
Rules for this step
Initiative
Each ship has an initiative value. Ships set up and activate from the lowest initiative, and engage from the highest.
When one player has ships with the same initiative, that player chooses their order. When both players have ships with the same initiative, the first player acts first with them.
Abilities with the same timing resolve in player order: the first player resolves all of theirs, then the other player.
Rulebook pages 4, 14 · Open this rule
Friendly and enemy ships
A ship is friendly to all ships of its own squad, also to itself. It is an enemy ship to all ships of the other squad.
Rulebook page 18 · Open this rule
Ship sizes
The ships of the Core Set are small ships, with a base of about 4 cm. The rules are written for small ships.
Some expansion ships are medium or large. They follow the same rules with a few exceptions, for example more ion or tractor tokens to affect them.
Rules Reference, page 18.
Rulebook pages 12, 2 · Open this rule
Destroy all enemy shipsHow to win
Two players each control a squad of starfighters. A player wins when all enemy ships are destroyed.
End of the game: after the End phase of each round, check for a winner. When only one player has ships in the play area, that player wins. See The player with ships left wins.
Tie: when the last ships of both players are destroyed in the same round, the game is a draw. See Both squads are gone: a draw.
Escalation match: at the end of a round, the player who destroyed enemy ships with a total threat of more than twice the threat level wins. See Escalation match.
This rulebook teaches the rules with the ships of the Core Set. The Rules Reference has the rules for the ships of the expansions, and wins when the two do not agree. The draw is on page 20 of the Rules Reference.
Rulebook pages 2, 9, 16 · Open this rule
The components of the Core Set
- 3 ships (one T-65 X-wing, two TIE/ln fighters) with bases and pegs, and 3 maneuver dials. - 13 ship cards, 4 Quick Build cards, 20 upgrade cards, and 33 damage cards. - 11 maneuver templates, 1 range ruler, 6 dice (3 red, 3 green). - 6 obstacles (3 asteroids, 3 debris clouds), 2 hyperspace markers, 2 position markers, and the First Player marker. - Shields, charges, Force charges, and focus, evade, lock, stress, ion, disarm, and ID tokens.
Rulebook page 3 · Open this rule
Ships and ship cards
Each ship has a ship card, a ship token, and a plastic model on a base. Each ship type has its own maneuver dial.
- Initiative: the orange number; it sets the order of play. - Attack value: the red number of the primary weapon, with its arc. - Agility: the green number of defense dice. - Hull: the yellow number of damage cards that destroy the ship. - Shields: the blue number. - Action bar: the actions of the ship.
Rulebook pages 4, 5, 8, 10 · Open this rule
Setup · Step
Shuffle the damage deck
This does not apply with the current options.
Shuffle the damage deck, and put it face down outside the play area. When each player has a damage deck, each uses their own.
Put the range rulers, the templates, the dice, and the tokens near the play area.
Rulebook page 5
Next
Rules for this step
Shields and damage cards
There are two kinds of damage: hit (regular) damage and critical damage. A ship suffers all hit damage before the critical damage.
For each damage, flip an active shield to its inactive side. With no active shield left, the ship gets a damage card: face down for hit damage, face up for critical damage, and you resolve the text of a face-up card. A critical damage marker reminds you of a lasting effect.
To repair a face-up card, turn it face down. To repair a face-down card, discard it.
Rulebook pages 8, 9, 11 · Open this rule
Friendly and enemy ships
A ship is friendly to all ships of its own squad, also to itself. It is an enemy ship to all ships of the other squad.
Rulebook page 18 · Open this rule
Ship sizes
The ships of the Core Set are small ships, with a base of about 4 cm. The rules are written for small ships.
Some expansion ships are medium or large. They follow the same rules with a few exceptions, for example more ion or tractor tokens to affect them.
Rules Reference, page 18.
Rulebook pages 12, 2 · Open this rule
Destroy all enemy shipsHow to win
Two players each control a squad of starfighters. A player wins when all enemy ships are destroyed.
End of the game: after the End phase of each round, check for a winner. When only one player has ships in the play area, that player wins. See The player with ships left wins.
Tie: when the last ships of both players are destroyed in the same round, the game is a draw. See Both squads are gone: a draw.
Escalation match: at the end of a round, the player who destroyed enemy ships with a total threat of more than twice the threat level wins. See Escalation match.
This rulebook teaches the rules with the ships of the Core Set. The Rules Reference has the rules for the ships of the expansions, and wins when the two do not agree. The draw is on page 20 of the Rules Reference.
Rulebook pages 2, 9, 16 · Open this rule
The components of the Core Set
- 3 ships (one T-65 X-wing, two TIE/ln fighters) with bases and pegs, and 3 maneuver dials. - 13 ship cards, 4 Quick Build cards, 20 upgrade cards, and 33 damage cards. - 11 maneuver templates, 1 range ruler, 6 dice (3 red, 3 green). - 6 obstacles (3 asteroids, 3 debris clouds), 2 hyperspace markers, 2 position markers, and the First Player marker. - Shields, charges, Force charges, and focus, evade, lock, stress, ion, disarm, and ID tokens.
Rulebook page 3 · Open this rule
Ships and ship cards
Each ship has a ship card, a ship token, and a plastic model on a base. Each ship type has its own maneuver dial.
- Initiative: the orange number; it sets the order of play. - Attack value: the red number of the primary weapon, with its arc. - Agility: the green number of defense dice. - Hull: the yellow number of damage cards that destroy the ship. - Shields: the blue number. - Action bar: the actions of the ship.
Rulebook pages 4, 5, 8, 10 · Open this rule
Phase
1. Planning phase
This does not apply with the current options.
Each player secretly sets a maneuver on the dial of each of their ships.
Turn the dial to the maneuver: speed, bearing, and difficulty. Put it face down next to its ship. A stressed ship cannot set a red maneuver. An ionized ship gets no dial.
Rulebook pages 6, 14
Next
Steps of this phase
Rules for this step
Maneuvers
A maneuver has a speed (the number), a bearing (the arrow), and a difficulty (the color). The template with the same speed and bearing moves the ship.
- Red: the ship gains a stress token. A stressed ship cannot set or execute red maneuvers. - White: no change. - Blue: the ship removes a stress token.
An effect that increases the difficulty makes blue white, and white red. Decreasing does the opposite.
Rulebook pages 6, 12 · Open this rule
1. Planning phase · Step
Set a dial for each ship
This does not apply with the current options.
Take the dial of the ship type, and turn it until the arrow points to the maneuver that you want. Put it face down in the play area next to its ship.
When all ships have dials, go to the System phase.
Rulebook page 6
Next
Rules for this step
Stress
A ship gains a stress token after a red maneuver or a red action, and removes one after a blue maneuver.
A stressed ship (one or more stress tokens) cannot set or execute red maneuvers, and cannot perform actions.
Rulebook pages 6, 7, 10 · Open this rule
Ion tokens
A ship is ionized with at least 1 ion token (small ship), 2 (medium), or 3 (large). An ionized ship gets no dial in the Planning phase.
When it activates, it skips revealing a dial, executes the ion maneuver (a blue [1 straight]), and can perform only the focus action. Then it removes all its ion tokens.
Some special weapons give ion tokens in place of damage.
Rulebook page 14 · Open this rule
Maneuvers
A maneuver has a speed (the number), a bearing (the arrow), and a difficulty (the color). The template with the same speed and bearing moves the ship.
- Red: the ship gains a stress token. A stressed ship cannot set or execute red maneuvers. - White: no change. - Blue: the ship removes a stress token.
An effect that increases the difficulty makes blue white, and white red. Decreasing does the opposite.
Rulebook pages 6, 12 · Open this rule
Phase
2. System phase
This does not apply with the current options.
Ships with a System phase ability use it now, in initiative order from the lowest.
The ships of the Core Set have no such ability. Some expansion ships do, for example to decloak.
Rulebook page 6
Next
Steps of this phase
2. System phase · Step
Resolve the System phase abilities
This does not apply with the current options.
Each ship with an ability for the System phase resolves it, from the lowest initiative to the highest.
Rulebook pages 6, 20
Next
Rules for this step
Reserve, docking, and deploying
A ship in reserve sits on its ship card. It gets no dial, cannot act or attack, and its abilities do not work unless they say so. An effect always places it in the play area later.
A ship that docks with a carrier goes into reserve. It can deploy in the System phase, or make an emergency deployment when the carrier is destroyed. Rules Reference, pages 9 and 10.
Rulebook pages 19, 2 · Open this rule
Cloak
The ship gains a cloak token. A cloaked ship has 2 more agility, is disarmed, and cannot cloak again.
In the System phase, a cloaked ship may spend the token to decloak: a small ship boosts or barrel rolls with the [2 straight] template, a medium or large ship with the [1 straight] template.
Rulebook page 17 · Open this rule
Phase
3. Activation phase
This does not apply with the current options.
Each ship activates one at a time, in initiative order from the lowest.
Reveal its dial, and execute the maneuver with the template. A red maneuver gives a stress token, and a blue one removes a stress token.
Then the ship may perform one action, unless it is stressed.
Rulebook pages 6, 7
Next
Steps of this phase
- Reveal the dial
- Does the ship end on another ship?
- Back up: a partial maneuver
- Check the difficulty and the obstacles
- Perform one action
- Did each ship activate?
Rules for this step
Initiative
Each ship has an initiative value. Ships set up and activate from the lowest initiative, and engage from the highest.
When one player has ships with the same initiative, that player chooses their order. When both players have ships with the same initiative, the first player acts first with them.
Abilities with the same timing resolve in player order: the first player resolves all of theirs, then the other player.
Rulebook pages 4, 14 · Open this rule
3. Activation phase · Step
Reveal the dial
This does not apply with the current options.
The next ship in initiative order activates. Turn its dial face up, and put it next to its ship card.
An ionized ship has no dial: it skips this step and executes the ion maneuver.
Rulebook pages 6, 14
Next
Rules for this step
Initiative
Each ship has an initiative value. Ships set up and activate from the lowest initiative, and engage from the highest.
When one player has ships with the same initiative, that player chooses their order. When both players have ships with the same initiative, the first player acts first with them.
Abilities with the same timing resolve in player order: the first player resolves all of theirs, then the other player.
Rulebook pages 4, 14 · Open this rule
3. Activation phase · Decision
Does the ship end on another ship?
This does not apply with the current options.
Take the template of the maneuver, and set it between the front guides of the ship. Pick up the ship, and place it at the other end of the template with its rear guides on the template. Return the template.
When the ship would end on top of another ship, it executes only part of the maneuver.
Rulebook pages 6, 13
Choose
Rules for this step
Maneuvers
A maneuver has a speed (the number), a bearing (the arrow), and a difficulty (the color). The template with the same speed and bearing moves the ship.
- Red: the ship gains a stress token. A stressed ship cannot set or execute red maneuvers. - White: no change. - Blue: the ship removes a stress token.
An effect that increases the difficulty makes blue white, and white red. Decreasing does the opposite.
Rulebook pages 6, 12 · Open this rule
Advanced maneuvers
- Koiogran turn: straight, then the ship turns 180 degrees: slide its front guides into the end of the template. - Tallon roll: a hard turn, and the ship turns 90 degrees more. Align the mark on the side of the base with the left, middle, or right of the end of the template. - Segnor's loop: a bank, then the ship turns around. - Stationary: the ship does not move, but counts as having executed a maneuver. - Reverse straight and bank: the template goes at the rear guides, and the ship moves backward.
A ship that cannot fully execute a Koiogran turn or a Tallon roll does not turn.
Rulebook pages 13, 14, 19 · Open this rule
Initiative
Each ship has an initiative value. Ships set up and activate from the lowest initiative, and engage from the highest.
When one player has ships with the same initiative, that player chooses their order. When both players have ships with the same initiative, the first player acts first with them.
Abilities with the same timing resolve in player order: the first player resolves all of theirs, then the other player.
Rulebook pages 4, 14 · Open this rule
3. Activation phase · Step
Back up: a partial maneuver
This does not apply with the current options.
Move the ship back along the template until its base is no longer on another base. Keep the marks in the middle of both guides over the middle line of the template.
Place it touching the last ship that it backed over. It can end where it started. The ship skips its Perform Action step.
A ship that moves through another ship, and ends clear of it, still executes the full maneuver.
Rulebook page 13
Next
Rules for this step
Position markers
When a ship is in the way of a maneuver, mark its position with a position marker, and lift it. Execute the maneuver, then put the ship back and remove the marker.
Rulebook page 7 · Open this rule
Initiative
Each ship has an initiative value. Ships set up and activate from the lowest initiative, and engage from the highest.
When one player has ships with the same initiative, that player chooses their order. When both players have ships with the same initiative, the first player acts first with them.
Abilities with the same timing resolve in player order: the first player resolves all of theirs, then the other player.
Rulebook pages 4, 14 · Open this rule
3. Activation phase · Step
Check the difficulty and the obstacles
This does not apply with the current options.
- Red maneuver: the ship gains 1 stress token. - Blue maneuver: the ship removes 1 stress token. - White maneuver: no change.
A ship that moved through or overlaps an obstacle suffers its effect now. A ship with any part of its base outside the play area flees: remove it from the game.
Rulebook pages 6, 11, 15
Next
Rules for this step
Stress
A ship gains a stress token after a red maneuver or a red action, and removes one after a blue maneuver.
A stressed ship (one or more stress tokens) cannot set or execute red maneuvers, and cannot perform actions.
Rulebook pages 6, 7, 10 · Open this rule
Obstacles
Obstacles do not make a ship back up: a ship that moves through or overlaps one suffers its effect after the maneuver.
- Asteroid: roll 1 attack die. A hit is 1 hit damage, a critical hit 1 critical damage. The ship skips its Perform Action step. A ship at range 0 of an asteroid cannot attack. - Debris cloud: gain 1 stress token, and roll 1 attack die. A critical hit is 1 critical damage.
An attack is obstructed when its range is measured through an obstacle: the defender rolls 1 more defense die. A ship in the way obstructs too, but has no effect of its own.
Rulebook page 15 · Open this rule
Fleeing the area
After a ship executes a maneuver, if any part of its base is outside the play area, it flees. As a destroyed ship, it is removed from the game.
Rulebook page 11 · Open this rule
Initiative
Each ship has an initiative value. Ships set up and activate from the lowest initiative, and engage from the highest.
When one player has ships with the same initiative, that player chooses their order. When both players have ships with the same initiative, the first player acts first with them.
Abilities with the same timing resolve in player order: the first player resolves all of theirs, then the other player.
Rulebook pages 4, 14 · Open this rule
3. Activation phase · Step
Perform one action
This does not apply with the current options.
The ship may perform one action from the action bar of its ship card, or an "Action:" ability of a card. A stressed ship cannot perform actions.
After a red action, the ship gains a stress token. After an action with a linked action, it may perform the linked action. A ship never performs the same action twice in a round.
Rulebook pages 7, 10, 11
Next
Rules for this step
Actions of the expansions
- Calculate: gain a calculate token. Spend it to change one focus result to a hit or an evade. - Coordinate: another friendly ship at range 1 to 2 performs an action. - Jam: a ship at range 1 gains a jam token. Then it removes a green token or breaks a lock, by the choice of the jamming player. - Reinforce: gain a fore or aft reinforce token. Defending against an attacker only in that full arc, reduce the damage by 1, to at least 1. - Reload: one missile, torpedo, or device upgrade recovers a charge; the ship gains a disarm token. - Rotate: turn the turret arc indicator to another arc. - SLAM: execute a maneuver of the same speed as this round, then gain a disarm token. Only in the Perform Action step.
Rulebook page 17 · Open this rule
Actions
A ship may perform one action in the Perform Action step of its activation. Card abilities can give more actions. The action bar on the right side of the ship card lists its actions.
- A ship cannot perform the same action twice in a round. - A red action gives the ship a stress token after it. - A linked action: after the action to its left, the ship may perform it. - An "Action:" ability of a card can be the action of the ship.
Rulebook pages 10, 11 · Open this rule
Focus
The ship gains a focus token. When it attacks, spend it in the Attack Dice step to change all focus results to hits. When it defends, spend it to change all focus results to evades.
Unspent focus tokens are removed in the End phase.
Rulebook page 10 · Open this rule
Evade
The ship gains an evade token. When it defends, spend it in the Defense Dice step to change one blank or focus result to an evade.
Unspent evade tokens are removed in the End phase.
Rulebook page 10 · Open this rule
Lock
Measure range to any number of ships, and choose one at range 0 to 3. Give it a lock token with the number of the ID token of your ship.
When the ship attacks a ship that it has locked, it can spend the lock in the Attack Dice step to reroll one or more attack dice. A ship keeps only one lock: a new lock removes the old one.
Rulebook page 11 · Open this rule
Barrel roll
Put the short edge of the [1 straight] template against the left or right side of the base, with its middle line on the mark of the base. Lift the ship, and place it at the other end so that the mark on its other side is at the front, middle, or back of that end.
A ship cannot barrel roll onto another ship, or through or onto an obstacle.
Rulebook page 10 · Open this rule
Boost
Choose the [1 straight], [1 left bank], or [1 right bank] template. Set it between the front guides, and place the ship at the other end.
A ship cannot boost onto another ship, or through or onto an obstacle.
Rulebook page 10 · Open this rule
Initiative
Each ship has an initiative value. Ships set up and activate from the lowest initiative, and engage from the highest.
When one player has ships with the same initiative, that player chooses their order. When both players have ships with the same initiative, the first player acts first with them.
Abilities with the same timing resolve in player order: the first player resolves all of theirs, then the other player.
Rulebook pages 4, 14 · Open this rule
3. Activation phase · Decision
Did each ship activate?
This does not apply with the current options.
Ships activate from the lowest initiative to the highest. For a tie of the same player, that player chooses the order; for a tie of both players, the first player goes first.
Bombs detonate at the end of the Activation phase.
Rulebook pages 4, 6, 18
Choose
Rules for this step
Devices: bombs and mines
A device upgrade lets a ship drop or launch a device. Drop: put the template at the rear guides, and slide the device onto its other end. Launch: the same at the front guides.
- Bombs detonate at the end of the Activation phase, and affect the ships near them. - Mines detonate when a ship moves through or overlaps them, and affect that ship.
Rulebook pages 18, 19 · Open this rule
Initiative
Each ship has an initiative value. Ships set up and activate from the lowest initiative, and engage from the highest.
When one player has ships with the same initiative, that player chooses their order. When both players have ships with the same initiative, the first player acts first with them.
Abilities with the same timing resolve in player order: the first player resolves all of theirs, then the other player.
Rulebook pages 4, 14 · Open this rule
Phase
4. Engagement phase
This does not apply with the current options.
Each ship engages one at a time, in initiative order from the highest: it may perform one attack.
An attack: declare a target in the firing arc at range 1 to 3, roll attack dice, roll defense dice, cancel hits with evades, and deal damage.
Ships with the same initiative fire at the same time: a destroyed ship still attacks before it leaves.
Rulebook pages 8, 11
Next
Steps of this phase
- Does the ship attack?
- 1. Declare the target
- 2. Roll the attack dice
- 3. Roll the defense dice
- 4. Does a hit stay?
- 5. Deal the damage
- 6. Aftermath
- Did each ship engage?
Rules for this step
Arcs
Each ship token has four standard arcs: front, rear, left, and right. A ship attacks from its firing arc: the shaded arc of its token.
- Bullseye arc: a narrow arc in the front arc. Only card abilities use it. - Full front and full rear arcs: they use the marks on the sides of the base. - Turret arcs: a turret indicator on the base points at a standard arc, which becomes a firing arc. A double turret has two opposite arcs.
Rulebook pages 8, 11, 18 · Open this rule
Measuring range
The range ruler has three bands: range 1, 2, and 3. Put it on the point of the first object that is closest to the second object, and aim it at the closest point of the second object. Measure from the plastic bases.
An object is at the range of the band over its closest point. Touching objects are at range 0, and an object is at range 0 of itself. An object is beyond a range when no part of it is within that range.
Rulebook page 4 · Open this rule
4. Engagement phase · Decision
Does the ship attack?
This does not apply with the current options.
The next ship in initiative order engages. It may perform one attack, with its primary weapon or a special weapon.
A ship needs an enemy ship in its firing arc at range 1 to 3. A ship at range 0 of an asteroid, or a disarmed ship, cannot attack.
Rulebook pages 8, 14, 15
Choose
Rules for this step
Disarm tokens
A ship with a disarm token is disarmed: it cannot perform attacks. Disarm tokens are orange and circular, so they are removed in the End phase.
Rulebook page 14 · Open this rule
Tractor tokens
A ship is tractored with at least 1 tractor token (small), 2 (medium), or 3 (large). The other player may then make it barrel roll or boost with the [1 straight] template, also onto an obstacle. This is not an action.
A ship with a tractor token rolls 1 fewer defense die.
Rulebook page 18 · Open this rule
Arcs
Each ship token has four standard arcs: front, rear, left, and right. A ship attacks from its firing arc: the shaded arc of its token.
- Bullseye arc: a narrow arc in the front arc. Only card abilities use it. - Full front and full rear arcs: they use the marks on the sides of the base. - Turret arcs: a turret indicator on the base points at a standard arc, which becomes a firing arc. A double turret has two opposite arcs.
Rulebook pages 8, 11, 18 · Open this rule
Measuring range
The range ruler has three bands: range 1, 2, and 3. Put it on the point of the first object that is closest to the second object, and aim it at the closest point of the second object. Measure from the plastic bases.
An object is at the range of the band over its closest point. Touching objects are at range 0, and an object is at range 0 of itself. An object is beyond a range when no part of it is within that range.
Rulebook page 4 · Open this rule
4. Engagement phase · Step
1. Declare the target
This does not apply with the current options.
Measure the range to any number of enemy ships, and see which are in the firing arc of the attacker. Choose one: the defender.
The target must have its base in the firing arc, at range 1 to 3. The attack range is measured to the closest point of the target in the arc.
Then choose the weapon and pay its costs.
Rulebook pages 8, 20
Next
Rules for this step
Arcs
Each ship token has four standard arcs: front, rear, left, and right. A ship attacks from its firing arc: the shaded arc of its token.
- Bullseye arc: a narrow arc in the front arc. Only card abilities use it. - Full front and full rear arcs: they use the marks on the sides of the base. - Turret arcs: a turret indicator on the base points at a standard arc, which becomes a firing arc. A double turret has two opposite arcs.
Rulebook pages 8, 11, 18 · Open this rule
Measuring range
The range ruler has three bands: range 1, 2, and 3. Put it on the point of the first object that is closest to the second object, and aim it at the closest point of the second object. Measure from the plastic bases.
An object is at the range of the band over its closest point. Touching objects are at range 0, and an object is at range 0 of itself. An object is beyond a range when no part of it is within that range.
Rulebook page 4 · Open this rule
Special weapons
An upgrade card with an "Attack:" header is a special weapon. A ship can attack with it in place of its primary weapon.
- Arc requirement: the target must be in this arc. - Attack value: the number of attack dice. - Range requirement: the attack range must be one of these ranges. - Range bonus icon: no range bonus with this weapon. - A symbol in the header, such as focus or lock: the attacker needs that token or lock.
Rulebook page 12 · Open this rule
4. Engagement phase · Step
2. Roll the attack dice
This does not apply with the current options.
The attacker rolls red attack dice equal to its attack value. At range 1 it rolls 1 more die, unless the weapon has no range bonus.
Then the defender may change the attack dice with its abilities, then the attacker. For example, spend a focus token to change all focus results to hits, or spend a lock to reroll dice.
Rulebook pages 8, 10, 11, 20
Next
Rules for this step
Range bonuses
An attack at range 1 rolls 1 more attack die. A defender at range 3 rolls 1 more defense die.
A special weapon with the range bonus icon gets no range bonus.
Rulebook pages 11, 12, 20 · Open this rule
Dice results
- Attack dice (red): hit, critical hit, focus, or blank. - Defense dice (green): evade, focus, or blank.
A focus result does nothing unless an effect changes it, for example a focus token or a Force charge.
Rulebook pages 8, 10, 12 · Open this rule
Arcs
Each ship token has four standard arcs: front, rear, left, and right. A ship attacks from its firing arc: the shaded arc of its token.
- Bullseye arc: a narrow arc in the front arc. Only card abilities use it. - Full front and full rear arcs: they use the marks on the sides of the base. - Turret arcs: a turret indicator on the base points at a standard arc, which becomes a firing arc. A double turret has two opposite arcs.
Rulebook pages 8, 11, 18 · Open this rule
Measuring range
The range ruler has three bands: range 1, 2, and 3. Put it on the point of the first object that is closest to the second object, and aim it at the closest point of the second object. Measure from the plastic bases.
An object is at the range of the band over its closest point. Touching objects are at range 0, and an object is at range 0 of itself. An object is beyond a range when no part of it is within that range.
Rulebook page 4 · Open this rule
4. Engagement phase · Step
3. Roll the defense dice
This does not apply with the current options.
The defender rolls green defense dice equal to its agility value. At range 3 it rolls 1 more die. When the attack is obstructed by an obstacle, it rolls 1 more die.
Then the attacker may change the defense dice with its abilities, then the defender. For example, spend an evade token to change a blank or focus result to an evade.
Rulebook pages 8, 10, 11, 15
Next
Rules for this step
Range bonuses
An attack at range 1 rolls 1 more attack die. A defender at range 3 rolls 1 more defense die.
A special weapon with the range bonus icon gets no range bonus.
Rulebook pages 11, 12, 20 · Open this rule
Obstacles
Obstacles do not make a ship back up: a ship that moves through or overlaps one suffers its effect after the maneuver.
- Asteroid: roll 1 attack die. A hit is 1 hit damage, a critical hit 1 critical damage. The ship skips its Perform Action step. A ship at range 0 of an asteroid cannot attack. - Debris cloud: gain 1 stress token, and roll 1 attack die. A critical hit is 1 critical damage.
An attack is obstructed when its range is measured through an obstacle: the defender rolls 1 more defense die. A ship in the way obstructs too, but has no effect of its own.
Rulebook page 15 · Open this rule
Arcs
Each ship token has four standard arcs: front, rear, left, and right. A ship attacks from its firing arc: the shaded arc of its token.
- Bullseye arc: a narrow arc in the front arc. Only card abilities use it. - Full front and full rear arcs: they use the marks on the sides of the base. - Turret arcs: a turret indicator on the base points at a standard arc, which becomes a firing arc. A double turret has two opposite arcs.
Rulebook pages 8, 11, 18 · Open this rule
Measuring range
The range ruler has three bands: range 1, 2, and 3. Put it on the point of the first object that is closest to the second object, and aim it at the closest point of the second object. Measure from the plastic bases.
An object is at the range of the band over its closest point. Touching objects are at range 0, and an object is at range 0 of itself. An object is beyond a range when no part of it is within that range.
Rulebook page 4 · Open this rule
4. Engagement phase · Decision
4. Does a hit stay?
This does not apply with the current options.
Each evade result cancels one hit or critical hit: remove both dice. Cancel all hits before any critical hits.
The attack hits when one or more hit or critical hit results stay. Else it misses.
Example of an attack on page 8: Luke Skywalker rolls a blank and 2 hits. The Academy Pilot rolls a focus, an evade, and a blank. The evade cancels one hit, so one hit stays: the attack hits, for 1 damage.
Example of dice:
Red attack die showing Blank, Red attack die showing Hit, Red attack die showing Hit = Luke Skywalker's attack: 2 hits
Green defense die showing Focus, Green defense die showing Evade, Green defense die showing Blank = The Academy Pilot's defense: 1 evade; the focus and the blank do nothing
Red attack die showing Hit = After the evade cancels one hit: 1 hit stays
- Red attack die
- Green defense die
- Hit
- Critical hit
- Focus
- Evade
- Blank
An example of the guide: an attack of 1 hit and 1 critical hit against 1 evade. The evade cancels the hit first, so the critical hit stays.
Example of dice:
Red attack die showing Hit, Red attack die showing Critical hit, Red attack die showing Blank = Attack: 1 hit and 1 critical hit
Green defense die showing Evade, Green defense die showing Blank = Defense: 1 evade
Red attack die showing Critical hit = After the evade cancels the hit: the critical hit stays
- Red attack die
- Green defense die
- Hit
- Critical hit
- Focus
- Evade
- Blank
Rulebook pages 8, 20
Choose
Rules for this step
Arcs
Each ship token has four standard arcs: front, rear, left, and right. A ship attacks from its firing arc: the shaded arc of its token.
- Bullseye arc: a narrow arc in the front arc. Only card abilities use it. - Full front and full rear arcs: they use the marks on the sides of the base. - Turret arcs: a turret indicator on the base points at a standard arc, which becomes a firing arc. A double turret has two opposite arcs.
Rulebook pages 8, 11, 18 · Open this rule
Measuring range
The range ruler has three bands: range 1, 2, and 3. Put it on the point of the first object that is closest to the second object, and aim it at the closest point of the second object. Measure from the plastic bases.
An object is at the range of the band over its closest point. Touching objects are at range 0, and an object is at range 0 of itself. An object is beyond a range when no part of it is within that range.
Rulebook page 4 · Open this rule
4. Engagement phase · Step
5. Deal the damage
This does not apply with the current options.
The defender suffers 1 damage for each hit and critical hit that stays. First all hit damage, then the critical damage.
For each damage, flip one active shield to its inactive side. With no active shield, the ship gets a damage card: face down for a hit, face up for a critical hit, and you resolve its text.
A ship with as many damage cards as its hull value is destroyed.
Rulebook pages 8, 20
Next
Rules for this step
Shields and damage cards
There are two kinds of damage: hit (regular) damage and critical damage. A ship suffers all hit damage before the critical damage.
For each damage, flip an active shield to its inactive side. With no active shield left, the ship gets a damage card: face down for hit damage, face up for critical damage, and you resolve the text of a face-up card. A critical damage marker reminds you of a lasting effect.
To repair a face-up card, turn it face down. To repair a face-down card, discard it.
Rulebook pages 8, 9, 11 · Open this rule
Destroying ships
A ship with as many damage cards as its hull value, or more, is destroyed. Put it on its ship card.
- Outside the Engagement phase: remove it at once. - In the Engagement phase: remove it after all ships with the initiative of the current ship have engaged. This simultaneous fire lets it still attack.
Rulebook pages 8, 11 · Open this rule
Arcs
Each ship token has four standard arcs: front, rear, left, and right. A ship attacks from its firing arc: the shaded arc of its token.
- Bullseye arc: a narrow arc in the front arc. Only card abilities use it. - Full front and full rear arcs: they use the marks on the sides of the base. - Turret arcs: a turret indicator on the base points at a standard arc, which becomes a firing arc. A double turret has two opposite arcs.
Rulebook pages 8, 11, 18 · Open this rule
Measuring range
The range ruler has three bands: range 1, 2, and 3. Put it on the point of the first object that is closest to the second object, and aim it at the closest point of the second object. Measure from the plastic bases.
An object is at the range of the band over its closest point. Touching objects are at range 0, and an object is at range 0 of itself. An object is beyond a range when no part of it is within that range.
Rulebook page 4 · Open this rule
4. Engagement phase · Step
6. Aftermath
This does not apply with the current options.
Resolve the abilities for "after defending", then those for "after attacking". Some abilities then give a bonus attack.
Rulebook pages 8, 20
Next
Rules for this step
Arcs
Each ship token has four standard arcs: front, rear, left, and right. A ship attacks from its firing arc: the shaded arc of its token.
- Bullseye arc: a narrow arc in the front arc. Only card abilities use it. - Full front and full rear arcs: they use the marks on the sides of the base. - Turret arcs: a turret indicator on the base points at a standard arc, which becomes a firing arc. A double turret has two opposite arcs.
Rulebook pages 8, 11, 18 · Open this rule
Measuring range
The range ruler has three bands: range 1, 2, and 3. Put it on the point of the first object that is closest to the second object, and aim it at the closest point of the second object. Measure from the plastic bases.
An object is at the range of the band over its closest point. Touching objects are at range 0, and an object is at range 0 of itself. An object is beyond a range when no part of it is within that range.
Rulebook page 4 · Open this rule
4. Engagement phase · Decision
Did each ship engage?
This does not apply with the current options.
Ships engage from the highest initiative to the lowest. A ship destroyed in this phase leaves after all ships with the initiative of the current ship have engaged.
Rulebook pages 8, 11
Choose
Rules for this step
Destroying ships
A ship with as many damage cards as its hull value, or more, is destroyed. Put it on its ship card.
- Outside the Engagement phase: remove it at once. - In the Engagement phase: remove it after all ships with the initiative of the current ship have engaged. This simultaneous fire lets it still attack.
Rulebook pages 8, 11 · Open this rule
Arcs
Each ship token has four standard arcs: front, rear, left, and right. A ship attacks from its firing arc: the shaded arc of its token.
- Bullseye arc: a narrow arc in the front arc. Only card abilities use it. - Full front and full rear arcs: they use the marks on the sides of the base. - Turret arcs: a turret indicator on the base points at a standard arc, which becomes a firing arc. A double turret has two opposite arcs.
Rulebook pages 8, 11, 18 · Open this rule
Measuring range
The range ruler has three bands: range 1, 2, and 3. Put it on the point of the first object that is closest to the second object, and aim it at the closest point of the second object. Measure from the plastic bases.
An object is at the range of the band over its closest point. Touching objects are at range 0, and an object is at range 0 of itself. An object is beyond a range when no part of it is within that range.
Rulebook page 4 · Open this rule
Phase
5. End phase
This does not apply with the current options.
Remove all circular (green and orange) tokens from the ships, and recover one charge on each card with a recovery arrow.
Then check who has ships left. With ships on both sides, a new round starts with the Planning phase.
Rulebook pages 9, 12, 14
Next
Steps of this phase
- Remove the circular tokens
- Who has ships left?
- Bring in the new ships
- Did a player destroy more than twice the threat level?
Rules for this step
Tokens and their colors
A ship gains a token from the supply, spends or removes it back to the supply, and can transfer it to another ship. Tokens move with their ship.
- Green, circular: good effects, removed in the End phase. - Orange, circular: bad effects, removed in the End phase. - Blue, square: good effects, removed as the token says. - Red, square: bad effects, removed as the token says.
Rulebook page 14 · Open this rule
5. End phase · Step
Remove the circular tokens
This does not apply with the current options.
Remove all green and orange circular tokens, for example focus, evade, and disarm tokens. Square tokens, such as stress and lock, stay.
Each card with a charge limit and a small arrow recovers one charge.
Rulebook pages 9, 10, 12, 14
Next
Rules for this step
Charges
A card with a charge limit (the golden number) starts with that many active charges. Its ability says when to spend one: flip it to its inactive side.
In the End phase, a card with a small arrow next to its charge limit recovers one charge: flip it back.
Rulebook page 12 · Open this rule
The Force
Pilots with a Force capacity (the purple number) have Force charges. They work as charges, and recover in the same way.
When attacking, spend any number of Force charges in the Attack Dice step to change that many focus results to hits. When defending, change that many focus results to evades.
Rulebook page 12 · Open this rule
Tokens and their colors
A ship gains a token from the supply, spends or removes it back to the supply, and can transfer it to another ship. Tokens move with their ship.
- Green, circular: good effects, removed in the End phase. - Orange, circular: bad effects, removed in the End phase. - Blue, square: good effects, removed as the token says. - Red, square: bad effects, removed as the token says.
Rulebook page 14 · Open this rule
5. End phase · Decision
Who has ships left?
Only with no Escalation match.
This does not apply with the current options.
The game ends at the end of a round when all ships of a player are gone: destroyed or fled.
Rules Reference, page 20: when the last ships of both players are destroyed in the same round, the game is a draw.
Rulebook pages 9, 2
Choose
Rules for this step
Tokens and their colors
A ship gains a token from the supply, spends or removes it back to the supply, and can transfer it to another ship. Tokens move with their ship.
- Green, circular: good effects, removed in the End phase. - Orange, circular: bad effects, removed in the End phase. - Blue, square: good effects, removed as the token says. - Red, square: bad effects, removed as the token says.
Rulebook page 14 · Open this rule
5. End phase · Step
Bring in the new ships
Only with Escalation match.
This does not apply with the current options.
For each ship destroyed this round, its player chooses one or two Quick Build pilots with a total threat 1 higher than the destroyed ship.
Choose a hyperspace marker, and roll 1 attack die. Place the new ship with its rear guides on the side of the marker that the result shows; on a critical hit, choose the side. When that place is taken, use the next side clockwise, then the other marker.
Rulebook page 16
Next
Rules for this step
Escalation match
Each player builds a Quick Build squad of threat level 4. The players place two hyperspace markers after the obstacles.
In the End phase, each destroyed ship comes back as one or two Quick Build pilots with 1 more threat, at a side of a hyperspace marker that an attack die chooses.
At the end of a round, a player who destroyed enemy ships with a total threat of more than twice the threat level wins. When both did, play on until one total is higher.
Core Set Escalation: the Rebel starts with the Blue Squadron Escort, and can replace it with Luke Skywalker or Jek Porkins. The Imperial starts with 2 Academy Pilots, and replaces them with Iden Versio and Valen Rudor. Three destroyed TIE fighters win for the Rebel; the second destroyed X-wing wins for the Imperial.
Rulebook page 16 · Open this rule
Tokens and their colors
A ship gains a token from the supply, spends or removes it back to the supply, and can transfer it to another ship. Tokens move with their ship.
- Green, circular: good effects, removed in the End phase. - Orange, circular: bad effects, removed in the End phase. - Blue, square: good effects, removed as the token says. - Red, square: bad effects, removed as the token says.
Rulebook page 14 · Open this rule
5. End phase · Decision
Did a player destroy more than twice the threat level?
Only with Escalation match.
This does not apply with the current options.
At the end of a round, a player wins when the enemy ships that they destroyed have a total threat of more than twice the threat level of the match.
When both players reach it, play on until one total is higher.
Rulebook page 16
Choose
Rules for this step
Tokens and their colors
A ship gains a token from the supply, spends or removes it back to the supply, and can transfer it to another ship. Tokens move with their ship.
- Green, circular: good effects, removed in the End phase. - Orange, circular: bad effects, removed in the End phase. - Blue, square: good effects, removed as the token says. - Red, square: bad effects, removed as the token says.
Rulebook page 14 · Open this rule
End
The player with ships left wins
This does not apply with the current options.
Only one player has ships in the play area: that player wins.
In an Escalation match, the player who destroyed the higher threat wins.
Rulebook pages 2, 9, 16
The game is over. Select Start over for a new game.
End
Both squads are gone: a draw
This does not apply with the current options.
The last ships of both players were destroyed in the same round. The game is a draw.
Rules Reference, page 20.
Rulebook pages 2, 9
The game is over. Select Start over for a new game.
RuleHow to win
Destroy all enemy ships
This does not apply with the current options.
Two players each control a squad of starfighters. A player wins when all enemy ships are destroyed.
End of the game: after the End phase of each round, check for a winner. When only one player has ships in the play area, that player wins. See The player with ships left wins.
Tie: when the last ships of both players are destroyed in the same round, the game is a draw. See Both squads are gone: a draw.
Escalation match: at the end of a round, the player who destroyed enemy ships with a total threat of more than twice the threat level wins. See Escalation match.
This rulebook teaches the rules with the ships of the Core Set. The Rules Reference has the rules for the ships of the expansions, and wins when the two do not agree. The draw is on page 20 of the Rules Reference.
Rulebook pages 2, 9, 16
Rule
The components of the Core Set
This does not apply with the current options.
- 3 ships (one T-65 X-wing, two TIE/ln fighters) with bases and pegs, and 3 maneuver dials. - 13 ship cards, 4 Quick Build cards, 20 upgrade cards, and 33 damage cards. - 11 maneuver templates, 1 range ruler, 6 dice (3 red, 3 green). - 6 obstacles (3 asteroids, 3 debris clouds), 2 hyperspace markers, 2 position markers, and the First Player marker. - Shields, charges, Force charges, and focus, evade, lock, stress, ion, disarm, and ID tokens.
Rulebook page 3
Rule
Ships and ship cards
This does not apply with the current options.
Each ship has a ship card, a ship token, and a plastic model on a base. Each ship type has its own maneuver dial.
- Initiative: the orange number; it sets the order of play. - Attack value: the red number of the primary weapon, with its arc. - Agility: the green number of defense dice. - Hull: the yellow number of damage cards that destroy the ship. - Shields: the blue number. - Action bar: the actions of the ship.
Rulebook pages 4, 5, 8, 10
Rule
Initiative
This does not apply with the current options.
Each ship has an initiative value. Ships set up and activate from the lowest initiative, and engage from the highest.
When one player has ships with the same initiative, that player chooses their order. When both players have ships with the same initiative, the first player acts first with them.
Abilities with the same timing resolve in player order: the first player resolves all of theirs, then the other player.
Rulebook pages 4, 14
Rule
Measuring range
This does not apply with the current options.
The range ruler has three bands: range 1, 2, and 3. Put it on the point of the first object that is closest to the second object, and aim it at the closest point of the second object. Measure from the plastic bases.
An object is at the range of the band over its closest point. Touching objects are at range 0, and an object is at range 0 of itself. An object is beyond a range when no part of it is within that range.
Rulebook page 4
Rule
Arcs
This does not apply with the current options.
Each ship token has four standard arcs: front, rear, left, and right. A ship attacks from its firing arc: the shaded arc of its token.
- Bullseye arc: a narrow arc in the front arc. Only card abilities use it. - Full front and full rear arcs: they use the marks on the sides of the base. - Turret arcs: a turret indicator on the base points at a standard arc, which becomes a firing arc. A double turret has two opposite arcs.
Rulebook pages 8, 11, 18
Rule
Range bonuses
This does not apply with the current options.
An attack at range 1 rolls 1 more attack die. A defender at range 3 rolls 1 more defense die.
A special weapon with the range bonus icon gets no range bonus.
Rulebook pages 11, 12, 20
Rule
Dice results
This does not apply with the current options.
- Attack dice (red): hit, critical hit, focus, or blank. - Defense dice (green): evade, focus, or blank.
A focus result does nothing unless an effect changes it, for example a focus token or a Force charge.
Rulebook pages 8, 10, 12
Rule
Friendly and enemy ships
This does not apply with the current options.
A ship is friendly to all ships of its own squad, also to itself. It is an enemy ship to all ships of the other squad.
Rulebook page 18
Rule
Ship sizes
This does not apply with the current options.
The ships of the Core Set are small ships, with a base of about 4 cm. The rules are written for small ships.
Some expansion ships are medium or large. They follow the same rules with a few exceptions, for example more ion or tractor tokens to affect them.
Rules Reference, page 18.
Rulebook pages 12, 2
Rule
Maneuvers
This does not apply with the current options.
A maneuver has a speed (the number), a bearing (the arrow), and a difficulty (the color). The template with the same speed and bearing moves the ship.
- Red: the ship gains a stress token. A stressed ship cannot set or execute red maneuvers. - White: no change. - Blue: the ship removes a stress token.
An effect that increases the difficulty makes blue white, and white red. Decreasing does the opposite.
Rulebook pages 6, 12
Rule
Advanced maneuvers
This does not apply with the current options.
- Koiogran turn: straight, then the ship turns 180 degrees: slide its front guides into the end of the template. - Tallon roll: a hard turn, and the ship turns 90 degrees more. Align the mark on the side of the base with the left, middle, or right of the end of the template. - Segnor's loop: a bank, then the ship turns around. - Stationary: the ship does not move, but counts as having executed a maneuver. - Reverse straight and bank: the template goes at the rear guides, and the ship moves backward.
A ship that cannot fully execute a Koiogran turn or a Tallon roll does not turn.
Rulebook pages 13, 14, 19
Rule
Position markers
This does not apply with the current options.
When a ship is in the way of a maneuver, mark its position with a position marker, and lift it. Execute the maneuver, then put the ship back and remove the marker.
Rulebook page 7
Rule
Fleeing the area
This does not apply with the current options.
After a ship executes a maneuver, if any part of its base is outside the play area, it flees. As a destroyed ship, it is removed from the game.
Rulebook page 11
Rule
Obstacles
This does not apply with the current options.
Obstacles do not make a ship back up: a ship that moves through or overlaps one suffers its effect after the maneuver.
- Asteroid: roll 1 attack die. A hit is 1 hit damage, a critical hit 1 critical damage. The ship skips its Perform Action step. A ship at range 0 of an asteroid cannot attack. - Debris cloud: gain 1 stress token, and roll 1 attack die. A critical hit is 1 critical damage.
An attack is obstructed when its range is measured through an obstacle: the defender rolls 1 more defense die. A ship in the way obstructs too, but has no effect of its own.
Rulebook page 15
Rule
Actions
This does not apply with the current options.
A ship may perform one action in the Perform Action step of its activation. Card abilities can give more actions. The action bar on the right side of the ship card lists its actions.
- A ship cannot perform the same action twice in a round. - A red action gives the ship a stress token after it. - A linked action: after the action to its left, the ship may perform it. - An "Action:" ability of a card can be the action of the ship.
Rulebook pages 10, 11
Rule
Focus
This does not apply with the current options.
The ship gains a focus token. When it attacks, spend it in the Attack Dice step to change all focus results to hits. When it defends, spend it to change all focus results to evades.
Unspent focus tokens are removed in the End phase.
Rulebook page 10
Rule
Evade
This does not apply with the current options.
The ship gains an evade token. When it defends, spend it in the Defense Dice step to change one blank or focus result to an evade.
Unspent evade tokens are removed in the End phase.
Rulebook page 10
Rule
Lock
This does not apply with the current options.
Measure range to any number of ships, and choose one at range 0 to 3. Give it a lock token with the number of the ID token of your ship.
When the ship attacks a ship that it has locked, it can spend the lock in the Attack Dice step to reroll one or more attack dice. A ship keeps only one lock: a new lock removes the old one.
Rulebook page 11
Rule
Barrel roll
This does not apply with the current options.
Put the short edge of the [1 straight] template against the left or right side of the base, with its middle line on the mark of the base. Lift the ship, and place it at the other end so that the mark on its other side is at the front, middle, or back of that end.
A ship cannot barrel roll onto another ship, or through or onto an obstacle.
Rulebook page 10
Rule
Boost
This does not apply with the current options.
Choose the [1 straight], [1 left bank], or [1 right bank] template. Set it between the front guides, and place the ship at the other end.
A ship cannot boost onto another ship, or through or onto an obstacle.
Rulebook page 10
Rule
Actions of the expansions
This does not apply with the current options.
- Calculate: gain a calculate token. Spend it to change one focus result to a hit or an evade. - Coordinate: another friendly ship at range 1 to 2 performs an action. - Jam: a ship at range 1 gains a jam token. Then it removes a green token or breaks a lock, by the choice of the jamming player. - Reinforce: gain a fore or aft reinforce token. Defending against an attacker only in that full arc, reduce the damage by 1, to at least 1. - Reload: one missile, torpedo, or device upgrade recovers a charge; the ship gains a disarm token. - Rotate: turn the turret arc indicator to another arc. - SLAM: execute a maneuver of the same speed as this round, then gain a disarm token. Only in the Perform Action step.
Rulebook page 17
Rule
Cloak
This does not apply with the current options.
The ship gains a cloak token. A cloaked ship has 2 more agility, is disarmed, and cannot cloak again.
In the System phase, a cloaked ship may spend the token to decloak: a small ship boosts or barrel rolls with the [2 straight] template, a medium or large ship with the [1 straight] template.
Rulebook page 17
Rule
Shields and damage cards
This does not apply with the current options.
There are two kinds of damage: hit (regular) damage and critical damage. A ship suffers all hit damage before the critical damage.
For each damage, flip an active shield to its inactive side. With no active shield left, the ship gets a damage card: face down for hit damage, face up for critical damage, and you resolve the text of a face-up card. A critical damage marker reminds you of a lasting effect.
To repair a face-up card, turn it face down. To repair a face-down card, discard it.
Rulebook pages 8, 9, 11
Rule
Destroying ships
This does not apply with the current options.
A ship with as many damage cards as its hull value, or more, is destroyed. Put it on its ship card.
- Outside the Engagement phase: remove it at once. - In the Engagement phase: remove it after all ships with the initiative of the current ship have engaged. This simultaneous fire lets it still attack.
Rulebook pages 8, 11
Rule
Stress
This does not apply with the current options.
A ship gains a stress token after a red maneuver or a red action, and removes one after a blue maneuver.
A stressed ship (one or more stress tokens) cannot set or execute red maneuvers, and cannot perform actions.
Rulebook pages 6, 7, 10
Rule
Ion tokens
This does not apply with the current options.
A ship is ionized with at least 1 ion token (small ship), 2 (medium), or 3 (large). An ionized ship gets no dial in the Planning phase.
When it activates, it skips revealing a dial, executes the ion maneuver (a blue [1 straight]), and can perform only the focus action. Then it removes all its ion tokens.
Some special weapons give ion tokens in place of damage.
Rulebook page 14
Rule
Disarm tokens
This does not apply with the current options.
A ship with a disarm token is disarmed: it cannot perform attacks. Disarm tokens are orange and circular, so they are removed in the End phase.
Rulebook page 14
Rule
Tractor tokens
This does not apply with the current options.
A ship is tractored with at least 1 tractor token (small), 2 (medium), or 3 (large). The other player may then make it barrel roll or boost with the [1 straight] template, also onto an obstacle. This is not an action.
A ship with a tractor token rolls 1 fewer defense die.
Rulebook page 18
Rule
Tokens and their colors
This does not apply with the current options.
A ship gains a token from the supply, spends or removes it back to the supply, and can transfer it to another ship. Tokens move with their ship.
- Green, circular: good effects, removed in the End phase. - Orange, circular: bad effects, removed in the End phase. - Blue, square: good effects, removed as the token says. - Red, square: bad effects, removed as the token says.
Rulebook page 14
Rule
Charges
This does not apply with the current options.
A card with a charge limit (the golden number) starts with that many active charges. Its ability says when to spend one: flip it to its inactive side.
In the End phase, a card with a small arrow next to its charge limit recovers one charge: flip it back.
Rulebook page 12
Rule
The Force
This does not apply with the current options.
Pilots with a Force capacity (the purple number) have Force charges. They work as charges, and recover in the same way.
When attacking, spend any number of Force charges in the Attack Dice step to change that many focus results to hits. When defending, change that many focus results to evades.
Rulebook page 12
Rule
Special weapons
This does not apply with the current options.
An upgrade card with an "Attack:" header is a special weapon. A ship can attack with it in place of its primary weapon.
- Arc requirement: the target must be in this arc. - Attack value: the number of attack dice. - Range requirement: the attack range must be one of these ranges. - Range bonus icon: no range bonus with this weapon. - A symbol in the header, such as focus or lock: the attacker needs that token or lock.
Rulebook page 12
Rule
Upgrade cards
This does not apply with the current options.
Upgrade cards customize a ship, for example with an astromech or ordnance. Equip them before the game starts. Put each one partly under the ship card or another upgrade, so that its text and art show.
The icon on the left side of the card is its type.
Rulebook page 12
Rule
Condition cards
This does not apply with the current options.
A condition card is a lasting effect. It is not in play until an effect assigns it to a ship; then its text resolves. Put its condition marker next to the ship as a reminder.
Rulebook page 18
Rule
Devices: bombs and mines
This does not apply with the current options.
A device upgrade lets a ship drop or launch a device. Drop: put the template at the rear guides, and slide the device onto its other end. Launch: the same at the front guides.
- Bombs detonate at the end of the Activation phase, and affect the ships near them. - Mines detonate when a ship moves through or overlaps them, and affect that ship.
Rulebook pages 18, 19
Rule
Reserve, docking, and deploying
This does not apply with the current options.
A ship in reserve sits on its ship card. It gets no dial, cannot act or attack, and its abilities do not work unless they say so. An effect always places it in the play area later.
A ship that docks with a carrier goes into reserve. It can deploy in the System phase, or make an emergency deployment when the carrier is destroyed. Rules Reference, pages 9 and 10.
Rulebook pages 19, 2
Rule
Squad building
This does not apply with the current options.
- Quick Build: each Quick Build option is a ship card, its upgrades, and a threat level of 1 to 5 bars. The players agree on a threat level and choose options that add up to it: 8 for a normal game on a 3 by 3 foot area. - Squad points: full control of pilots and upgrades. The limit is 200 points on a 3 by 3 foot area. The official squad builder lists the costs, checks the rules, and can change the costs by game mode. - Limited cards: the bullets before a name are the most copies of that name in a squad, as a ship card or an upgrade.
Rulebook page 15
Rule
Escalation match
Only with Escalation match.
This does not apply with the current options.
Each player builds a Quick Build squad of threat level 4. The players place two hyperspace markers after the obstacles.
In the End phase, each destroyed ship comes back as one or two Quick Build pilots with 1 more threat, at a side of a hyperspace marker that an attack die chooses.
At the end of a round, a player who destroyed enemy ships with a total threat of more than twice the threat level wins. When both did, play on until one total is higher.
Core Set Escalation: the Rebel starts with the Blue Squadron Escort, and can replace it with Luke Skywalker or Jek Porkins. The Imperial starts with 2 Academy Pilots, and replaces them with Iden Versio and Valen Rudor. Three destroyed TIE fighters win for the Rebel; the second destroyed X-wing wins for the Imperial.
Rulebook page 16
The steps in order
- Phase: Setup, then Build the squads.
- Step: Build the squads, then Gather your forces.
- Step: Gather your forces, then Choose the first player.
- Step: Choose the first player, then Make the play area.
- Step: Make the play area, then Place the 6 obstacles.
- Step: Place the 6 obstacles, then Place the ships at your edge; or Place the hyperspace markers.
- Step: Place the hyperspace markers, then Place the ships at your edge.
- Step: Place the ships at your edge, then Shuffle the damage deck.
- Step: Shuffle the damage deck, then 1. Planning phase.
- Phase: 1. Planning phase, then Set a dial for each ship.
- Step: Set a dial for each ship, then 2. System phase.
- Phase: 2. System phase, then Resolve the System phase abilities.
- Step: Resolve the System phase abilities, then 3. Activation phase.
- Phase: 3. Activation phase, then Reveal the dial.
- Step: Reveal the dial, then Does the ship end on another ship?.
- Decision: Does the ship end on another ship?, then No: Check the difficulty and the obstacles; or Yes: partial: Back up: a partial maneuver.
- Step: Back up: a partial maneuver, then Check the difficulty and the obstacles.
- Step: Check the difficulty and the obstacles, then Perform one action.
- Step: Perform one action, then Did each ship activate?.
- Decision: Did each ship activate?, then No: next ship: Reveal the dial; or Yes: 4. Engagement phase.
- Phase: 4. Engagement phase, then Does the ship attack?.
- Decision: Does the ship attack?, then Yes: attack: 1. Declare the target; or No: Did each ship engage?.
- Step: 1. Declare the target, then 2. Roll the attack dice.
- Step: 2. Roll the attack dice, then 3. Roll the defense dice.
- Step: 3. Roll the defense dice, then 4. Does a hit stay?.
- Decision: 4. Does a hit stay?, then Yes: it hits: 5. Deal the damage; or No: it misses: 6. Aftermath.
- Step: 5. Deal the damage, then 6. Aftermath.
- Step: 6. Aftermath, then Did each ship engage?.
- Decision: Did each ship engage?, then No: next ship: Does the ship attack?; or Yes: 5. End phase.
- Phase: 5. End phase, then Remove the circular tokens.
- Step: Remove the circular tokens, then Who has ships left?; or Bring in the new ships.
- Decision: Who has ships left?, then Both: next round: 1. Planning phase; or Only one player: The player with ships left wins; or Nobody: Both squads are gone: a draw.
- Step: Bring in the new ships, then Did a player destroy more than twice the threat level?.
- Decision: Did a player destroy more than twice the threat level?, then No: next round: 1. Planning phase; or Yes, one player: The player with ships left wins.
Ships, range, and arcs
- Destroy all enemy shipsHow to win
- The components of the Core Set
- Ships and ship cards
- Initiative
- Measuring range
- Arcs
- Range bonuses
- Dice results
- Friendly and enemy ships
- Ship sizes
Maneuvers and obstacles
Actions
Damage, tokens, and cards
- Shields and damage cards
- Destroying ships
- Stress
- Ion tokens
- Disarm tokens
- Tractor tokens
- Tokens and their colors
- Charges
- The Force
- Special weapons
- Upgrade cards
- Condition cards
- Devices: bombs and mines
- Reserve, docking, and deploying